Findstandards.Info

BSI Standards

	BSI Standards(Cheapest & Original) 9

Click to enlarge image

Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/portal/index.asp?typeid=1

http://www.findstandards.info/portal/index.asp?typeid=2

http://www.findstandards.info/portal/index.asp?typeid=3

http://www.findstandards.info/portal/index.asp?typeid=4

http://www.findstandards.info/portal/index.asp?typeid=5

BS EN 15030:2006 BS EN 15030:2006. Chemicals used for treatment of water intended for human consumption. Silver salts for the conservation of drinking water for intermittent use
BS EN 15029:2006 BS EN 15029:2006. Products used for treatment of water intended for human consumption. Iron (III) hydroxide oxide
BS EN 15028:2006 BS EN 15028:2006. Chemicals used for treatment of water intended for human consumption. Sodium chlorate
NA to BS EN 1991-1-7:2006 NA to BS EN 1991-1-7:2006. National Annex to Eurocode 1. Actions on structures. Accidental actions
BS ISO 9988-2:2006 BS ISO 9988-2:2006. Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Preparation of test specimens and determination of properties
09/30128274 DC 09/30128274 DC. NA to BS EN 1997-2. UK National Annex to Eurocode 7. Geotechnical design. Part 2. Ground investigation and testing
BS ISO 22493:2008 BS ISO 22493:2008. Microbeam analysis. Scanning electron microscopy. Vocabulary
NA to BS EN 1993-1-11:2006 NA to BS EN 1993-1-11:2006. UK National Annex to Eurocode 3. Design of steel structures. Design of structures with tension components
NA to BS EN 1993-1-10:2005 NA to BS EN 1993-1-10:2005. National Annex (informative) to Eurocode 3. Design of steel structures. Material toughness and through thickness properties
NA to BS EN 1993-1-8:2005 NA to BS EN 1993-1-8:2005. UK National Annex to Eurocode 3. Design of steel structures. Design of joints
NA to BS EN 1993-1-4:2006 NA to BS EN 1993-1-4:2006. UK National Annex to Eurocode 3. Design of steel structures. General rules. Supplementary rules for stainless steels
NA to BS EN 1993-1-3:2006 NA to BS EN 1993-1-3:2006. UK National Annex to Eurocode 3. Design of steel structures. General rules. Supplementary rules for cold-formed members and sheeting
NA to BS EN 1993-1-2:2005 NA to BS EN 1993-1-2:2005. UK National Annex to Eurocode 3. Design of steel structures. General rules. Structural fire design
NA to BS EN 1993-1-1:2005 NA to BS EN 1993-1-1:2005. UK National Annex to Eurocode 3. Design of steel structures. General rules and rules for buildings
08/30128080 DC 08/30128080 DC. BS ISO/IEC 19770-2. Software asset management. Part 2. Software identification tag
ISO22951 : 2009 ED1 ISO22951 : 2009 ED1. Data dictionary and message sets for pre-emption and Prioritization signal systems for emergency and public transport vehicles (PRESTO)
BS EN ISO 15927-6:2007 BS EN ISO 15927-6:2007. Hygrothermal performance of buildings. Calculation and presentation of climatic data. Accumulated temperature differences (degree days)
BS EN ISO 6946:2007 BS EN ISO 6946:2007. Building components and building elements. Thermal resistance and thermal transmittance. Calculation method
BS ISO 15364:2007 BS ISO 15364:2007. Ships and marine technology. Pressure/vacuum valves for cargo tanks
BS ISO 19730:2008 BS ISO 19730:2008. Soil quality. Extraction of trace elements from soil using ammonium nitrate solution
09/30127481 DC 09/30127481 DC. BS ISO 7967-9. Reciprocating internal combustion engines. Vocabulary of components and systems. Part 9. Control and monitoring systems
"ISO/IEC24747 : 2009 ED1 ISO/IEC24747 : 2009 ED1. Information technology. Programming languages, their environments and system software interfaces. Extensions to the C Library to support mathematical s"
NA to BS EN 1991-1-4:2005 NA to BS EN 1991-1-4:2005. UK National Annex to Eurocode 1. Actions on structures. General actions. Wind actions
BS ISO 80000-11:2008 BS ISO 80000-11:2008. Quantities and units. Characteristic numbers
BS ISO 80000-9:2009 BS ISO 80000-9:2009. Quantities and units. Physical chemistry and molecular physics
BS ISO 80000-7:2008 BS ISO 80000-7:2008. Quantities and units. Light
BS EN 80000-6:2008 BS EN 80000-6:2008. Quantities and units. Electromagnetism
BS ISO 22915-3:2008 BS ISO 22915-3:2008. Industrial trucks. Verification of stability. Reach and straddle trucks
BS ISO 22915-2:2008 BS ISO 22915-2:2008. Industrial trucks. Verification of stability. Counterbalanced trucks with mast
BS ISO 22915-1:2008 BS ISO 22915-1:2008. Industrial trucks. Verification of stability. General
"BS EN 10088-5:2009 BS EN 10088-5:2009. Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes"
BS EN ISO 10407-2:2008 BS EN ISO 10407-2:2008. Petroleum and natural gas industries. Rotary drilling equipment. Inspection and classification of used drill stem elements
BS EN 13082:2008 BS EN 13082:2008. Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve
BS EN 13081:2008 BS EN 13081:2008. Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and coupler
BS EN ISO 15403-1:2008 BS EN ISO 15403-1:2008. Natural gas. Natural gas for use as a compressed fuel for vehicles. Designation of the quality
BS ISO 21927-1:2008 BS ISO 21927-1:2008. Smoke and heat control systems. Specification for smoke barriers
"09/30125465 DC 09/30125465 DC. BS ISO 8769. Reference sources. Calibration of surface contamination monitors. Alpha-, beta- and photon emitters"
ISO9278 : 2008 EDTN2 ISO9278 : 2008 EDTN2. ISO9278 : 2008 Nuclear energy - Uranium dioxide pellets - Determination of density and volume fraction of open and closed porosity
"BS EN 15609:2008 BS EN 15609:2008. LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft. Installation requirements"
BS EN 61758-1:2008 BS EN 61758-1:2008. Fibre optic interconnecting devices and passive components. Interface standard for closures. General and guidance
BS EN 62343-1-2:2008 BS EN 62343-1-2:2008. Dynamic modules. Performance standards. Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C)
BS EN 61300-3-2:2009 BS EN 61300-3-2:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polarization dependent loss
"BS EN 1094-1:2008 BS EN 1094-1:2008. Insulating refractory products. Terminology, classification and methods of test for high temperature insulation wool products"
"BS EN 13598-2:2009 BS EN 13598-2:2009. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)."
"PD CEN/TR 15068:2009 PD CEN/TR 15068:2009. Gas welding equipment. Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering. Measurement method"
BS EN 50216-10:2009 BS EN 50216-10:2009. Power transformer and reactor fittings. Oil-to-air heat exchangers
BS ISO 6279:2006 BS ISO 6279:2006. Plain bearings. Aluminium alloys for solid bearings
BS IEC 61577-4:2009 BS IEC 61577-4:2009. Radiation protection instrumentation. Radon and radon decay product measuring instruments. Equipment for the production of reference atmospheres containing rad
BS ISO 15112:2007 BS ISO 15112:2007. Natural gas. Energy determination
BS EN 12409:2008 BS EN 12409:2008. Plastics and rubber machines. Thermoforming machines. Safety requirements
BS EN 62369-1:2009 BS EN 62369-1:2009. Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz. Fields
"BS EN ISO 15181-4:2008, BS 3900-K4:2008 BS EN ISO 15181-4:2008, BS 3900-K4:2008. Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of pyridine-trip"
BS EN ISO 10218-1:2006 BS EN ISO 10218-1:2006. Robots for industrial environments. Safety requirements. Robot
BS ISO 15754:2009 BS ISO 15754:2009. Paper and board. Determination of z-directional tensile strength
BS EN ISO 11348-3:2008 BS EN ISO 11348-3:2008. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using
BS EN ISO 11348-2:2008 BS EN ISO 11348-2:2008. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using
BS EN ISO 11348-1:2008 BS EN ISO 11348-1:2008. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using
BS EN 13126-10:2008 BS EN 13126-10:2008. Building hardware. Requirements and test methods for windows and doors height windows. Arm-balancing systems
BS ISO/IEC 19757-8:2008 BS ISO/IEC 19757-8:2008. Information technology. Document schema definition languages (DSDL). Document semantics renaming language (DSRL)
08/30121777 DC 08/30121777 DC. BS ISO/IEC 19757-5. Information technology. Document Schema Definition Languages (DSDL). Part 5. Extensible datatypes
BS ISO 21243:2008 BS ISO 21243:2008. Radiation protection. Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies.
BS EN 1398:2009 BS EN 1398:2009. Dock levellers. Safety requirements
BS ISO 10129:2006 BS ISO 10129:2006. Plain bearings. Testing of bearing materials. Resistance to corrosion by lubricants under static conditions
BS ISO 21011:2008 BS ISO 21011:2008. Cryogenic vessels. Valves for cryogenic service
BS ISO 21013-3:2006 BS ISO 21013-3:2006. Cryogenic vessels. Pressure-relief accessories for cryogenic service. Sizing and capacity determination
"BS EN 61310-3:2008 BS EN 61310-3:2008. Safety of machinery. Indication, marking and actuation. Requirements for the location and operation of actuators"
"BS EN 61310-2:2008 BS EN 61310-2:2008. Safety of machinery. Indication, marking and actuation. Requirements for marking"
"BS EN 61310-1:2008 BS EN 61310-1:2008. Safety of machinery. Indication, marking and actuation. Requirements for visual, acoustic and tactile signals"
BS EN 725-3:2007 BS EN 725-3:2007. Advanced technical ceramics. Methods of test for ceramic powders. Determination of the oxygen content of nonoxides by thermal extraction with a carrier gas
"BS EN 15004-1:2008 BS EN 15004-1:2008. Fixed firefighting systems. Gas extinguishing systems. Design, installation and maintenance"
"BS EN 15001-2:2008 BS EN 15001-2:2008. Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial"
"BS EN 15000:2008 BS EN 15000:2008. Safety of industrial trucks. Self propelled variable reach trucks. Specification, performance and test requirements for longitudinal load moment indicators and longi"
DD CEN/TS 45545-6:2009 DD CEN/TS 45545-6:2009. Railway applications. Fire protection on railway vehicles. Fire control and management systems
BS ISO 5598:2008 BS ISO 5598:2008. Fluid power systems and components. Vocabulary
BS EN ISO 10350-1:2008 BS EN ISO 10350-1:2008. Plastics. Acquisition and presentation of comparable single-point data. Moulding materials
BS EN ISO 13789:2007 BS EN ISO 13789:2007. Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method
"BS EN 61326-3-1:2008 BS EN 61326-3-1:2008. Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and for equipment intend"
BS EN 80416-1:2009 BS EN 80416-1:2009. Basic principles for graphical symbols for use on equipment. Creation of graphical symbols for registration
BS EN ISO 3826-2:2008 BS EN ISO 3826-2:2008. Plastics collapsible containers for human blood and blood components. Graphical symbols for use on labels and instruction leaflets
"BS EN 747-1:2007 BS EN 747-1:2007. Furniture. Bunk beds and high beds for domestic use. Safety, strength and durability requirements"
BS EN ISO 23993:2008 BS EN ISO 23993:2008. Thermal insulation products for building equipment and Industrial installations. Determination of design thermal conductivity
BS EN ISO 6872:2008 BS EN ISO 6872:2008. Dentistry. Ceramic materials
"ISO/IECTR24732 : 2009 ED1 ISO/IECTR24732 : 2009 ED1. Information technology. Programming languages, their environments and system software interfaces. Extension for the programming language C to suppo"
BS EN 747-2:2007 BS EN 747-2:2007. Furniture. Bunk beds and high beds for domestic use. Test methods
BS ISO 21350:2007 BS ISO 21350:2007. Space systems. Off-the-shelf item utilization
BS ISO 5416:2006 BS ISO 5416:2006. Direct reduced iron. Determination of metallic iron. Bromine-methanol titrimetric method
BS EN 61649:2008 BS EN 61649:2008. Weibull analysis
BS EN ISO 9241-300:2008 BS EN ISO 9241-300:2008. Ergonomics of human-system interaction. Introduction to electronic visual display requirements
BS EN 62271-1:2008 BS EN 62271-1:2008. High-voltage switchgear and controlgear. Common specifications
BS EN 81-40:2008 BS EN 81-40:2008. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Stairlifts and inclined lifting platforms intended
BS EN 60137:2008 BS EN 60137:2008. Insulated bushings for alternating voltages above 1000 V
"BS EN 61952:2008 BS EN 61952:2008. Insulators for overhead lines. Composite line post insulators for A.C. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance c"
BS EN 13245-2:2008 BS EN 13245-2:2008. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. PVC-U profiles and PVC-UE profiles for internal and external wall and ce
BS ISO 6395:2008 BS ISO 6395:2008. Earth-moving machinery. Determination of sound power level. Dynamic test conditions
BS ISO 6393:2008 BS ISO 6393:2008. Earth-moving machinery. Determination of sound power level noise emissions. Stationary test conditions
BS EN ISO 6802:2008 BS EN ISO 6802:2008. Rubber and plastics hoses and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing
BS EN ISO 4641:2008 BS EN ISO 4641:2008. Rubber hoses and hose assemblies for water suction and discharge. Specification
BS EN 1501-3:2008 BS EN 1501-3:2008. Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Front loaded refuse collection vehicles
"BS EN 50242:2008, BS EN 60436:2008 BS EN 50242:2008, BS EN 60436:2008. Electric dishwashers for household use. Methods for measuring the performance"
BS EN ISO 16634-1:2008 BS EN ISO 16634-1:2008. Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content. O
PAS 67:2008 PAS 67:2008. Laboratory tests to determine the heating and electrical performance of heat-led micro-cogeneration packages primarily intended for heating dwellings
BS EN 61467:2008 BS EN 61467:2008. Insulators for overhead lines. Insulator strings and sets for lines with a nominal voltage greater than 1000 V. AC power arc tests
BS EN 60904-3:2008 BS EN 60904-3:2008. Photovoltaic devices. Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
"BS ISO 9707:2008 BS ISO 9707:2008. Information and documentation. Statistics on the production and distribution of books, newspapers, periodicals and electronic publications"
PD ISO/IEC TR 24714-1:2008 PD ISO/IEC TR 24714-1:2008. Information technology. Biometrics. Jurisdictional and societal considerations for commercial applications. General guidance
BS ISO/IEC 24708:2008 BS ISO/IEC 24708:2008. Information technology. Biometrics. BioAPI Interworking Protocol
09/30107264 DC 09/30107264 DC. BS ISO 24612. Language resource management. Linguistic annotation framework (LAF)
BS EN 13718-1:2008 BS EN 13718-1:2008. Medical vehicles and their equipment. Air ambulances. Requirements for medical devices used in air ambulances
BS EN 14805:2008 BS EN 14805:2008. Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using non-membrane technology
BS EN ISO 2082:2008 BS EN ISO 2082:2008. Metallic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel
BS EN ISO 11612:2008 BS EN ISO 11612:2008. Protective clothing. Clothing to protect against heat and flame
BS EN 14846:2008 BS EN 14846:2008. Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods
BS ISO 19003:2006 BS ISO 19003:2006. Rubber and rubber products. Guidance on the application of statistics to physical testing
BS ISO 21789:2009 BS ISO 21789:2009. Gas turbine applications. Safety
PD CEN/TR 15276-1:2009 PD CEN/TR 15276-1:2009. Fixed firefighting systems. Condensed aerosol extinguishing systems. Requirements and test methods for components
"PD CEN/TR 15276-2:2009 PD CEN/TR 15276-2:2009. Fixed firefighting systems. Condensed aerosol extinguishing systems. Design, installation and maintenance"
BS EN ISO 10846-2:2008 BS EN ISO 10846-2:2008. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Direct method for determination of the dynam
BS EN 60730-2-6:2008 BS EN 60730-2-6:2008. Automatic electrical controls for household and similar use. Particular requirements for automatic electrical pressure sensing controls including mechanical
BS EN ISO 2081:2008 BS EN ISO 2081:2008. Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel
"BS ISO 7207-1:2007 BS ISO 7207-1:2007. Implants for surgery. Components for partial and total knee joint prostheses. Classification, definitions and designation of dimensions"
BS ISO 13356:2008 BS ISO 13356:2008. Implants for surgery. Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
BS EN 61784-3:2008 BS EN 61784-3:2008. Industrial communication networks. Profiles. Functional safety fieldbuses. General rules and profile definitions
BS EN 61784-2:2008 BS EN 61784-2:2008. Industrial communication networks. Profiles. Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
BS ISO 817:2005 BS ISO 817:2005. Refrigerants. Designation system
BS ISO 17334:2008 BS ISO 17334:2008. Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding
BS ISO/IEC 19793:2008 BS ISO/IEC 19793:2008. Information technology. Open distributed processing. Use of UML for ODP viewpoint specifications
BS EN 62374:2007 BS EN 62374:2007. Semiconductor devices. Time dependent dielectric breakdown (TDDB) test for gate dielectric films
BS EN 10253-3:2008 BS EN 10253-3:2008. Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
08/30099658 DC 08/30099658 DC. BS ISO 16900-4. Respiratory protective devices. Methods of test and test equipment. Part 4. Determination of gas filter capacity
08/30099655 DC 08/30099655 DC. BS ISO 16900-3. Respiratory protective devices. Methods of test and test equipment. Part 3. Determination of particle filter penetration
08/30099651 DC 08/30099651 DC. BS ISO 16900-1. Respiratory protective devices. Methods of test and test equipment. Part 1. Determination of inward leakage
BS ISO 5832-9:2007 BS ISO 5832-9:2007. Implants for surgery. Metallic materials. Wrought high nitrogen stainless steel
BS ISO 5832-1:2007 BS ISO 5832-1:2007. Implants for surgery. Metallic materials. Wrought stainless steel
BS ISO 16454:2007 BS ISO 16454:2007. Space systems. Structural design. Stress analysis requirements
BS EN ISO 9241-410:2008 BS EN ISO 9241-410:2008. Ergonomics of human-system interaction. Physical input devices. Design criteria for products
ISO17512-1 : 2008 EDTN1 ISO17512-1 : 2008 EDTN1. ISO17512 : 2008 Soil quality - Avoidance test for determining the quality of soils and effects of chemicals on behaviour. Part 1:Test with earthworms (
BS EN ISO 10846-1:2008 BS EN ISO 10846-1:2008. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Principles and guidelines
BS EN 15381:2008 BS EN 15381:2008. Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays
BS EN ISO 10993-7:2008 BS EN ISO 10993-7:2008. Biological evaluation of medical devices. Ethylene oxide sterilization residuals
BS EN 61076-3-001:2008 BS EN 61076-3-001:2008. Connectors for electronic equipment. Product requirements. Rectangular connectors. Blank detail specification
BS EN 61076-3:2008 BS EN 61076-3:2008. Connectors for electronic equipment. Product requirements. Rectangular connectors. Sectional specification
09/30096507 DC 09/30096507 DC. BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
BS EN ISO 5263-3:2004 BS EN ISO 5263-3:2004. Pulps. Laboratory wet disintegration. Disintegration of mechanical pulps at greater than or equal to 85 °C
BS EN 45502-2-2:2008 BS EN 45502-2-2:2008. Active implantable medical devices. Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable de
"BS EN 417:2003 BS EN 417:2003. Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and ma"
BS ISO 16402:2008 BS ISO 16402:2008. Implants for surgery. Acrylic resin cement. Flexural fatigue testing of acrylic resin cements used in orthopaedics
BS ISO 5832-5:2005 BS ISO 5832-5:2005. Implants for surgery. Metallic materials. Wrought cobalt-chromium-tungsten-nickel alloy
BS IEC 60870-5-6:2006 BS IEC 60870-5-6:2006. Telecontrol equipment and systems. Guidelines for conformance testing for the IEC 60870-5 companion standards
"BS EN ISO 14116:2008 BS EN ISO 14116:2008. Protective clothing. Protection against heat and flame. Limited flame spread materials, material assemblies and clothing"
BS EN ISO 21534:2007 BS EN ISO 21534:2007. Non-active surgical implants. Joint replacement implants. Particular requirements
BS EN ISO 4373:2008 BS EN ISO 4373:2008. Hydrometry. Water level measuring devices
BS EN 15220-1:2008 BS EN 15220-1:2008. Railway applications. Brake indicators. Pneumatically operated brake indicators
BS EN 15327-1:2008 BS EN 15327-1:2008. Railway applications. Passenger alarm subsystem. General requirements and passenger interface for the passenger emergency brake system
BS EN 60730-2-3:2007 BS EN 60730-2-3:2007. Automatic electrical controls for household and similar use. Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
"BS ISO 7176-5:2008 BS ISO 7176-5:2008. Wheelchairs. Determination of dimensions, mass and manoeuvring space"
BS EN 62282-3-3:2008 BS EN 62282-3-3:2008. Fuel cell technologies. Stationary fuel cell power systems. Installation
BS ISO 4195:2007 BS ISO 4195:2007. Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods
08/30087659 DC 08/30087659 DC. BS ISO 10140-5. Acoustics. Laboratory measurement of sound insulation of building elements. Part 5. Requirements for test facilities and equipment
08/30087655 DC 08/30087655 DC. BS ISO 10140-4. Acoustics. Laboratory measurement of sound insulation of building elements. Part 4. Measurement procedures and requirements
08/30087650 DC 08/30087650 DC. BS ISO 10140-3. Acoustics. Laboratory measurement of sound insulation of building elements. Part 3. Measurement of impact sound insulation
08/30087646 DC 08/30087646 DC. BS ISO 10140-2. Acoustics. Laboratory measurement of sound insulation of building elements. Part 2. Measurement of airborne sound insulation
08/30087642 DC 08/30087642 DC. BS ISO 10140-1. Acoustics. Laboratory measurement of sound insulation of building elements. Part 1. Test codes
"BS 6100-12:2008 BS 6100-12:2008. Building and civil engineering. Vocabulary. Plant, equipment and persons"
"BS 6100-5:2009 BS 6100-5:2009. Building and civil engineering. Vocabulary. Civil engineering. Water engineering, environmental engineering and pipe lines"
ISO/IEC15444-10 : 2008 EDTN1 ISO/IEC15444-10 : 2008 EDTN1. ISO/IEC15444-10 : 2008 Information technology. JPEG 2000 image coding system. Part 10: Extensions for three-dimensional data
BS ISO 12639:2004 BS ISO 12639:2004. Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT)
08/30084137 DC 08/30084137 DC. BS ISO 22538-6. Space systems. Oxygen safety. Part 6. Facility planning and implementation
DD 8483:2008 DD 8483:2008. Cranes. Condition monitoring. Specification for data logging equipment
BS EN ISO 734-2:2008 BS EN ISO 734-2:2008. Oilseed meals. Determination of oil content. Rapid extraction method
09/30082031 DC 09/30082031 DC. BS ISO/IEC 19763-4. Information technology. Metamodel framework for interoperability (MFI). Part 4. Metamodel for model mapping
BS ISO 4706:2008 BS ISO 4706:2008. Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below
BS ISO 9697:2008 BS ISO 9697:2008. Water quality. Measurement of gross beta activity in non-saline water. Thick source method
BS EN 60598-1:2008 BS EN 60598-1:2008. Luminaires. General requirements and tests
"BS EN 14506:2005 BS EN 14506:2005. Devices to prevent pollution by backflow of potable Water. Automatic diverter. Family H, type C"
BS EN 62059-31-1:2008 BS EN 62059-31-1:2008. Electricity metering equipment. Dependability. Accelerated reliability testing. Elevated temperature and humidity
"BS EN 50413:2009 BS EN 50413:2009. Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)"
BS EN ISO 4126-3:2006 BS EN ISO 4126-3:2006. Safety devices for protection against excessive pressure. Safety valves and bursting disc safety devices in combination
"BS EN 61189-5:2006 BS EN 61189-5:2006. Test methods for electrical materials, interconnection structures and assemblies. Test methods for printed board assemblies"
BS EN 1434-3:2008 BS EN 1434-3:2008. Heat Meters. Data exchange and interfaces
BS ISO 14347:2008 BS ISO 14347:2008. Fatigue. Design procedure for welded hollow-section joints. Recommendations
"DD CLC/TS 45545-5:2009 DD CLC/TS 45545-5:2009. Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guide"
DD CEN/TS 45545-7:2009 DD CEN/TS 45545-7:2009. Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
DD CEN/TS 45545-3:2009 DD CEN/TS 45545-3:2009. Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers
DD CEN/TS 45545-1:2009 DD CEN/TS 45545-1:2009. Railway applications. Fire protection on railway vehicles. General
DD CEN/TS 45545-4:2009 DD CEN/TS 45545-4:2009. Railway applications. Fire protection on railway vehicles. Fire safety requirements for railway rolling stock design
BS EN ISO 19132:2008 BS EN ISO 19132:2008. Geographic information. Location based services. Reference model
BS EN 813:2008 BS EN 813:2008. Personal fall protection equipment. Sit harnesses
BS EN ISO 19134:2008 BS EN ISO 19134:2008. Geographic information. Location-based services. Multimodal routing and navigation
BS ISO 20765-1:2005 BS ISO 20765-1:2005. Natural gas. Calculation of thermodynamic properties. Gas phase properties for transmission and distribution applications
BS ISO 8423:2008 BS ISO 8423:2008. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
BS ISO 18589-6:2009 BS ISO 18589-6:2009. Measurement of radioactivity in the environment. Soil. Measurement of gross alpha and gross beta activities
BS ISO 18589-5:2009 BS ISO 18589-5:2009. Measurement of radioactivity in the environment. Soil. Measurement of strontium 90
BS ISO 18589-4:2009 BS ISO 18589-4:2009. Measurement of radioactivity in the environment. Soil. Measurement of plutonium isotopes (plutonium 238 and Plutonium 239 + 240) by alpha spectrometry
"BS ISO 21048:2004 BS ISO 21048:2004. Plastics. Epoxy resins. Determination of 1,2-glycol content"
"BS 5385-5:2009 BS 5385-5:2009. Wall and floor tiling. Design and installation of terazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice"
BS 5385-4:2009 BS 5385-4:2009. Wall and floor tiling. Design and installation of ceramic and mosaic tiling in special conditions. Code of practice
"BS EN 4532:2009 BS EN 4532:2009. Aerospace series. Cables, optical, single core 200 μm/280 μm fibre, 2,5 mm outer jacket. Technical specification"
DD CLC/TS 61496-2:2006 DD CLC/TS 61496-2:2006. Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs
BS ISO 20665:2008 BS ISO 20665:2008. Water quality. Determination of chronic toxicity to Ceriodaphnia dubia
ISO20666 : 2008 EDT1 ISO20666 : 2008 EDT1. Water quality - Determination of the chronic toxicity to Brachionus calyciflorus in 48 h
BS ISO 5834-3:2005 BS ISO 5834-3:2005. Implants for surgery. Ultra-high-molecular-weight polyethylene. Accelerated ageing methods
BS EN ISO 21531:2009 BS EN ISO 21531:2009. Dentistry. Graphical symbols for dental instruments
BS EN 15194:2009 BS EN 15194:2009. Cycles. Electrically power assisted cycles. EPAC bicycles
BS ISO 16055:2003 BS ISO 16055:2003. Tobacco and tobacco products. Monitor test piece. Requirements and use
BS ISO 5834-2:2006 BS ISO 5834-2:2006. Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
BS ISO 20160:2006 BS ISO 20160:2006. Implants for surgery. Metallic materials. Classification of microstructures for alpha+beta titanium alloy bars
BS ISO 18145:2003 BS ISO 18145:2003. Environmental tobacco smoke. Determination of vapour phase nicotine and 3-ethenylpyridine in air. Gas chromatographic method
BS ISO 18144:2003 BS ISO 18144:2003. Environmental tobacco smoke. Estimation of its contribution to respirable suspended particles. Method based on solanesol
BS EN 15355:2008 BS EN 15355:2008. Railway applications. Braking. Distributor valves and distributor-isolating devices
BS ISO 18280:2005 BS ISO 18280:2005. Plastics. Epoxy resins. Test methods
BS ISO 6780:2003 BS ISO 6780:2003. Flat pallets for intercontinental materials handling. Principal dimensions and tolerances
BS ISO 22742:2005 BS ISO 22742:2005. Packaging. Linear bar code and two-dimensional symbols for product packaging
08/30017005 DC 08/30017005 DC. BS EN ISO 10848-4. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms. Part 4. All other cases
"BS ISO 16872:2008 BS ISO 16872:2008. Short link chains for lifting purposes. Grade VH, fine tolerance for manually operated chain hoists"
BS EN 14033-1:2008 BS EN 14033-1:2008. Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for running
09/19984091 DC 09/19984091 DC. BS EN ISO 19906. Petroleum and natural gas industries. Arctic offshore structures
BS 8214:2008 BS 8214:2008. Code of practice for fire door assemblies
ISO15835-1 : 2009 EDTN1 ISO15835-1 : 2009 EDTN1. ISO15835 : 2009 Steels for the reinforcment of concrete - Reinforcement couplers for mechanical splices for bars . Part 1:Requirements
ISO15835-2 : 2009 EDTN1 ISO15835-2 : 2009 EDTN1. ISO15835 : 2009 Steels for the reinforcement of concrete - Reinforcement couplers for mechanical splices of bars . Part 2:Test methods
ISO16840-4 : 2009 ED1 ISO16840-4 : 2009 ED1. ISO16840-4 : 2009 Wheelchair seating. Part 4: Seating systems for use in motor vehicles
"TH 42043 TH 42043. Motor Vehicles and Equipment. An international guide to the application of EC, ECE and national approval schemes"
TH 20344 TH 20344. Boilers and Pressure Vessels. An international survey of design and approval requirements
TH 42056 TH 42056. CE Marking for Electromagnetic Compatibility. A guide to the EMC Directive
TH 42072 TH 42072. CE Marking for Personal Protective Equipment. A guide to the European Directive
TH 42075 TH 42075. The Low Voltage Directive. A guide to CE marking
TH 42073 TH 42073. CE Marking for Machinery. A guide to the European Directive
"BS EN 12044:2005 BS EN 12044:2005. Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements"
"BS EN 13476-1:2007 BS EN 13476-1:2007. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypro"
BS 6472-1:2008 BS 6472-1:2008. Guide to evaluation of human exposure to vibration in buildings. Vibration sources other than blasting
BS EN ISO 15883-4:2008 BS EN ISO 15883-4:2008. Washer-disinfectors. Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes
08/19974897 DC 08/19974897 DC. BS ISO 16269-4. Statistical interpretation of data. Part 4. Detection and treatment of outliers
08/19979365 DC 08/19979365 DC. BS ISO 15928-3. Houses. Description of performance. Part 3. Structural durability
ISO12574-2 : 2008 EDTN1 ISO12574-2 : 2008 EDTN1. ISO12574 : 2008 Thermal insulation - Cellulose-fibre loose fill for horizontal applications in ventilated roof spaces. Part 2:Principal responsibilitie
DD 14035:2007 DD 14035:2007. Fireworks. Selection packs. Specification
ISO10303-221 : 2007 (CDROM) ISO10303-221 : 2007 (CDROM). ISO10303-221 : 2007 Industrial automation systems and integration. Product data representation and exchange. Part 221. Application protocol. Fu
BS 8471:2007 BS 8471:2007. Guide to particle sizing methods
07/19990769 DC 07/19990769 DC. BS EN 2857-002. Aerospace series. Metallic materials. Tests for ferromagnetic materials. Non-destructive testing. Magnetic particle inspection. Part 2. Inspection requir
07/19990771 DC 07/19990771 DC. BS EN 2857-001. Aerospace series. Metallic materials. Test methods for ferromagnetic materials. Non- destructive testing. Magnetic particle inspection. Part 1. General r
ISO12580 : 2007 EDTN1 ISO12580 : 2007 EDTN1. ISO12580 : 2007 Timber structures - Glued laminated timber - Glue-line delamination
ISO12579 : 2007 EDTN1 ISO12579 : 2007 EDTN1. ISO12579 : 2007 Timber structures - Glued laminated timber - Method of test for shear strength of glue lines
ISO12578 : 2008 EDTN1 ISO12578 : 2008 EDTN1. ISO12578 : 2008 Timber structures. Glued laminated timber. Component performance and production requirements
PD ISO/TR 22514-4:2007 PD ISO/TR 22514-4:2007. Statistical methods in process management. Capability and performance. Process capability estimates and performance measures
BS ISO 8999:2001 BS ISO 8999:2001. Reciprocating internal combustion engines. Graphical symbols
"BS EN 4346:2007 BS EN 4346:2007. Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm"
"BS EN 4347:2007 BS EN 4347:2007. Aerospace series. Steel FE-PM1506 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm"
BS 8410:2007 BS 8410:2007. Code of practice for lightweight temporary cladding for weather protection and containment on construction works
"BS ISO 14127:2008 BS ISO 14127:2008. Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents"
BS EN 10253-2:2007 BS EN 10253-2:2007. Butt-welding pipe fittings. Non alloy and ferritic alloy steels with specific inspection requirements
"BS EN 3361:2007 BS EN 3361:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1070 MPa ≤ Rm ≤ 1"
"BS EN 3364:2007 BS EN 3364:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm"
"BS ISO 461-1:2003 BS ISO 461-1:2003. Aircraft. Connectors for ground electrical supplies. Design, performance and test requirements"
DD ISO/TS 22600-1:2006 DD ISO/TS 22600-1:2006. Health informatics. Privilege management and access control. Overview and policy management
TH 42097 TH 42097. The Construction Products Directive. A guide to the requirements and CE marking
BS ISO 16850:2007 BS ISO 16850:2007. Road vehicles. Pedestrian protection. Child head impact test method
BS EN 14392:2007 BS EN 14392:2007. Aluminium and aluminium alloys. Requirements for anodised products for use in contact with foodstuff
BS ISO 12500-1:2007 BS ISO 12500-1:2007. Filters for compressed air. Test methods. Oil aerosols
BS ISO 12500-2:2007 BS ISO 12500-2:2007. Filters for compressed air. Test methods. Oil vapours
DD ISO/TS 17924:2007 DD ISO/TS 17924:2007. Soil quality. Assessment of human exposure from ingestion of soil and soil material. Guidance on the application and selection of physiologically based extra
"BS EN 3745-411:2007 BS EN 3745-411:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Resistance to fluids"
"BS EN 4165-001:2007 BS EN 4165-001:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Technical specification"
"BS EN 4165-002:2007 BS EN 4165-002:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Specification of performance and contact arrangements"
"BS EN 4165-004:2007 BS EN 4165-004:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Stackable mounting receptacle 2 and 4 modules, series 2"
"BS EN 4165-005:2007 BS EN 4165-005:2007. Aerospace series. Connectors, electrical, rectangular, Modular. Operating temperatures 175 °C continuous. Stackable receptacle 2 and 4 modules, series 3. Produ"
"BS EN ISO 15012-2:2008 BS EN ISO 15012-2:2008. Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration. Determination of the minimum air vo"
"BS ISO 11078:2007 BS ISO 11078:2007. Aircraft. De-icing/anti-icing fluids. ISO type II, III and IV"
BS EN 13921:2007 BS EN 13921:2007. Personal protective equipment. Ergonomic principles
"BS EN 3745-203:2008 BS EN 3745-203:2008. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable dimensions"
"BS EN 3745-410:2007 BS EN 3745-410:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Thermal life"
"BS EN 3745-705:2007 BS EN 3745-705:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Contrast measurement"
"BS ISO 20280:2007 BS ISO 20280:2007. Soil quality. Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry"
BS ISO 6194-1:2007 BS ISO 6194-1:2007. Rotary shaft lip-type seals incorporating elastomeric sealing elements. Nominal dimensions and tolerances
BS ISO 6194-5:2008 BS ISO 6194-5:2008. Rotary-shaft lip-type seals incorporating elastomeric sealing elements. Identification of visual imperfections
BS EN 12952-11:2007 BS EN 12952-11:2007. Water-tube boilers and auxiliary installations. Requirements for limiting devices of the boiler and accessories
BS EN ISO 12215-6:2008 BS EN ISO 12215-6:2008. Small craft. Hull construction and scantlings. Structural arrangements and details
DD CEN/TS 15127-1:2005 DD CEN/TS 15127-1:2005. Health informatics. Testing of physiological measurement software. General
"BS ISO 16031-2:2003 BS ISO 16031-2:2003. Aerospace fluid systems. O-Rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes. Standard tolerances for non-hydra"
BS EN ISO 11611:2007 BS EN ISO 11611:2007. Protective clothing for use in welding and allied processes
"BS EN ISO 12215-5:2008 BS EN ISO 12215-5:2008. Small craft. Hull construction and scantlings. Design pressures for monohulls, design stresses, scantlings determination"
PD ISO/IEC TR 15443-3:2007 PD ISO/IEC TR 15443-3:2007. Information technology. Security techniques. A framework for IT security assurance. Analysis of assurance methods
BS EN 61730-1:2007 BS EN 61730-1:2007. Photovoltaic (PV) module safety qualification. Requirements for construction
BS EN 61730-2:2007 BS EN 61730-2:2007. Photovoltaic (PV) module safety qualification. Requirements for testing
BS EN ISO 22435:2007 BS EN ISO 22435:2007. Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
BS 5385-3:2007 BS 5385-3:2007. Wall and floor tiling. Design and installation of internal and external ceramic floor tiles and mosaics in normal conditions. Code of practice
"BS EN 3155-034:2007 BS EN 3155-034:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, male, type D, crimp, class R. Product standard"
BS ISO 8843:2005 BS ISO 8843:2005. Aircraft. Crimp-removable contacts for electrical connectors. Identification system
BS ISO 16938-1:2008 BS ISO 16938-1:2008. Building construction. Determination of the staining of porous substrates by sealants used in joints. Test with compression
BS ISO 16938-2:2008 BS ISO 16938-2:2008. Building construction. Determination of the staining of porous substrates by sealants used in joints. Test without compression
"BS EN 4604-004:2007 BS EN 4604-004:2007. Aerospace series. Cable, electrical, for signal transmission. Cable, microcoaxial, high immunity, 50 Ohms, 200°C, type WS. Product standard"
"BS EN 4604-007:2007 BS EN 4604-007:2007. Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial 50 Ohms, 200°C, type WN. Product standard"
BS ISO 18589-1:2005 BS ISO 18589-1:2005. Measurement of radioactivity in the environment. Soil. General guidelines and definitions
"BS ISO 18589-2:2007 BS ISO 18589-2:2007. Measurement of radioactivity in the environment. Soil. Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples"
BS ISO 18589-3:2007 BS ISO 18589-3:2007. Measurement of radioactivity in the environment. Soil. Measurement of gamma-emitting radionuclides
BS EN 1993-1-7:2007 BS EN 1993-1-7:2007. Eurocode 3. Design of steel structures. Plated structures subject to out of plane loading
BS EN 1993-6:2007 BS EN 1993-6:2007. Eurocode 3. Design of steel structures. Crane supporting structures
BS EN 1999-1-1:2007 BS EN 1999-1-1:2007. Eurocode 9. Design of aluminium structures. General structural rules
BS EN 1999-1-3:2007 BS EN 1999-1-3:2007. Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue
BS EN ISO 10286:2007 BS EN ISO 10286:2007. Gas cylinders. Terminology
BS ISO 7176-26:2007 BS ISO 7176-26:2007. Wheelchairs. Vocabulary
"BS EN 4165-006:2007 BS EN 4165-006:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Plug for 2 and 4 modules, series 2. Product standard"
"BS EN 4165-009:2007 BS EN 4165-009:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Rack and panel plug for 2 and 4 modules, series 3. Prod"
"BS EN 4165-023:2007 BS EN 4165-023:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Tooling for assembly receptacle coding component. Produ"
"BS EN 4165-008:2007 BS EN 4165-008:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Rack and panel plug for 2 and 4 modules, series 2. Prod"
"BS EN 4165-018:2007 BS EN 4165-018:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Protective cover for receptacle 2 or 4 modules, series"
"BS EN 4165-020:2007 BS EN 4165-020:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Coupling system keyway for receptacle. Product standard"
"BS EN 4165-007:2007 BS EN 4165-007:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Plug for 2 and 4 modules, series 3. Product standard"
"BS EN 4165-010:2007 BS EN 4165-010:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Rack and panel rear mounted plug for 2 and 4 modules, s"
"BS EN 4165-011:2007 BS EN 4165-011:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Flange mounting receptacle 2 and 4 modules, series 2. P"
"BS EN 4165-021:2007 BS EN 4165-021:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Coupling system keyway for plug. Product standard"
ISO/IEC14476-3 : 2008 EDTN1 ISO/IEC14476-3 : 2008 EDTN1. ISO/IEC14476-3 : 2008 Information technology. Enhanced communications transport protocol. Specification of duplex multicast transport
"BS EN 61249-4-1:2008 BS EN 61249-4-1:2008. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilay"
"DD IEC/TS 61836:2007 DD IEC/TS 61836:2007. Solar photovoltaic energy systems. Terms, definitions and symbols"
BS ISO 3724:2007 BS ISO 3724:2007. Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant
"BS EN 14931:2006 BS EN 14931:2006. Pressure vessels for human occupancy (PVHO). Multi-place pressure chambers for hyperbaric therapy. Performance, safety requirements and testing"
BS ISO 80000-3:2007 BS ISO 80000-3:2007. Quantities and units. Space and time
BS EN ISO 20743:2007 BS EN ISO 20743:2007. Textiles. Determination of antibacterial activity of antibacterial finished products
BS EN 13063-3:2007 BS EN 13063-3:2007. Chimneys. System chimneys with clay/ceramic flue liners. Requirements and test methods for air flue system chimneys
BS ISO 80000-4:2006 BS ISO 80000-4:2006. Quantities and units. Mechanics
BS EN 14492-1:2006 BS EN 14492-1:2006. Cranes. Power driven winches and hoists. Power driven winches
BS EN 14492-2:2006 BS EN 14492-2:2006. Cranes. Power driven winches and hoists. Power driven hoists
BS EN ISO 22674:2006 BS EN ISO 22674:2006. Dentistry. Metallic materials for fixed and removable restorations and appliances
BS EN 61753-1:2007 BS EN 61753-1:2007. Fibre optic interconnecting devices and passive components performance standard. General and guidance for performance standards
WD/ISO22794 : 2007 EDTN1 WD/ISO22794 : 2007 EDTN1. ISO22794 : 2007 Dentistry. Implantable materials for bone reconstruction in oral and maxillofacial surgery. Content of a technical file
BS EN 62282-3-1:2007 BS EN 62282-3-1:2007. Fuel cell technologies. Stationary fuel cell power systems. Safety
BS EN 378-3:2008 BS EN 378-3:2008. Refrigerating systems and heat pumps. Safety and environmental requirements. Installation site and personal protection
"BS EN 378-4:2008 BS EN 378-4:2008. Refrigerating systems and heat pumps. Safety and environmental requirements. Operation, maintenance, repair and recovery"
BS EN 62464-1:2007 BS EN 62464-1:2007. Magnetic resonance equipment for medical imaging. Determination of essential image quality parameters
BS EN 1497:2007 BS EN 1497:2007. Personal fall protection equipment. Rescue harnesses
BS EN 352-8:2008 BS EN 352-8:2008. Hearing protectors. Safety requirements and testing. Entertainment audio ear-muffs
"BS EN 62132-3:2007 BS EN 62132-3:2007. Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz. Bulk current injection (BCI) method"
BS IEC 62340:2007 BS IEC 62340:2007. Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF)
BS ISO 12789-2:2008 BS ISO 12789-2:2008. Reference radiation fields. Simulated workplace neutron fields. Calibration fundamentals related to the basic quantities
BS EN ISO 9185:2007 BS EN ISO 9185:2007. Protective clothing. Assessment of resistance of materials to molten metal splash
BS EN 60027-2:2007 BS EN 60027-2:2007. Letter symbols to be used in electrical technology. Telecommunications and electronics
BS EN 60027-4:2007 BS EN 60027-4:2007. Letter symbols to be used in electric technology. Rotating electric machines
"BS EN 3999:2007 BS EN 3999:2007. Aerospace series. Aluminium alloy AL-P2024-T351. Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm"
"BS EN 4002:2007 BS EN 4002:2007. Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm ≤ a ≤ 6 mm"
"BS EN 140101-806:2008 BS EN 140101-806:2008. Detail Specification: Fixed low power film resistors. Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads"
BS ISO 18695:2007 BS ISO 18695:2007. Textiles. Determination of resistance to water penetration. Impact penetration test
BS EN 14704-2:2007 BS EN 14704-2:2007. Determination of the elasticity of fabrics. Multiaxial tests
BS EN 14878:2007 BS EN 14878:2007. Textiles. Burning behaviour of childrens nightwear. Specification
BS ISO 13506:2008 BS ISO 13506:2008. Protective clothing against heat and flame. Test method for complete garments. Prediction of burn injury using an instrumented manikin
BS EN 60068-2-2:2007 BS EN 60068-2-2:2007. Environmental testing. Tests. Test B. Dry heat
BS EN ISO 10424-2:2007 BS EN ISO 10424-2:2007. Petroleum and natural gas industries. Rotary drilling equipment. Threading and gauging of rotary shouldered thread connections
BS EN 1051-2:2007 BS EN 1051-2:2007. Glass in building. Glass blocks and glass pavers. Evaluation of conformity/Product standard
DD CEN/TS 14421:2006 DD CEN/TS 14421:2006. Hose tail and ferrule for crimping and swaging
BS 5702-3:2008 BS 5702-3:2008. Guide to statistical process control (SPC) charts for variables. Charting techniques for short runs and small mixed batches
BS EN 60384-23:2005 BS EN 60384-23:2005. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitor
BS ISO 23181:2007 BS ISO 23181:2007. Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid
"BS EN 14637:2007 BS EN 14637:2007. Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance"
"BS EN 61189-3:2008 BS EN 61189-3:2008. Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for interconnection structures (printed b"
BS IEC 61892-2:2005 BS IEC 61892-2:2005. Mobile and fixed offshore units. Electrical installations. System design
BS EN 60454-2:2007 BS EN 60454-2:2007. Pressure-sensitive adhesive tapes for electrical purposes. Methods of test
BS ISO 24343-1:2007 BS ISO 24343-1:2007. Resilient and laminate floor coverings. Determination of indentation and residual indentation. Residual indentation
BS ISO 24344:2008 BS ISO 24344:2008. Resilient floor coverings. Determination of flexibility and deflection
BS EN 1367-1:2007 BS EN 1367-1:2007. Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing
"BS EN ISO 2692:2006 BS EN ISO 2692:2006. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity require"
BS EN 62311:2008 BS EN 62311:2008. Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
BS EN ISO 10931:2005 BS EN ISO 10931:2005. Plastics piping systems for industrial applications. Poly(vinylidene fluoride) (PVDF). Specifications for components and the system
BS EN 60745-2-21:2007 BS EN 60745-2-21:2007. Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners
"BS EN 61192-5:2007 BS EN 61192-5:2007. Workmanship requirements for soldered electric assemblies. Rework, modification and repair of soldered electronic assemblies"
BS EN 61753-092-6:2007 BS EN 61753-092-6:2007. Fibre optic interconnecting devices and passive components performance standard. Non-connectorized single-mode circulators for category O. Uncontrolled e
BS ISO/IEC 25030:2007 BS ISO/IEC 25030:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality requirements
BS ISO 9696:2007 BS ISO 9696:2007. Water quality. Measurement of gross alpha activity in non-saline water. Thick source method
BS 7394-2:2007 BS 7394-2:2007. Complete spectacles. Specification for prescription spectacles
ISO2137 : 2007 EDTN3 ISO2137 : 2007 EDTN3. ISO2137 : 2007 Petroleum products and lubricants. Determination of cone penetration of lubricating greases and petrolatum
BS EN 61340-5-1:2007 BS EN 61340-5-1:2007. Electrostatics. Protection of electronic devices from electrostatic phenomena. General requirements
BS ISO/IEC 15944-4:2007 BS ISO/IEC 15944-4:2007. Information technology. Business operational view. Business transaction scenarios. Accounting and economic ontology
"BS EN 13476-2:2007 BS EN 13476-2:2007. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypro"
08/30083041 DC 08/30083041 DC. BS ISO/IEC 20944-2. Information technology. Metadata Registry Interoperability and Bindings (MDR-IB). Part 2. Coding bindings
08/30083044 DC 08/30083044 DC. BS ISO/IEC 20944-3. Information technology. Metadata Registry Interoperability and Bindings (MDRIB). Part 3. API bindings
"08/30083153 DC 08/30083153 DC. BS ISO/IEC 20944-1. Information technology. Metadata Registries Interoperability and Bindings (MDR-IB). Part 1. Framework, common vocabulary, and common provisions for c"
BS EN 14944-3:2007 BS EN 14944-3:2007. Influence of cementitious products on water intended for human consumption. Test methods. Migration of substances from factory-made cementitious products
"BS 1363-5:2008 BS 1363-5:2008. 13 A plugs, socket-outlets, adaptors and connection units. Specification for fused conversion plugs"
BS EN 12967-1:2007 BS EN 12967-1:2007. Health informatics. Service architecture. Enterprise viewpoint
BS EN 13606-2:2007 BS EN 13606-2:2007. Health informatics. Electronic health record communication. Archetypes interchange specification
BS ISO 22538-1:2007 BS ISO 22538-1:2007. Space systems. Oxygen safety. Design of oxygen systems and components
BS ISO 22538-2:2007 BS ISO 22538-2:2007. Space systems. Oxygen safety. Selection of metallic materials for oxygen systems and components
08/30084134 DC 08/30084134 DC. BS ISO 22538-5. Space systems. Oxygen safety. Part 5. Operational and emergency procedures
BS ISO 11073-90101:2008 BS ISO 11073-90101:2008. Health informatics. Point-of-care medical device communication. Analytical instruments. Point-of-care test
BS ISO 17115:2007 BS ISO 17115:2007. Health informatics. Vocabulary for terminological systems
BS ISO 21930:2007 BS ISO 21930:2007. Sustainability in building construction. Environmental declaration of building products
BS ISO 15392:2008 BS ISO 15392:2008. Sustainability in building construction. General principles
BS ISO 15686-8:2008 BS ISO 15686-8:2008. Buildings and constructed assets. Service-life planning. Reference service life and service-life estimation
ISO3452-1 : 2008 EDTN1 ISO3452-1 : 2008 EDTN1. ISO3452-1 : 2008 Non-destructive testing. Penetrant testing. Part 1. General principles
"BS EN 14587-1:2007 BS EN 14587-1:2007. Railway applications. Track. Flash butt welding of rails. New R220, R260, R260Mn and R350HT grade rails in a fixed plant"
"BS EN ISO 21587-1:2007 BS EN ISO 21587-1:2007. Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method). Apparatus, reagents, dissolution and gravimetric"
"BS ISO 23893-1:2007 BS ISO 23893-1:2007. Water quality. Biochemical and physiological measurements on fish. Sampling of fish, handling and preservation of samples"
DD ISO/TS 23893-2:2007 DD ISO/TS 23893-2:2007. Water quality. Biochemical and physiological measurements on fish. Determination of ethoxyresorufin-O-deethylase (EROD)
"BS 6400-3:2007 BS 6400-3:2007. Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m3/h. Low and medium pressure (3rd family gases)"
BS 6100-3:2007 BS 6100-3:2007. Building and civil engineering. Vocabulary. Civil engineering. General
BS 6100-4:2008 BS 6100-4:2008. Building and civil engineering. Vocabulary. Transport
BS 6100-6:2008 BS 6100-6:2008. Building and civil engineering. Vocabulary. Construction parts
BS 6100-7:2008 BS 6100-7:2008. Building and civil engineering. Vocabulary. Services
BS 6100-8:2007 BS 6100-8:2007. Building and civil engineering. Vocabulary. Work with timber and wood-based panels
BS 6100-10:2007 BS 6100-10:2007. Building and civil engineering. Vocabulary. Contract terms
"BS 6100-11:2007 BS 6100-11:2007. Building and civil engineering. Vocabulary. Performance characteristics, measurement and joints"
"BS 8204-6:2008 BS 8204-6:2008. Screeds, bases and in situ floorings. Synthetic resin floorings. Code of practice"
BS EN 1744-5:2006 BS EN 1744-5:2006. Tests for chemical properties of aggregates. Determination of acid soluble chloride salts
BS EN 1744-6:2006 BS EN 1744-6:2006. Tests for chemical properties of aggregates. Determination of the influence of recycled aggregate extract on the initial setting time of cement
BS ISO 10651-5:2006 BS ISO 10651-5:2006. Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Gas-powered emergency resuscitators
BS EN 60534-8-4:2005 BS EN 60534-8-4:2005. Industrial-process control valves. Noise considerations. Prediction of noise generated by hydrodynamic flow
BS EN ISO 8185:2007 BS EN ISO 8185:2007. Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems
BS EN 61753-062-6:2008 BS EN 61753-062-6:2008. Fibre optic interconnecting devices and passive components performance standard. Non-connectorized single-mode fibre optic pigtailed isolators for catego
"BS EN ISO 283:2007 BS EN ISO 283:2007. Textile conveyor belts. Full thickness tensile strength, elongation at break and elongation at the reference load. Test method"
BS EN 62282-5-1:2007 BS EN 62282-5-1:2007. Fuel cell technologies. Portable fuel cell power systems. Safety
08/30089959 DC 08/30089959 DC. BS 3998. Recommendations for tree work
"BS EN 60445:2007 BS EN 60445:2007. Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals and conductor terminations"
"BS EN 60446:2007 BS EN 60446:2007. Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or alphanumerics"
BS EN 60745-2-5:2007 BS EN 60745-2-5:2007. Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws
BS EN 60730-2-10:2007 BS EN 60730-2-10:2007. Automatic electrical controls for household and similar use. Particular requirements for motor-starting relays
ISO13408-1 : 2008 EDTN2 ISO13408-1 : 2008 EDTN2. ISO13408-1 : 2008 Aseptic processing of health care products . Part 1. General requirements
BS ISO 7176-14:2008 BS ISO 7176-14:2008. Wheelchairs. Power and control systems for electrically powered wheelchairs and scooters. Requirements and test methods
"BS EN 179:2008 BS EN 179:2008. Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods"
"BS EN 1125:2008 BS EN 1125:2008. Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods"
BS ISO 13628-11:2007 BS ISO 13628-11:2007. Petroleum and natural gas industries. Design and operation of subsea production systems. Flexible pipe systems for subsea and marine applications
BS EN ISO 7233:2008 BS EN ISO 7233:2008. Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
BS EN ISO 11970:2007 BS EN ISO 11970:2007. Specification and approval of welding procedures for production welding of steel castings
"08/30092426 DC 08/30092426 DC. BS ISO 12162. Thermoplastics materials for pipes and fittings for pressure applications. Classification, designation coefficient, and designation"
BS EN 131-3:2007 BS EN 131-3:2007. Ladders. User instructions
BS EN 50444:2008 BS EN 50444:2008. Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes
BS ISO 23269-1:2008 BS ISO 23269-1:2008. Ships and marine technology. Breathing apparatus for ships. Emergency escape breathing devices (EEBD) for shipboard use
DD ISO/TS 14934-4:2007 DD ISO/TS 14934-4:2007. Fire tests. Calibration of heat flux meters. Guidance on the use of heat flux meters in fire tests
"08/30093077 DC 08/30093077 DC. BS EN 15269-10. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements o"
BS EN 12798:2007 BS EN 12798:2007. Transport quality management system. Road rail and inland navigation transport. Quality management system requirements to supplement EN ISO 9001 for the transport of
BS EN ISO 9241-151:2008 BS EN ISO 9241-151:2008. Ergonomics of human-system interaction. Guidance on World Wide Web user interfaces
BS EN ISO 252:2007 BS EN ISO 252:2007. Conveyor belts. Adhesion between constitutive elements. Test methods
BS EN ISO 583:2007 BS EN ISO 583:2007. Conveyor belts with a textile carcass. Total belt thickness and thickness of constitutive elements. Test methods
DD 8723-5:2008 DD 8723-5:2008. Structured vocabularies for information retrieval. Guide. Exchange formats and protocols for interoperability
BS EN 14688:2006 BS EN 14688:2006. Sanitary appliances. Wash basins. Functional requirements and test methods
BS ISO 7183:2007 BS ISO 7183:2007. Compressed-air dryers. Specifications and testing
BS ISO 12006-3:2007 BS ISO 12006-3:2007. Building construction. Organization of information about construction works. Framework for object-oriented information
"BS EN ISO 216:2007 BS EN ISO 216:2007. Writing paper and certain classes of printed matter. Trimmed sizes. A and B series, and indication of machine direction"
08/30094862 DC 08/30094862 DC. BS EN ISO 11201. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions in
08/30094866 DC 08/30094866 DC. BS ISO 11202. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions apply
08/30094874 DC 08/30094874 DC. EN ISO 11204. Acoustics. Noise emitted by machinery and equipment. Measu rement of emission sound pressure levels at a work station and at other specified positions appl
"BS ISO 17751:2007 BS ISO 17751:2007. Textiles. Quantitative analysis of animal fibres by microscopy. Cashmere, wool, speciality fibres and their blends"
BS ISO 10190:2008 BS ISO 10190:2008. Motor cycle chains. Characteristics and test methods
BS ISO 5489:2008 BS ISO 5489:2008. Ships and marine technology. Embarkation ladders
BS EN 443:2008 BS EN 443:2008. Helmets for fire fighting in buildings and other structures
BS EN 1077:2007 BS EN 1077:2007. Helmets for alpine skiers and snowboarders
DD ISO/TS 19708:2007 DD ISO/TS 19708:2007. Geosynthetics. Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method
BS EN 14845-1:2007 BS EN 14845-1:2007. Test methods for fibres in concrete. Reference concretes
BS EN 62314:2006 BS EN 62314:2006. Solid-state relays
BS ISO 13404:2007 BS ISO 13404:2007. Prosthetics and orthotics. Categorization and description of external orthoses and orthotic components
DD IEC/TS 60519-5:2008 DD IEC/TS 60519-5:2008. Safety in electroheat installations. Specifications for safety in plasma installations
08/30096501 DC 08/30096501 DC. BS ISO 12111. Metallic materials. Fatigue testing. Strain-controlled thermomechanical fatigue testing method
BS EN 1486:2007 BS EN 1486:2007. Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting
"BS ISO 2490:2007 BS ISO 2490:2007. Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module. Nominal dimensions"
"BS 5871-4:2007 BS 5871-4:2007. Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Independent gas-fired fl"
"BS EN 934-5:2007 BS EN 934-5:2007. Admixtures for concrete, mortar and grout. Admixtures for sprayed concrete. Definitions, requirements, conformity, marking and labelling"
"BS EN 3746:2007 BS EN 3746:2007. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Hardness 80 IRHD"
"BS EN 3747:2007 BS EN 3747:2007. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification"
BS EN 15343:2007 BS EN 15343:2007. Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content
BS EN 15344:2007 BS EN 15344:2007. Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates
BS EN 15345:2007 BS EN 15345:2007. Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates
BS EN 15346:2007 BS EN 15346:2007. Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
BS EN 15348:2007 BS EN 15348:2007. Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates
BS EN 15342:2007 BS EN 15342:2007. Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
BS EN 15347:2007 BS EN 15347:2007. Plastics. Recycled Plastics. Characterization of plastics waste
BS ISO 23714:2007 BS ISO 23714:2007. Pulps. Determination of water retention value (WRV)
BS EN 60730-2-11:2008 BS EN 60730-2-11:2008. Automatic electrical controls for household and similar use. Particular requirements for energy regulators
BS ISO 13344:2004 BS ISO 13344:2004. Estimation of the lethal toxic potency of fire effluents
BS ISO 16232-5:2007 BS ISO 16232-5:2007. Road vehicles. Cleanliness of components of fluid circuits. Method of extraction of contaminants on functional test bench
BS ISO 14999-4:2007 BS ISO 14999-4:2007. Optics and photonics. Interferometric measurement of optical elements and optical systems. Interpretation and evaluation of tolerances specified in ISO 10110
BS ISO 16232-8:2007 BS ISO 16232-8:2007. Road vehicles. Cleanliness of components of fluid circuits. Particle nature determination by microscopic analysis
BS ISO 16232-10:2007 BS ISO 16232-10:2007. Road vehicles. Cleanliness of components of fluid circuits. Expression of results
BS ISO 21018-1:2008 BS ISO 21018-1:2008. Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid. General principles
BS ISO 21018-3:2008 BS ISO 21018-3:2008. Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid. Use of the filter blockage technique
"BS EN 14566:2008 BS EN 14566:2008. Mechanical fasteners for gypsum plasterboard systems. Definitions, requirements and test methods"
"BS EN 13434:2006 BS EN 13434:2006. Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B"
"BS EN 13433:2007 BS EN 13433:2007. Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A"
PD ISO/TR 22335:2007 PD ISO/TR 22335:2007. Surface chemical analysis. Depth profiling. Measurement of sputtering rate. Mesh-replica method using a mechanical stylus profilometer
"BS EN 131-1:2007 BS EN 131-1:2007. Ladders. Terms, types, functional sizes"
BS EN 131-4:2007 BS EN 131-4:2007. Ladders. Single or multiple hinge-joint ladders
BS ISO 3828:2008 BS ISO 3828:2008. Shipbuilding and marine structures. Deck machinery. Vocabulary and symbols
BS ISO 1704:2008 BS ISO 1704:2008. Ships and marine technology. Stud-link anchor chains
BS EN 14389-1:2007 BS EN 14389-1:2007. Road traffic noise reducing devices. Procedures for assessing long term performance. Acoustical characteristics
"BS EN 60745-2-3:2007 BS EN 60745-2-3:2007. Hand-held motor-operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders"
"BS ISO 17812:2007 BS ISO 17812:2007. Paper, board and pulps. Determination of total magnesium, total calcium, total manganese, total iron and total copper"
DD ISO/TS 16976-1:2007 DD ISO/TS 16976-1:2007. Respiratory protective devices. Human factors. Metabolic rates and respiratory flow rates
BS EN ISO 6520-1:2007 BS EN ISO 6520-1:2007. Welding and allied processes. Classification of geometric imperfections in metallic materials. Fusion welding
08/30099661 DC 08/30099661 DC. BS ISO 16900-2. Respiratory protective devices. Methods of test and test equipment. Part 2. Determination of breathing resistance
"BS EN 62388:2008 BS EN 62388:2008. Maritime navigation and radiocommunication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results"
BS ISO 5350-3:2007 BS ISO 5350-3:2007. Pulps. Estimation of dirt and shives. Visual inspection by reflected light using equivalent black area (EBA) method
BS EN 14500:2008 BS EN 14500:2008. Blinds and shutters. Thermal and visual comfort. Test and calculation methods
DD CEN/TS 14754-1:2007 DD CEN/TS 14754-1:2007. Curing compounds. Test methods. Determination of water retention efficiency of common curing compounds
BS ISO/IEC 25020:2007 BS ISO/IEC 25020:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Measurement reference model and guide
PD ISO/IEC TR 25021:2007 PD ISO/IEC TR 25021:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality measure elements
BS ISO/IEC 14143-1:2007 BS ISO/IEC 14143-1:2007. Information technology. Software measurement. Functional size measurement. Definition of concepts
BS EN 61025:2007 BS EN 61025:2007. Fault tree analysis (FTA)
BS EN 61124:2006 BS EN 61124:2006. Reliability testing. Compliance tests for constant failure rate and constant failure intensity
BS EN 61163-1:2006 BS EN 61163-1:2006. Reliability stress screening. Repairable assemblies manufactured in lots
BS EN 61165:2006 BS EN 61165:2006. Application of Markov techniques
BS ISO 3977-3:2004 BS ISO 3977-3:2004. Gas turbines. Procurement. Design requirements
BS ISO 15686-5:2008 BS ISO 15686-5:2008. Buildings and constructed assets. Service life planning. Life cycle costing
BS EN 570:2007 BS EN 570:2007. Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification
BS EN 363:2008 BS EN 363:2008. Personal fall protection equipment. Personal fall protection systems
BS IEC 62385:2007 BS IEC 62385:2007. Nuclear power plants. Instrumentation and control important to safety. Methods for assessing the performance of safety system instrument channels
"BS EN 13035-1:2008 BS EN 13035-1:2008. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Storage, handling and transportation equipment inside the f"
BS ISO 8791-4:2007 BS ISO 8791-4:2007. Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method
BS EN ISO 19493:2007 BS EN ISO 19493:2007. Water quality. Guidance on marine biological surveys of hard-substrate communities
"08/30102884 DC 08/30102884 DC. BS ISO 16972. Respiratory protective devices. Terms, definitions, graphical symbols and units of measurement"
BS EN ISO 20776-2:2007 BS EN ISO 20776-2:2007. Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrob
08/30103108 DC 08/30103108 DC. BS ISO 13474. Acoustics. Framework for calculating a distribution of sound exposure levels of impulsive sound events for purposes of environmental noise assessment
BS ISO 18512:2007 BS ISO 18512:2007. Soil quality. Guidance on long and short term storage of soil samples
BS ISO 17616:2008 BS ISO 17616:2008. Soil quality. Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials
BS ISO 18772:2008 BS ISO 18772:2008. Soil quality. Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials
BS EN 61995-1:2008 BS EN 61995-1:2008. Devices for the connection of luminaires for household and similar purposes. General requirements
BS ISO 3297:2007 BS ISO 3297:2007. Information and documentation. International standard serial number (ISSN)
BS EN 14829:2007 BS EN 14829:2007. Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
"BS ISO 2469:2007 BS ISO 2469:2007. Paper, board and pulps. Measurement of diffuse radiance factor"
BS ISO 22891:2007 BS ISO 22891:2007. Paper. Determination of transmittance by diffuse reflectance measurement
08/30103869 DC 08/30103869 DC. BS ISO 2146. Information and documentation. Registry services for libraries and related organizations
BS ISO 1003:2008 BS ISO 1003:2008. Spices. Ginger (Zingiber officinale Roscoe). Specification
BS EN ISO 16266:2008 BS EN ISO 16266:2008. Water quality. Detection and enumeration of Pseudomonas aeruginosa. Method by membrane filtration
BS ISO 10001:2007 BS ISO 10001:2007. Quality management. Customer satisfaction. Guidelines for codes of conduct for organizations
BS EN 13445-8:2006 BS EN 13445-8:2006. Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys
BS EN 60730-2-13:2008 BS EN 60730-2-13:2008. Automatic electrical controls for household and similar use. Particular requirements for humidity sensing controls
BS EN 62347:2007 BS EN 62347:2007. Guidance on system dependability specifications
BS EN 351-1:2007 BS EN 351-1:2007. Durability of wood and wood-based products. Preservative-treated solid wood. Classification of preservative penetration and retention
BS ISO 3166-2:2007 BS ISO 3166-2:2007. Codes for the representation of names of countries and their subdivisions. Country subdivision code
"PD CISPR/TR 16-4-4:2007 PD CISPR/TR 16-4-4:2007. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modeling. Statistics of complaint"