Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/portal/index.asp?typeid=1

http://www.findstandards.info/portal/index.asp?typeid=2

http://www.findstandards.info/portal/index.asp?typeid=3

http://www.findstandards.info/portal/index.asp?typeid=4

http://www.findstandards.info/portal/index.asp?typeid=5

08/30161535 DC 08/30161535 DC. BS EN ISO 1874-1. Plastics. Polyamide (PA) moulding and extrusion materials. Part 1. Designation
BS ISO 26322-1:2008 BS ISO 26322-1:2008. Tractors for agriculture and forestry. Safety. Standard tractors
BS ISO 22634:2008 BS ISO 22634:2008. Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke. Method using gas chromatography/mass spectrometry
"09/30161344 DC 09/30161344 DC. BS ISO 18164 AMD1. Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistance"
BS EN 15644:2008 BS EN 15644:2008. Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements
"BS EN 15620:2008 BS EN 15620:2008. Steel static storage systems. Adjustable pallet racking. Tolerances, deformations and clearances"
BS EN 50085-2-2:2008 BS EN 50085-2-2:2008. Cable trunking systems and cable ducting systems for electrical installations. Particular requirements for cable trunking systems and cable ducting systems i
"BS EN 60297-3-105:2009 BS EN 60297-3-105:2009. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series. Dimensions and design aspects for 1U"
08/30161152 DC 08/30161152 DC. BS EN 13634. Protective footwear for motorcycle riders. Requirements and test methods
BS 7592:2008 BS 7592:2008. Sampling for Legionella bacteria in water systems. Code of practice
BS ISO 22663:2007 BS ISO 22663:2007. Space data and information transfer systems. Proximity-1 space link protocol. Data link layer
BS ISO 21460:2007 BS ISO 21460:2007. Space data and information transfer systems. Proximity-1 space link protocol. Physical layer
BS EN ISO 14310:2008 BS EN ISO 14310:2008. Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs
BS EN 14890-2:2008 BS EN 14890-2:2008. Application interface for smart cards used as secure signature creation devices. Additional services
BS EN 14890-1:2008 BS EN 14890-1:2008. Application interface for smart cards used as secure signature creation devices. Basic services
BS ISO 22303:2008 BS ISO 22303:2008. Tobacco. Determination of tobacco specific nitrosamines. Method using buffer extraction
BS EN 62431:2008 BS EN 62431:2008. Reflectivity of electromagnetic wave absorbers in millimetre wave frequency. Measurement methods
"BS EN 62491:2008 BS EN 62491:2008. Industrial systems, installations and equipment and industrial products. Labelling of cables and cores"
BS EN 15626:2009 BS EN 15626:2009. Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method
BS EN 1332-3:2008 BS EN 1332-3:2008. Identification card systems. Man-machine interface. Keypads
BS EN 15637:2008 BS EN 15637:2008. Foods of plant origin. Determination of pesticide residues using LC-MS/MS following methanol extraction and clean-up using diatomaceous earth
BS EN 15634-1:2009 BS EN 15634-1:2009. Foodstuffs. Detection of food allergens by molecular biological methods. General considerations
BS EN 15633-1:2009 BS EN 15633-1:2009. Foodstuffs. Detection of food allergens by immunological methods. General considerations
BS EN 15632-4:2009 BS EN 15632-4:2009. District heating pipes. Pre-insulated flexible pipe systems. Bonded system with metal service pipes; requirements and test methods
"BS EN 15632-1:2009 BS EN 15632-1:2009. District heating pipes. Pre-insulated flexible pipe systems. Classification, general requirements and test methods"
BS EN 13757-6:2008 BS EN 13757-6:2008. Communication systems for meters and remote reading of meters. Local Bus
BS EN 13463-1:2009 BS EN 13463-1:2009. Non-electrical equipment for use in potentially explosive atmospheres. Basic method and requirements
BS EN 12393-2:2008 BS EN 12393-2:2008. Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Methods for extraction and clean-up
BS EN 12393-1:2008 BS EN 12393-1:2008. Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. General considerations
ISO589 : 2008 EDTN4 ISO589 : 2008 EDTN4. ISO589 : 2008 Hard coal - Determination of total moisture
BS 5444:2008 BS 5444:2008. Physical attributes of documents for microfilming or scanning. Code of practice
DD IEC/TS 62239:2008 DD IEC/TS 62239:2008. Process management for avionics. Preparation of an electronic components management plan
"BS ISO 14717:2008 BS ISO 14717:2008. Oil of origanum, Spanish type [Coridothymus capitatus (L.) Rchb.f.]"
BS ISO/IEC 12207:2008 BS ISO/IEC 12207:2008. Systems and software engineering. Software life cycle processes
BS EN 15625:2008 BS EN 15625:2008. Railway applications. Braking. Automatic variable load sensing devices
BS EN 15624:2008 BS EN 15624:2008. Railway applications. Braking. Empty-loaded changeover devices
BS ISO 15971:2008 BS ISO 15971:2008. Natural gas. Measurement of properties. Calorific value and Wobbe index
BS EN 50504:2008 BS EN 50504:2008. Validation of arc welding equipment
"BS ISO 15970:2008 BS ISO 15970:2008. Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor"
09/30159969 DC 09/30159969 DC. BS EN 408. Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
08/30159962 DC 08/30159962 DC. BS EN 384. Structural timber. Determination of characteristic values of mechanical properties and density
"BS EN ISO 13680:2008 BS EN ISO 13680:2008. Petroleum and natural gas industries. Corrosion- resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions"
"BS EN 61557-11:2009 BS EN 61557-11:2009. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures."
BS EN 50508:2009 BS EN 50508:2009. Multi-purpose insulating sticks for electrical operations on high voltage installations
BS ISO 12776:2008 BS ISO 12776:2008. Pallets. Slip sheets
"BS EN ISO 21068-3:2008 BS EN ISO 21068-3:2008. Chemical analysis of silicon-carbide-containing raw materials and refractory products. Determination of nitrogen, oxygen and metallic and oxidic constitu"
"BS EN ISO 21068-2:2008 BS EN ISO 21068-2:2008. Chemical analysis of silicon-carbide-containing raw materials and refractory products. Determination of loss on ignition, total carbon, free carbon and s"
BS EN ISO 21068-1:2008 BS EN ISO 21068-1:2008. Chemical analysis of silicon-carbide-containing raw materials and refractory products. General information and sample preparation
"BS 7533-13:2009 BS 7533-13:2009. Pavements constructed with clay, natural stone or concrete pavers. Guide for the design of permeable pavements constructed with concrete paving blocks and flags, natur"
BS EN 583-6:2008 BS EN 583-6:2008. Non-destructive testing. Ultrasonic examination. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
08/30159225 DC 08/30159225 DC. BS ISO 11452-9. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Part 9. Portable transmitters
BS EN 15608:2008 BS EN 15608:2008. Surface active agents. Quantitative determination of free fatty acid in alkylamidopropylbetaines. Gas- chromatographic method
BS EN 1409:2008 BS EN 1409:2008. Chemicals used for water treatment intended for human consumption. Polyamines
BS EN 900:2007 BS EN 900:2007. Chemicals used for treatment of water intended for human consumption. Calcium hypochlorite
BS EN 14317-2:2007 BS EN 14317-2:2007. Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Specification for the installed products
BS EN 15514:2007 BS EN 15514:2007. Chemicals used for treatment of swimming pool water. Hydrochloric acid
BS EN 15513:2007 BS EN 15513:2007. Chemicals used for treatment of swimming pool water. Carbon dioxide
BS EN 1124-3:2008 BS EN 1124-3:2008. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. System X. Dimensions
BS EN 13648-1:2008 BS EN 13648-1:2008. Cryogenic vessels. Safety devices for protection against excessive pressure. Safety valves for cryogenic service
BS EN 1626:2008 BS EN 1626:2008. Cryogenic vessels. Valves for cryogenic service
BS EN 15598:2008 BS EN 15598:2008. Textiles. Terry fabrics. Test method for the determination of the resistance to pile loop extraction
BS EN 15612:2008 BS EN 15612:2008. Railway applications. Braking. Brake pipe accelerator valve
BS EN 15611:2008 BS EN 15611:2008. Railway applications. Braking. Relay valves
BS EN 12518:2008 BS EN 12518:2008. Chemicals used for treatment of water intended for human consumption. High-calcium lime
BS EN 1017:2008 BS EN 1017:2008. Chemicals used for treatment of water intended for human consumption. Half-burnt dolomite
BS EN 1011-1:2009 BS EN 1011-1:2009. Welding. Recommendations for welding of metallic materials. General guidance for arc welding
DD CEN ISO/TS 15530-3:2007 DD CEN ISO/TS 15530-3:2007. Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Use of c
DD CEN ISO/TS 12781-1:2007 DD CEN ISO/TS 12781-1:2007. Geometrical product specifications (GPS). Flatness. Vocabulary and parameters of flatness
DD CEN ISO/TS 12780-1:2007 DD CEN ISO/TS 12780-1:2007. Geometrical product specifications (GPS). Straightness. Vocabulary and parameters of straightness
DD CEN ISO/TS 12181-2:2007 DD CEN ISO/TS 12181-2:2007. Geometrical product specifications (GPS). Roundness. Specification operators
BS EN 15619:2008 BS EN 15619:2008. Rubber or plastic coated fabrics. Safety of temporary Structures (tents). Specification for coated fabrics intended for tents and related structures
BS EN 1474-2:2008 BS EN 1474-2:2008. Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems. Design and testing of transfer hoses
BS EN 15613:2008 BS EN 15613:2008. Knee and elbow protectors for indoor sports. Safety requirements and test methods
BS EN 12821:2009 BS EN 12821:2009. Foodstuffs. Determination of vitamin D by high performance liquid chromatography. Measurement of cholecalciferol (D3) or ergocalciferol (D2)
BS ISO 17572-3:2008 BS ISO 17572-3:2008. Intelligent transport systems ITS). Location referencing for geographic databases. Dynamic location references (dynamic profile)
BS ISO 17572-2:2008 BS ISO 17572-2:2008. Intelligent transport systems (ITS). Location referencing for geographic databases. Pre-coded location references (pre-coded profile)
BS ISO 17572-1:2008 BS ISO 17572-1:2008. Intelligent transport systems (ITS). Location referencing for geographic databases. General requirements and conceptual model
"BS 9999:2008 BS 9999:2008. Code of practice for fire safety in the design, management and use of buildings"
BS EN 15267-2:2009 BS EN 15267-2:2009. Air quality. Certification of automated measuring systems. Initial assessment of the AMS manufacturers quality management system and post certification surveill
BS EN 15267-1:2009 BS EN 15267-1:2009. Air quality. Certification of automated measuring systems. General principles
BS ISO 22666:2007 BS ISO 22666:2007. Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol
"BS 6222-2:2009 BS 6222-2:2009. Domestic kitchen equipment. Fitted kitchen units, peninsular units, island units and breakfast bars. Performance requirements and test methods"
BS EN 62040-1:2008 BS EN 62040-1:2008. Uninterruptible power systems (UPS). General and safety requirements for UPS
BS EN 61300-2-15:2008 BS EN 61300-2-15:2008. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Torque strength of coupling mechanism
BS EN 62227:2008 BS EN 62227:2008. Multimedia home server systems. Digital rights permission code
BS EN ISO 105-E04:2009 BS EN ISO 105-E04:2009. Textiles. Tests for colour fastness. Colour fastness to perspiration
BS EN ISO 7590:2009 BS EN ISO 7590:2009. Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness
BS EN ISO 2870:2009 BS EN ISO 2870:2009. Surface active agents. Detergents. Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
BS EN 80601-2-58:2009 BS EN 80601-2-58:2009. Medical electrical equipment. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for oph
BS EN 50496:2008 BS EN 50496:2008. Determination of workers exposure to electromagnetic fields and assessment of risk at a broadcast site
"08/30157876 DC 08/30157876 DC. BS IEC 61526. Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct readin"
BS ISO 9211-3:2008 BS ISO 9211-3:2008. Optics and photonics. Optical coatings. Environmental durability
BS EN 13083:2008 BS EN 13083:2008. Tanks for transport of dangerous goods. Service equipment for tanks. Adaptor for bottom loading and unloading
BS EN 61039:2008 BS EN 61039:2008. Classification of insulating liquids
BS EN ISO 10058-3:2008 BS EN ISO 10058-3:2008. Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Flame atomic absorption spectrophotometry
BS EN ISO 10058-2:2008 BS EN ISO 10058-2:2008. Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Wet chemical analysis
"BS EN ISO 10058-1:2008 BS EN ISO 10058-1:2008. Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Apparatus, reagents, dissolution and dete"
BS ISO 11783-12:2009 BS ISO 11783-12:2009. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Diagnostics services
BS EN ISO 20565-3:2008 BS EN ISO 20565-3:2008. Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Flame atomic abs
BS EN ISO 20565-2:2008 BS EN ISO 20565-2:2008. Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Wet chemical ana
"BS EN ISO 20565-1:2008 BS EN ISO 20565-1:2008. Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Apparatus, reage"
PD CEN/TR 15367-1:2007 PD CEN/TR 15367-1:2007. Petroleum products. Guide for good housekeeping. Automotive diesel fuels
BS 8206-2:2008 BS 8206-2:2008. Lighting for buildings. Code of practice for daylighting
BS EN 50499:2008 BS EN 50499:2008. Procedure for the assessment of the exposure of workers to electromagnetic fields
BS EN 61290-10-2:2008 BS EN 61290-10-2:2008. Optical amplifiers. Test methods. Multichannel parameters. Pulse method using a gated optical spectrum analyzer
BS ISO 5675:2008 BS ISO 5675:2008. Agricultural tractors and machinery. General purpose quick-action hydraulic couplers
08/30156922 DC 08/30156922 DC. BS EN 15220-2. Railway applications. Brake indicators. Part 2. Electrical operation brake indicators
"BS EN 14587-2:2009 BS EN 14587-2:2009. Railway applications. Track. Flash butt welding of rails. New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed pl"
BS EN 15594:2009 BS EN 15594:2009. Railway applications. Track. Restoration of rails by electric arc welding
BS EN 15629:2008 BS EN 15629:2008. Steel static storage systems. Specification of storage equipment
09/30156692 DC 09/30156692 DC. BS EN 10029. Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
BS EN 15573:2008 BS EN 15573:2008. Earth-moving machinery. Design requirements for circulation on the road
BS EN 62494-1:2008 BS EN 62494-1:2008. Medical electrical equipment. Exposure index of digital X-ray imaging systems. Definitions and requirements for general radiography
BS 4592-6:2008 BS 4592-6:2008. Industrial type flooring and stair treads. Glass reinforced plastics (GRP) moulded open mesh gratings and protective barriers. Specification
BS EN 60286-2:2009 BS EN 60286-2:2009. Packaging of components for automatic handling. Packaging of components with unidirectional leads on continuous tapes
BS EN 15570:2008 BS EN 15570:2008. Hardware for furniture. Strength anddurability of hinges and their components. Hinges pivoting on a vertical axis
BS EN 15585:2008 BS EN 15585:2008. Cereals and cereal products. Durum wheat (T. durum Desf.). Determination of percentage of mitadine grains and calculation of percentage of vitreous grains
"BS EN 15587:2008 BS EN 15587:2008. Cereals and cereal products. Determination of Besatz in wheat (Triticuma estivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Ho"
08/30156330 DC 08/30156330 DC. BS ISO 21072-3. Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. Part 3. High viscosity oil
BS EN 13120:2009 BS EN 13120:2009. Internal blinds. Performance requirements including safety
BS ISO 8820-1:2008 BS ISO 8820-1:2008. Road vehicles. Fuse-links. Definitions and general test requirements
PD CLC/TR 50378-2-1:2009 PD CLC/TR 50378-2-1:2009. Passive components to be used in optical fibre communication systems. Product specifications. SC(SC2)-PC connector-type fixed optical attenuators usi
BS EN 62420:2008 BS EN 62420:2008. Concentric lay stranded overhead electrical conductors containing one or more gap(s)
"BS EN 3745-514:2009 BS EN 3745-514:2009. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable twist bend"
BS EN 15564:2008 BS EN 15564:2008. Precast concrete products. Resin bound concrete. Requirements and test methods
BS EN 1170-8:2008 BS EN 1170-8:2008. Test method for glass-fibre reinforced cement. Cyclic weathering type test
BS EN ISO 3861:2008 BS EN ISO 3861:2008. Rubber hoses for sand and grit blasting. Specification
"BS EN ISO 2398:2008 BS EN ISO 2398:2008. Rubber hoses, textile-reinforced for compressed air. Specification"
BS EN 13261:2009 BS EN 13261:2009. Railway applications. Wheelsets and bogies. Axles. Product requirements
BS EN 15566:2009 BS EN 15566:2009. Railway applications. Railway rolling stock. Draw gear and screw coupling
BS ISO 18938:2008 BS ISO 18938:2008. Imaging materials. Optical discs. Care and handling for extended storage
09/30155521 DC 09/30155521 DC. BS EN 60601-1-11. Medical electrical equipment. Part 1-11. General requirements for basic safety and essential performance. Collateral standard. Requirements for medical
BS EN ISO 11064-5:2008 BS EN ISO 11064-5:2008. Ergonomic design of control centres. Displays and controls
BS ISO 27996:2009 BS ISO 27996:2009. Aerospace fluid systems. Elastomer seals. Storage and shelf life
BS ISO 15633:2009 BS ISO 15633:2009. Iron ores. Determination of nickel. Flame atomic absorption spectrometric method
BS ISO 2597-2:2008 BS ISO 2597-2:2008. Iron ores. Determination of total iron content. Titrimetric methods after titanium(III) chloride reduction
08/30155232 DC 08/30155232 DC. BS ISO 22915-5. Industrial trucks. Verification of stability. Part 5. Single side loading trucks
"BS EN 3475-811:2009 BS EN 3475-811:2009. Aerospace series. Cables, electrical, aircraft use. Test methods. Unbalance attenuation"
BS EN 61754-7:2008 BS EN 61754-7:2008. Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type MPO connector family
BS EN 60204-32:2008 BS EN 60204-32:2008. Safety of machinery. Electrical equipment of machines. Requirements for hoisting machines
ISO7165 : 2009 EDTN2 ISO7165 : 2009 EDTN2. Fire fighting - Portable fire extinguishers - Performance and construction
BS EN ISO 14172:2008 BS EN ISO 14172:2008. Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification
BS ISO 4254-9:2008 BS ISO 4254-9:2008. Agricultural machinery. Safety. Seed drills
09/30154810 DC 09/30154810 DC. BS EN ISO 28781. Petroleum and natural gas industries. Drilling and production equipment. Subsurface valves and related equipment
08/30154716 DC 08/30154716 DC. BS 5268-6.2 AMD1. Structural use of timber. Part 6-2. Code of practice for timber frame walls. Buildings other than dwellings not exceeding 4 storeys
BS 8493:2008 BS 8493:2008. Light reflectance value (LRV) of a surface. Method of test
BS ISO 24033:2009 BS ISO 24033:2009. Polyethylene of raised temperature resistance (PE-RT) pipes. Effect of time and temperature on the expected strength
BS EN 15551:2009 BS EN 15551:2009. Railway applications. Railway rolling stock. Buffers
BS EN 13141-10:2008 BS EN 13141-10:2008. Ventilation for buildings. Performance testing of components/products for residential ventilation. Humidity controlled extract air terminal device
BS EN 13141-9:2008 BS EN 13141-9:2008. Ventilation for buildings. Performance testing of components/products for residential ventilation. Externally mounted humidity controlled air transfer device
"BS EN 15552:2008 BS EN 15552:2008. Packaging. Complete, filled transport packages and unit loads. Performance testing schedules for common distribution chains"
"BS EN 1634-2:2008 BS EN 1634-2:2008. Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware. Fire resistance characterisation test f"
BS EN 60793-1-1:2008 BS EN 60793-1-1:2008. Optical fibres. Measurement methods and test procedures. General and guidance
DD ISO/TS 16610-32:2009 DD ISO/TS 16610-32:2009. Geometrical product specifications (GPS). Filtration. Robust profile filters. Spline filters
DD ISO/TS 15530-4:2008 DD ISO/TS 15530-4:2008. Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Evaluating task-
BS ISO 11495:2008 BS ISO 11495:2008. Jewellery. Determination of palladium in palladium jewellery alloys. Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal stand
BS ISO 11494:2008 BS ISO 11494:2008. Jewellery. Determination of platinum in platinum jewellery alloys. Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standar
BS EN 1366-3:2009 BS EN 1366-3:2009. Fire resistance tests for service installations. Penetration seals
BS ISO 19141:2008 BS ISO 19141:2008. Geographic information. Schema for moving features
DD ISO/TS 19101-2:2008 DD ISO/TS 19101-2:2008. Geographic information. Reference model. Imagery
BS ISO/IEC 24727-3:2008 BS ISO/IEC 24727-3:2008. Identification cards. Integrated circuit card programming interfaces. Application interface
BS ISO 12646:2008 BS ISO 12646:2008. Graphic technology. Displays for colour proofing. Characteristics and viewing conditions
BS ISO 26987:2008 BS ISO 26987:2008. Resilient floor coverings. Determination of staining and resistance to chemicals
"BS ISO 10816-7:2009 BS ISO 10816-7:2009. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Rotodynamic pumps for industrial applications, including measureme"
BS EN 1197:2006 BS EN 1197:2006. Chemicals used for treatment of water intended for human consumption. Monozinc phosphate solution
BS EN 13126-12:2008 BS EN 13126-12:2008. Building hardware. Requirements and test methods for windows and doors height windows. Side hung projecting reversible hardware
BS EN 13126-11:2008 BS EN 13126-11:2008. Building hardware. Requirements and test methods for windows and doors height windows. Top hung projecting reversible hardware
BS EN 30-1-1:2008 BS EN 30-1-1:2008. Domestic cooking appliances burning gas. Safety. General
BS 8300:2009 BS 8300:2009. Design of buildings and their approaches to meet the needs of disabled people. Code of practice
08/30153731 DC 08/30153731 DC. BS ISO/IEC 19784-1 AMD2. Information technology. Biometric application programming interface. Part 1. BioAPI Specification
BS ISO 10263-6:2009 BS ISO 10263-6:2009. Earth-moving machinery. Operator enclosure environment. Determination of effect of solar heating
BS ISO 10263-5:2009 BS ISO 10263-5:2009. Earth-moving machinery. Operator enclosure environment. Windscreen defrosting system test method
"BS ISO 10263-4:2009 BS ISO 10263-4:2009. Earth-moving machinery. Operator enclosure environment. Heating, ventilating and air conditioning (HVAC) test method and performance"
BS ISO 10263-3:2009 BS ISO 10263-3:2009. Earth-moving machinery. Operator enclosure environment. Pressurization test method
BS ISO 10263-2:2009 BS ISO 10263-2:2009. Earth-moving machinery. Operator enclosure environment. Air filter element test method
BS ISO 10263-1:2009 BS ISO 10263-1:2009. Earth-moving machinery. Operator enclosure environment. Terms and definitions
BS EN 61968-13:2008 BS EN 61968-13:2008. Application integration at electric utilities. System interfaces for distribution management. CIM RDF Model exchange format for distribution
BS ISO 9276-6:2008 BS ISO 9276-6:2008. Representation of results of particle size analysis. Descriptive and quantitative representation of particle shape and morphology
BS EN 62137-1-3:2009 BS EN 62137-1-3:2009. Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Cyclic drop test
"BS EN 61249-2-35:2009 BS EN 61249-2-35:2009. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Modified epoxide woven E-glass laminate shee"
BS IEC 60748-2-20:2008 BS IEC 60748-2-20:2008. Semiconductor devices. Integrated circuits. Digital integrated circuits. Family specification. Low voltage integrated circuits
BS EN 60384-20:2008 BS EN 60384-20:2008. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
BS ISO 6752:2008 BS ISO 6752:2008. Tools for pressing. Round punches with 60 degrees conical head and straight shank
BS EN 60793-2-50:2008 BS EN 60793-2-50:2008. Optical fibres. Product specifications. Sectional specification for class B single-mode fibres
BS EN 60793-2:2008 BS EN 60793-2:2008. Optical fibres. Product specifications. General
NA to BS EN 1999-1-5:2007 NA to BS EN 1999-1-5:2007. UK National Annex to Eurocode 9. Design of aluminium structures. Shell structures
NA to BS EN 1999-1-4:2007 NA to BS EN 1999-1-4:2007. UK National Annex to Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting
"BS ISO 21009-1:2008 BS ISO 21009-1:2008. Cryogenic vessels. Static vacuum-insulated vessels. Design, fabrication, inspection and tests"
NA to BS EN 1999-1-2:2007 NA to BS EN 1999-1-2:2007. UK National Annex to Eurocode 9. Design of aluminium structures. Structural fire design
BS EN 15482:2007 BS EN 15482:2007. Chemicals used for treatment of water intended for human consumption. Sodium permanganate
BS EN 1367-6:2008 BS EN 1367-6:2008. Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing in the presence of salt (NaCl)
"BS EN 61834-11:2008 BS EN 61834-11:2008. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). HDV"
BS EN 60958-1:2008 BS EN 60958-1:2008. Digital audio interface. General
08/30153135 DC 08/30153135 DC. BS ISO 28218. Radiation protection. Performance criteria for radiobioassay
"BS EN 61280-2-2:2008 BS EN 61280-2-2:2008. Fibre optic communication subsystem test procedures. Digital systems. Optical eye pattern, waveform and extinction ratio measurement"
BS EN 60079-10-1:2009 BS EN 60079-10-1:2009. Explosive atmospheres. Classification of areas. Explosive gas atmospheres
08/30152793 DC 08/30152793 DC. BS IEC 62484. Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive ma
BS EN 15457:2007 BS EN 15457:2007. Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi
BS ISO 12176-2:2008 BS ISO 12176-2:2008. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Electrofusion
BS EN 60034-4:2008 BS EN 60034-4:2008. Rotating electrical machines. Methods for determining synchronous machine quantities from tests
BS EN 62024-2:2009 BS EN 62024-2:2009. High frequency inductive components. Electrical characteristics and measuring methods. Rated current of inductors for DC to DC converters
08/30152590 DC 08/30152590 DC. BS ISO 25111. CALM using public networks. General requirements
BS ISO 21218:2008 BS ISO 21218:2008. Intelligent transport systems. Communications access for land mobiles (CALM). Medium service access points
BS EN 15199-3:2008 BS EN 15199-3:2008. Petroleum products. Determination of boiling range distribution by gas chromatography method. Crude oil
BS ISO 15484:2008 BS ISO 15484:2008. Road vehicles. Brake lining friction materials. Product Definition and quality assurance
BS EN 12722:2009 BS EN 12722:2009. Furniture. Assessment of surface resistance to dry heat
BS EN 12721:2009 BS EN 12721:2009. Furniture. Assessment of surface resistance to wet heat
BS EN 12720:2009 BS EN 12720:2009. Furniture. Assessment of surface resistance to cold liquids
09/30152273 DC 09/30152273 DC. BS IEC/TS 60034-20-2. Rotating Electrical Machines. Part 20-2. Performance characteristics and testing specifications for Brushless Permanent Magnet Motors
BS EN 62457:2008 BS EN 62457:2008. Multimedia home networks. Home network communication protocol over IP for multimedia household appliances
BS ISO 15096:2008 BS ISO 15096:2008. Jewellery. Determination of silver in 999 0/00 silver jewellery alloys. Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES)
"BS ISO 15093:2008 BS ISO 15093:2008. Jewellery. Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys. Difference method using inductively coupled plasma optical e"
BS EN 60851-5:2008 BS EN 60851-5:2008. Winding wires. Test methods. Electrical properties
BS ISO 25137-2:2009 BS ISO 25137-2:2009. Plastics. Sulfone polymer moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 25137-1:2009 BS ISO 25137-1:2009. Plastics. Sulfone polymer moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 6401:2008 BS EN ISO 6401:2008. Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gas-chromatographic method
BS EN ISO 3451-1:2008 BS EN ISO 3451-1:2008. Plastics. Determination of ash. General methods
"BS EN ISO 898-1:2009 BS EN ISO 898-1:2009. Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitc"
BS ISO 23317:2007 BS ISO 23317:2007. Implants for surgery. In vitro evaluation for apatite-forming ability of implant materials
BS EN ISO 3452-6:2008 BS EN ISO 3452-6:2008. Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
BS EN ISO 3452-5:2008 BS EN ISO 3452-5:2008. Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
BS EN 1410:2008 BS EN 1410:2008. Chemicals used for treatment of water intended for human consumption. Cationic polyacrylamides
BS EN 1408:2008 BS EN 1408:2008. Chemicals used for treatment of water intended for human consumption. Poly (diallyldimethylammonium chloride)
BS EN 1407:2008 BS EN 1407:2008. Chemicals used for treatment of water intended for human consumption. Anionic and non-ionic polyacrylamides
BS EN 12175:2006 BS EN 12175:2006. Chemicals used for treatment of water intended for human consumption. Hexafluorosilicic acid
BS EN 12174:2006 BS EN 12174:2006. Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate
BS EN 61970-453:2008 BS EN 61970-453:2008. Energy management system application program interface (EMS-API). CIM based graphics exchange
BS ISO 27467:2009 BS ISO 27467:2009. Nuclear criticality safety. Analysis of a postulated criticality accident
09/30151431 DC 09/30151431 DC. BS ISO 27048. Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure
08/30151326 DC 08/30151326 DC. BS ISO 26843. Metallic materials. Measurement of fracture toughness of steels at impact loading rates using precracked Charpy specimens
BS ISO 10840:2008 BS ISO 10840:2008. Plastics. Guidance for the use of standard fire tests
BS EN 60034-3:2008 BS EN 60034-3:2008. Rotating electrical machines. Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines
"PD ISO/TR 22305:2008 PD ISO/TR 22305:2008. Cigarettes. Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke. Analysis of data from collaborative s"
"09/30150998 DC 09/30150998 DC. BS IEC 60532. Radiation protection instrumentation. Installed dose rate meters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV"
BS 7984:2008 BS 7984:2008. Keyholding and response services. Code of practice
BS EN ISO 5771:2008 BS EN ISO 5771:2008. Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification
BS ISO 3525:2008 BS ISO 3525:2008. Oil of amyris (Amyris balsamifera L.)
08/30150852 DC 08/30150852 DC. BS ISO 14620-2. Space systems. Safety requirements. Part 2. Launch site operations
"BS EN 4641-001:2009 BS EN 4641-001:2009. Aerospace series. Cables, optical, 125 μm diameter cladding. Technical specification"
BS EN ISO 14509-1:2008 BS EN ISO 14509-1:2008. Small craft. Airborne sound emitted by powered recreational craft. Pass-by measurement procedures
BS EN 61000-4-30:2009 BS EN 61000-4-30:2009. Electromagnetic compatability (EMC). Testing and measurement techniques. Power quality measurement methods
BS ISO 1952:2008 BS ISO 1952:2008. Solid mineral fuels. Determination of extractable metals in dilute hydrochloric acid
BS ISO 12003-2:2008 BS ISO 12003-2:2008. Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors. Rear-mounted ROPS
BS ISO 12003-1:2008 BS ISO 12003-1:2008. Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors. Front-mounted ROPS
BS EN ISO 6803:2008 BS EN ISO 6803:2008. Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
BS EN ISO 12004-2:2008 BS EN ISO 12004-2:2008. Metallic materials. Sheet and strip. Determination of forming-limit curves. Determination of forming-limit curves in the laboratory
BS EN ISO 12004-1:2008 BS EN ISO 12004-1:2008. Metallic materials. Sheet and strip. Determination of forming-limit curves. Measurement and application of forming-limit diagrams in the press shop
BS EN ISO 17491-4:2008 BS EN ISO 17491-4:2008. Protective clothing. Test methods for clothing providing protection against chemicals. Determination of resistance to penetration by a spray of liquid (s
BS EN ISO 17491-3:2008 BS EN ISO 17491-3:2008. Protective clothing. Test methods for clothing providing protection against chemicals. Determination of resistance to penetration by a jet of liquid (jet
09/30150333 DC 09/30150333 DC. BS ISO 23461. Space systems. Programme management. Nonconformance control system
08/30150300 DC 08/30150300 DC. BS ISO 23460. Space projects. Programme management. Dependability assurance requirements
BS EN 1715-4:2008 BS EN 1715-4:2008. Aluminium and aluminium alloys. Drawing stock. Specific requirements for welding applications
BS EN 1715-3:2008 BS EN 1715-3:2008. Aluminium and aluminium alloys. Drawing stock. Specific requirements for mechanical uses (excluding welding)
BS EN 1715-2:2008 BS EN 1715-2:2008. Aluminium and aluminium alloys. Drawing stock. Specific requirements for electrical applications
BS EN 1715-1:2008 BS EN 1715-1:2008. Aluminium and aluminium alloys. Drawing stock. General requirements and technical conditions for inspection and delivery
BS EN 1474-1:2008 BS EN 1474-1:2008. Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems. Design and testing of transfer arms
BS EN 9104-003:2009 BS EN 9104-003:2009. Aerospace series. Quality management systems. Requirements for aerospace quality management system (AQMS) auditor training and qualification
BS EN 13277-7:2009 BS EN 13277-7:2009. Protective equipment for martial arts. Additional requirements and test methods for hand and foot protectors
BS EN 60601-2-39:2008 BS EN 60601-2-39:2008. Medical electrical equipment. Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
ISO8375 : 2009 EDTN2 ISO8375 : 2009 EDTN2. ISO8375 : 2009 Timber structures - Glued laminated timber - Test methods for determination of physical and mechanical properties
"ISO26304 : 2008 EDTN1 ISO26304 : 2008 EDTN1. ISO 26304 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength"
09/30150058 DC 09/30150058 DC. BS 1139-2.2. Metal scaffolding. Part 2-2. Couplers. Aluminium couplers and special couplers in steel. Requirements and test methods
BS EN ISO 20541:2008 BS EN ISO 20541:2008. Milk and milk products. Determination of nitrate content. Method by enzymatic reduction and molecular- absorption spectrometry after Griess reaction
BS ISO 7146-2:2008 BS ISO 7146-2:2008. Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearings. Cavitation erosion and its countermeasures
BS ISO 1382:2008 BS ISO 1382:2008. Rubber. Vocabulary
"BS EN 1380:2009 BS EN 1380:2009. Timber structures. Test methods. Load bearing nails, screws, dowels and bolts"
BS EN 409:2009 BS EN 409:2009. Timber structures. Test methods. Determination of the yield moment of dowel type fasteners
BS EN ISO 22854:2008 BS EN ISO 22854:2008. Liquid petroleum products. Determination of hydrocarbon types and oxygenates in automotive-motor gasoline. Multidimensional gas chromatography method
BS ISO 10952:2008 BS ISO 10952:2008. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack for the inside of a s
BS 4515-1:2009 BS 4515-1:2009. Specification for welding of steel pipelines on land and offshore. Carbon and carbon manganese steel pipelines
BS ISO 4141-4:2009 BS ISO 4141-4:2009. Road vehicles. Multi-core connecting cables. Test methods and requirements for coiled cable assemblies
BS EN 62471:2008 BS EN 62471:2008. Photobiological safety of lamps and lamp systems
BS EN 60974-5:2008 BS EN 60974-5:2008. Arc welding equipment. Wire feeders
BS EN 60974-2:2008 BS EN 60974-2:2008. Arc welding equipment. Liquid cooling systems
BS ISO 11843-5:2008 BS ISO 11843-5:2008. Capability of detection. Methodology in the linear and non-linear calibration cases
BS EN ISO 13500:2008 BS EN ISO 13500:2008. Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
BS EN ISO 2439:2008 BS EN ISO 2439:2008. Flexible cellular polymeric materials. Determination of hardness (indentation technique)
BS EN 13138-1:2008 BS EN 13138-1:2008. Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be worn
BS ISO 18192-1:2008 BS ISO 18192-1:2008. Implants for surgery. Wear of total intervertebral spinal disc prostheses. Loading and displacement parameters for wear testing and corresponding environmental
"BS EN 60794-3-30:2008 BS EN 60794-3-30:2008. Optical fibres. Outdoor cables. Family specification for optical telecommunication cables for lakes, river crossings and coastal application"
BS EN 15507:2008 BS EN 15507:2008. Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades
BS EN ISO 9073-16:2008 BS EN ISO 9073-16:2008. Textiles. Test methods for nonwovens. Determination of resistance to penetration by water (hydrostatic pressure)
09/30148338 DC 09/30148338 DC. BS EN 55032. Electromagnetic compatibility of multimedia equipment. Emission requirements
BS EN 60255-22-3:2008 BS EN 60255-22-3:2008. Measuring relays and protection equipment. Electrical disturbance tests. Radiated electromagnetic field immunity
BS EN 61400-21:2008 BS EN 61400-21:2008. Wind turbines. Measurement and assessment of power quality characteristics of grid connected wind turbines
BS EN 61076-3-116:2008 BS EN 61076-3-116:2008. Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for protective housings for use with 8-way shield
BS EN 15376:2007 BS EN 15376:2007. Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
BS ISO 4701:2008 BS ISO 4701:2008. Iron ores and direct reduced iron. Determination of size distribution by sieving
08/30147932 DC 08/30147932 DC. BS ISO 23339. Space systems. Unmanned spacecraft. Requirements for estimating the mass of remaining usable propellant
BS ISO 26603:2008 BS ISO 26603:2008. Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of total chlorine
BS ISO 16628:2008 BS ISO 16628:2008. Tracheobronchial tubes. Sizing and marking
08/30147406 DC 08/30147406 DC. BS IEC 62465. Nuclear power plants. Instrumentation and control important to safety. Management of aging of electrical cabling systems
BS EN 438-8:2009 BS EN 438-8:2009. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for design laminates
BS 8488-1:2009 BS 8488-1:2009. Prefabricated wiring systems intended for permanent connection in fixed installations. Specification
BS EN 15483:2008 BS EN 15483:2008. Ambient air quality. Atmospheric measurements near ground with FTIR spectroscopy
"BS 5422:2009 BS 5422:2009. Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C"
"BS 476-10:2009 BS 476-10:2009. Fire tests on building materials and structures. Guide to the principles, selection, role and application of fire testing and their outputs"
08/30147189 DC 08/30147189 DC. BS EN ISO 4787. Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS ISO 22108:2008 BS ISO 22108:2008. Space systems. Non-flight items in flight hardware. Identification and control
BS ISO 18437-4:2008 BS ISO 18437-4:2008. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Dynamic stiffness method
08/30147086 DC 08/30147086 DC. BS ISO 690. Information and documentation. Guidelines for bibliographic references and citations to information resources
"09/30146978 DC 09/30146978 DC. BS ISO 21338. Water quality. Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kin"
"BS EN 3712:2007 BS EN 3712:2007. Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2, lubricated. Classification: 1100 MPa (a"
08/30146763 DC 08/30146763 DC. BS IEC 62463. Radiation protection instrumentation. X-ray systems for the screening of persons for security and the carrying of illicit items
BS EN 60085:2008 BS EN 60085:2008. Electrical insulation. Thermal evaluation and designation
BS ISO 24637:2009 BS ISO 24637:2009. Space systems. Electromagnetic interference (EMI) test reporting requirements
BS ISO 24638:2008 BS ISO 24638:2008. Space systems. Pressure components and pressure system integration
BS ISO 21648:2008 BS ISO 21648:2008. Space systems. Flywheel module design and testing
BS EN 15363:2007 BS EN 15363:2007. Chemicals used for treatment of swimming pool water. Chlorine
BS EN 15362:2007 BS EN 15362:2007. Chemicals used for treatment of swimming pool water. Sodium carbonate
BS ISO 15106-4:2008 BS ISO 15106-4:2008. Plastics. Film and sheeting. Determination of water vapour transmission rate. Gas-chromatographic detection sensor method
BS ISO 16000-17:2008 BS ISO 16000-17:2008. Indoor air. Detection and enumeration of moulds. Culture-based method
BS ISO 16000-16:2008 BS ISO 16000-16:2008. Indoor air. Detection and enumeration of moulds. Sampling by filtration
BS EN ISO 16000-15:2008 BS EN ISO 16000-15:2008. Indoor air. Sampling strategy for nitrogen dioxide (NO2)
BS ISO 16000-13:2008 BS ISO 16000-13:2008. Indoor air. Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans
BS EN 1176-10:2008 BS EN 1176-10:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for fully enclosed play equipment
BS ISO 9838:2008 BS ISO 9838:2008. Alpine and touring ski-bindings. Test soles for ski- binding tests
BS ISO 9231:2008 BS ISO 9231:2008. Milk and milk products. Determination of the benzoic and sorbic acid contents
08/30146003 DC 08/30146003 DC. BS ISO/IEC 19794-5 AMD2. Biometric data interchange formats. Part 5. Face image data
BS ISO 23380:2008 BS ISO 23380:2008. Selection methods for the determination of trace elements in coal
BS ISO 1170:2008 BS ISO 1170:2008. Coal and coke. Calculation of analyses to different bases
"BS EN 15316-4-7:2008 BS EN 15316-4-7:2008. Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Space heating generation systems, biomass combust"
BS EN 13696:2008 BS EN 13696:2008. Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance
BS EN 61970-402:2008 BS EN 61970-402:2008. Energy management system application program interface (EMS-API). Common services
09/30145360 DC 09/30145360 DC. BS EN 61850-9-2. Communication networks and systems for power utility automation. Part 9-2. Specific Communication Service Mapping (SCSM). Sampled values over ISO/IEC 88
BS EN 60703:2009 BS EN 60703:2009. Test methods for electroheating installations with electron guns
BS EN 60519-7:2009 BS EN 60519-7:2009. Safety in electroheat installations. Particular requirements for installations with electron guns
BS ISO 7146-1:2008 BS ISO 7146-1:2008. Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearings. General
"BS EN 13958:2008 BS EN 13958:2008. Aluminium and aluminium alloys. Cold drawn, round, coiled tube for general applications. Specification"
"BS EN 13957:2008 BS EN 13957:2008. Aluminium and aluminium alloys. Extruded round, coiled tube for general applications. Specification"
BS EN 1301-3:2008 BS EN 1301-3:2008. Aluminium and aluminium alloys. Drawn wire. Tolerances on dimensions
BS EN 1301-2:2008 BS EN 1301-2:2008. Aluminium and aluminium alloys. Drawn wire. Mechanical properties
BS EN 1301-1:2008 BS EN 1301-1:2008. Aluminium and aluminium alloys. Drawn wire. Technical conditions for inspection and delivery
BS ISO 15014:2007 BS ISO 15014:2007. Plastics. Extruded sheets of poly(vinylidene fluoride) (PVDF). Requirements and test methods
PD IEC/TR 60695-1-21:2008 PD IEC/TR 60695-1-21:2008. Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
DD CLC/TS 60034-25:2008 DD CLC/TS 60034-25:2008. Rotating electrical machines. Guidance for the design and performance of a.c. motors specifically designed for converter supply
BS ISO/IEC 24727-2:2008 BS ISO/IEC 24727-2:2008. Identification cards. Integrated circuit card programming interfaces. Generic card interface
"BS EN 61326-3-2:2008 BS EN 61326-3-2:2008. Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and for equipment intend"
BS EN 15272-3:2007 BS EN 15272-3:2007. Inland navigation vessels. Equipment for rope leading. Roller fairleads
"BS EN 60641-3-1:2008 BS EN 60641-3-1:2008. Pressboard and presspaper for electrical purposes. Specifications for individual materials. Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B."
PD ISO/TR 18792:2008 PD ISO/TR 18792:2008. Lubrication of industrial gear drives
BS EN 60601-2-29:2008 BS EN 60601-2-29:2008. Medical electrical equipment. Particular requirements for the basic safety and essential performance of radiotherapy simulators
08/30144215 DC 08/30144215 DC. BS ISO 4987. Steel and iron castings. Liquid penetrant inspection
08/30144212 DC 08/30144212 DC. BS ISO 4986. Steel and iron casting. Magnetic particle inspection
"BS ISO 26825:2008 BS ISO 26825:2008. Anaesthetic and respiratory equipment. User-applied labels for syringes containing drugs used during anaesthesia. Colours, design and performance"
BS EN ISO 21536:2007 BS EN ISO 21536:2007. Non-active surgical implants. Joint replacement implants. Specific requirements for knee-joint replacement implants
BS ISO 21439:2009 BS ISO 21439:2009. Clinical dosimetry. Beta radiation sources for brachytherapy
BS EN 60317-0-1:2008 BS EN 60317-0-1:2008. Specifications for particular types of winding wires. General requirements. Enamelled round copper wire
BS EN ISO 21535:2007 BS EN ISO 21535:2007. Non-active surgical implants. Joint replacement implants. Specific requirements for hip-joint replacement implants
BS EN 15446:2008 BS EN 15446:2008. Fugitive and diffuse emissions of common concern to industry sectors. Measurement of fugitive emission of vapours generating from equipment and piping leaks
BS EN 15445:2008 BS EN 15445:2008. Fugitive and diffuse emissions of common concern to industry sectors. Qualification of fugitive dust sources by reverse dispersion modelling
08/30143688 DC 08/30143688 DC. BS ISO/IEC 15961-3. Information technology. Radio frequency identification (RFID) for item management. Part 3. Data protocol: RFID data constructs
08/30143685 DC 08/30143685 DC. BS ISO/IEC 15961-2. Information technology. Radio frequency identification (RFID) for item management. Data protocol. Part 2. Registration of RFID data constructs
"08/30143668 DC 08/30143668 DC. BS EN ISO 14005. Environmental management systems. Guidelines for the phased implementation of an environmental management system, including the use of environmental per"
BS ISO 11971:2008 BS ISO 11971:2008. Steel and iron castings. Visual examination of surface quality
BS ISO 4993:2009 BS ISO 4993:2009. Steel and iron castings. Radiographic inspection
BS EN 62428:2008 BS EN 62428:2008. Electric power engineering. Modal components in three- phase a.c. systems. Quantities and transformations
08/30143593 DC 08/30143593 DC. BS EN 12568. Foot and leg protectors. Requirements and test methods for toecaps and penetration-resistant inserts
BS ISO 14050:2009 BS ISO 14050:2009. Environmental management. Vocabulary
BS EN 15436-2:2008 BS EN 15436-2:2008. Road service area maintenance equipment. Performance assessment
BS EN 15436-1:2008 BS EN 15436-1:2008. Road service area maintenance equipment. Terminology
BS ISO 11001-3:2009 BS ISO 11001-3:2009. Agricultural wheeled tractors and implements. Three- point hitch couplers. Link coupler
BS ISO 2332:2009 BS ISO 2332:2009. Agricultural tractors and machinery. Connection of implements via three-point linkage. Clearance zone around implement
"BS ISO 730:2009 BS ISO 730:2009. Agricultural wheeled tractors. Rear-mounted three-point Linkage. Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4"
BS ISO/IEC 21827:2008 BS ISO/IEC 21827:2008. Information technology. Security techniques. Systems security engineering. Capability maturity model (SSE- CMM)
BS EN ISO 14683:2007 BS EN ISO 14683:2007. Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
BS EN ISO 10211:2007 BS EN ISO 10211:2007. Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations
BS 6375-3:2009 BS 6375-3:2009. Performance of windows and doors. Classification for additional performance characteristics and guidance on selection and specification
BS 6375-2:2009 BS 6375-2:2009. Performance of windows and doors. Classification for operation and strength characteristics and guidance on selection and specification
BS 6375-1:2009 BS 6375-1:2009. Performance of windows and doors. Classification for weathertightness and guidance on selection and specification
BS 4873:2009 BS 4873:2009. Aluminium alloy windows and doorsets. Specification
BS 644:2009 BS 644:2009. Timber windows. Fully finished factory-assembled windows of various types. Specification
BS ISO 25177:2008 BS ISO 25177:2008. Soil quality. Field soil description
BS EN 60300-3-4:2008 BS EN 60300-3-4:2008. Dependability management. Application guide. Guide to the specification of dependability requirements
09/30142765 DC 09/30142765 DC. BS 8482. Cereals. Method for determination of the screenings and admixture content of wheat (Triticum aestivum L. ) and durum wheat (Triticum durum Desf.)
BS EN 50483-6:2009 BS EN 50483-6:2009. Test requirements for low voltage aerial bundled cable accessories. Environmental testing
BS EN 50483-5:2009 BS EN 50483-5:2009. Test requirements for low voltage aerial bundled cable accessories. Electrical ageing test
BS EN 50483-4:2009 BS EN 50483-4:2009. Test requirements for low voltage aerial bundled cable accessories. Connectors
BS EN 50483-3:2009 BS EN 50483-3:2009. Test requirements for low voltage aerial bundled cable accessories. Tension and suspension clamps for neutral messenger system
BS EN 50483-2:2009 BS EN 50483-2:2009. Test requirements for low voltage aerial bundled cable accessories. Tension and suspension clamps for self supporting system
BS EN 50483-1:2009 BS EN 50483-1:2009. Test requirements for low voltage aerial bundled cable accessories. Generalities
BS EN 15423:2008 BS EN 15423:2008. Ventilation for buildings. Fire precaution for air distribution systems in buildings
BS 8479:2008 BS 8479:2008. Textiles. Method for determination of the propensity of fabrics to snagging. Rotating chamber method
ISO9927-1 : 2009 ED2 ISO9927-1 : 2009 ED2. Cranes - Inspection. Part 1: General
BS EN 60384-18-1:2007 BS EN 60384-18-1:2007. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) elect
BS EN 60384-18:2007 BS EN 60384-18:2007. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic surface mount capacitors with solid (Mn02) and non- sol
BS EN 61051-1:2008 BS EN 61051-1:2008. Varistors for use in electronic equipment. Generic specification
BS EN 10343:2009 BS EN 10343:2009. Steels for quenching and tempering for construction purposes. Technical delivery conditions
"08/30142165 DC 08/30142165 DC. BS 5834-4. Surface boxes, guards and underground chambers for utilities purposes. Part 4. Specification for utility chambers"
"08/30142158 DC 08/30142158 DC. BS 5834-2. Surface boxes, guards and underground chambers for gas and utilities’ purposes. Part 2. Specification for surface boxes"
09/30142128 DC 09/30142128 DC. BS ISO 11462-2. Guidelines for implementation of statistical process control (SPC). Part 2. Catalogue of tools and techniques
BS ISO 3290-2:2008 BS ISO 3290-2:2008. Rolling bearings. Balls. Ceramic balls
DD ISO/TS 16281:2008 DD ISO/TS 16281:2008. Rolling bearings. Methods for calculating the modified reference rating life for universally loaded bearings
09/30142058 DC 09/30142058 DC. BS ISO/IEC 13249-7. Information technology. Database languages. SQL multimedia and application packages. Part 7. History
BS EN 50408:2008 BS EN 50408:2008. Household and similar electrical appliances. Safety. Particular requirements for cab heaters for vehicles
BS ISO 24394:2008 BS ISO 24394:2008. Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components
BS EN 927-5:2006 BS EN 927-5:2006. Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of the liquid water permeability
BS EN 927-3:2006 BS EN 927-3:2006. Paints and varnishes. Coating materials and coating systems for exterior wood. Natural weathering test
BS EN 15389:2008 BS EN 15389:2008. Industrial valves. Performance characteristics of thermoplastic valves when used as construction products
ISO11484 : 2009 ED2 ISO11484 : 2009 ED2. Steel products. Employers qualification system for non-destructive testing (NDT) personnel
BS EN 61800-7-1:2008 BS EN 61800-7-1:2008. Adjustable speed electrical power drive systems. Generic interface and use of profiles for power drive systems. Interface definition
"BS EN 62135-1:2008 BS EN 62135-1:2008. Resistance welding equipment. Safety requirements for design, manufacture and installation"
"BS EN ISO 8537:2008 BS EN ISO 8537:2008. Sterile single-use syringes, with or without needle, for insulin"
"BS ISO/IEC 24751-3:2008 BS ISO/IEC 24751-3:2008. Information technology. Individualized adaptability and accessibility in e-learning, education and training. Access for all digital resource descript"
"BS ISO/IEC 24751-2:2008 BS ISO/IEC 24751-2:2008. Information technology. Individualized adaptability and accessibility in e-learning, education and training. Access for all personal needs and prefer"
"BS ISO/IEC 24751-1:2008 BS ISO/IEC 24751-1:2008. Information technology. Individualized adaptability and accessibility in e-learning, education and training. Framework and reference model"
BS ISO 2709:2008 BS ISO 2709:2008. Information and documentation. Format for information exchange
BS 5228-2:2009 BS 5228-2:2009. Code of practice for noise and vibration control on construction and open sites. Vibration
BS 5228-1:2009 BS 5228-1:2009. Code of practice for noise and vibration control on construction and open sites. Noise
BS EN 15382:2008 BS EN 15382:2008. Geosynthetic barriers. Characteristics required for use in transportation infrastructure
BS EN ISO 10414-1:2008 BS EN ISO 10414-1:2008. Petroleum and natural gas industries. Field testing of drilling fluids. Water-based fluids
BS EN 927-2:2006 BS EN 927-2:2006. Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification
"BS EN ISO 25457:2008 BS EN ISO 25457:2008. Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service"
BS EN 15635:2008 BS EN 15635:2008. Steel static storage systems. Application and maintenance of storage equipment
"BS ISO 815-2:2008 BS ISO 815-2:2008. Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures"
"BS EN 15377-2:2008 BS EN 15377-2:2008. Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Design, dimensioning and installation"
BS EN ISO 9346:2007 BS EN ISO 9346:2007. Hygrothermal performance of buildings and building materials. Physical quantities for mass transfer. Vocabulary
"BS EN ISO 24598:2007 BS EN ISO 24598:2007. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels. Cla"
BS EN ISO 11890-1:2007 BS EN ISO 11890-1:2007. Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method
BS ISO 23041:2007 BS ISO 23041:2007. Space systems. Unmanned spacecraft operational procedures. Documentation
BS EN 15617:2009 BS EN 15617:2009. Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels
"BS EN 60512-16-17:2008 BS EN 60512-16-17:2008. Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16q. Tensile and compressive strength, f"
"BS EN 60512-16-16:2008 BS EN 60512-16-16:2008. Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16p. Torsional strength, fixed male tabs"
"BS EN 60512-16-14:2008 BS EN 60512-16-14:2008. Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16n. Bending strength, fixed male tabs"
BS EN 60512-16-7:2008 BS EN 60512-16-7:2008. Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16g. Measurement of contact deformation af
BS EN 60512-16-6:2008 BS EN 60512-16-6:2008. Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16f. Robustness of terminations
BS EN 60512-16-5:2008 BS EN 60512-16-5:2008. Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16e. Gauge retention force (resilient cont
BS EN 60512-16-3:2008 BS EN 60512-16-3:2008. Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16c. Contact-bending strength
BS EN 60512-15-7:2008 BS EN 60512-15-7:2008. Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15g. Robustness of protective cover attachment
"BS EN 60512-15-4:2008 BS EN 60512-15-4:2008. Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15d. Contact insertion, release and extraction force"
BS EN 60512-15-3:2008 BS EN 60512-15-3:2008. Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15c. Insert retention in housing (torsional)
08/30140202 DC 08/30140202 DC. BS 8103-3. Structual design of low-rise buildings. Part 3. Code of practice for timber floors and roofs for housing
BS ISO 22734-1:2008 BS ISO 22734-1:2008. Hydrogen generators using water electrolysis process. Industrial and commercial applications
BS EN 60512-15-1:2008 BS EN 60512-15-1:2008. Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15a. Contact retention in insert
BS EN ISO 15548-3:2008 BS EN ISO 15548-3:2008. Non-destructive testing. Equipment for eddy current examination. System characteristics and verification
BS EN ISO 15548-2:2008 BS EN ISO 15548-2:2008. Non-destructive testing. Equipment for eddy current examination. Probe characteristics and verification
BS EN ISO 15548-1:2008 BS EN ISO 15548-1:2008. Non-destructive testing. Equipment for eddy current examination. Instrument characteristics and verification
"BS EN 60068-2-64:2008 BS EN 60068-2-64:2008. Environmental testing. Tests. Test Fh. Vibration, broadband random and guidance"
BS EN 50136-1-5:2008 BS EN 50136-1-5:2008. Alarm systems. Alarm transmission systems and equipment. Requirements for packet switched network PSN
"BS EN 55025:2008 BS EN 55025:2008. Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers"
BS EN 419-1:2009 BS EN 419-1:2009. Non-domestic gas-fired overhead luminous radiant heaters. Safety
BS EN 416-1:2009 BS EN 416-1:2009. Single burner gas-fired overhead radiant tube heaters for non-domestic use. Safety
BS ISO 24393:2008 BS ISO 24393:2008. Rolling bearings. Linear motion rolling bearings. Vocabulary
BS EN 777-3:2009 BS EN 777-3:2009. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System F. Safety
BS EN 777-1:2009 BS EN 777-1:2009. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System D. Safety
DD CEN ISO/TS 17665-2:2009 DD CEN ISO/TS 17665-2:2009. Sterilization of health care products. Moist heat. Guidance on the application of ISO 17665-1
BS 1722-16:2009 BS 1722-16:2009. Fences. Specification for powder coatings used as a plastics finish to components and mesh
BS EN ISO 5359:2008 BS EN ISO 5359:2008. Low-pressure hose assemblies for use with medical gases
BS EN 15288-2:2008 BS EN 15288-2:2008. Swimming pools. Safety requirements for operation
BS EN 60794-2-41:2008 BS EN 60794-2-41:2008. Optical fibre cables. Indoor cables. Product specification for simplex and duplex buffered A4 fibres
BS EN 60794-2-40:2008 BS EN 60794-2-40:2008. Optical fibre cables. Indoor optical fibre cables. Family specification for A4 fibre cables
BS ISO 23830:2008 BS ISO 23830:2008. Surface chemical analysis. Secondary-ion mass spectrometry. Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
BS EN 60068-2-20:2008 BS EN 60068-2-20:2008. Environmental testing. Tests. Test T. Test methods for solderability and resistance to soldering heat of devices with leads
"BS EN ISO 6224:2008 BS EN ISO 6224:2008. Thermoplastics hoses, textile-reinforced, for general- purpose water applications. Specification"
"BS EN ISO 1403:2008 BS EN ISO 1403:2008. Rubber hoses, textile-reinforced, for general-purpose water applications. Specification"
ISO8539 : 2009 EDTN2 ISO8539 : 2009 EDTN2. ISO 8539 Forged steel lifting components for use with Grade 8 chain
"BS EN 60068-2-31:2008 BS EN 60068-2-31:2008. Environmental testing. Tests. Test Ec. Rough handling shocks, primarily for equipment-type specimens"
"BS EN ISO 15882:2008 BS EN ISO 15882:2008. Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results"
BS EN ISO 13736:2008 BS EN ISO 13736:2008. Determination of flash point. Abel closed-cup method
BS ISO 21213:2008 BS ISO 21213:2008. Intelligent transport systems. Communications access for land mobiles (CALM). 3G Cellular systems
BS ISO 21212:2008 BS ISO 21212:2008. Intelligent transport systems. Communications access for land mobiles (CALM). 2G Cellular systems
"BS EN 60079-14:2008 BS EN 60079-14:2008. Explosive atmospheres. Electrical installations design, selection and erection"
BS ISO 8468:2007 BS ISO 8468:2007. Ships and marine technology. Ships bridge layout and associated equipment. Requirements and guidelines
"09/30137917 DC 09/30137917 DC. BS 7533-10 AMD1. Pavements constructed with clay, natural stone or concrete pavers. Part 10. Guide for the structural design of trafficked pavements constructed of natur"
"09/30137914 DC 09/30137914 DC. BS 7533-7 AMD1. Pavements constructed with clay, natural stone, or concrete pavers. Part 7. Code of practice for the construction of pavements of natural stone paving un"
BS EN 61400-25-4:2008 BS EN 61400-25-4:2008. Wind turbines. Communications for monitoring and control of wind power plants. Mapping to communication profile
ISO21458 : 2008 EDTN1 ISO21458 : 2008 EDTN1. ISO24158 : 2008 Water quality - Determination of glyphosate and AMPA - Method using high performance liquid chromatography (HPLC) and fluorometric detectio
BS ISO 22036:2008 BS ISO 22036:2008. Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma-atomic emission spectrometry (ICP-AES)
BS ISO 19712-1:2008 BS ISO 19712-1:2008. Plastics. Decorative solid surfacing materials. Classification and specifications
BS EN 60689:2009 BS EN 60689:2009. Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
BS EN 61753-101-3:2009 BS EN 61753-101-3:2009. Fibre optic interconnecting devices and passive components performance standard. Fibre management systems for Category U. Uncontrolled environment
BS EN 60512-25-9:2008 BS EN 60512-25-9:2008. Connectors for electronic equipment. Tests and measurements. Signal integrity tests. Test 25i. Alien crosstalk
BS ISO 5667-17:2008 BS ISO 5667-17:2008. Water quality. Sampling. Guidance on sampling of bulk suspended solids
BS 6739:2009 BS 6739:2009. Code of practice for instrumentation in process control systems: installation design and practice
BS ISO 22856:2008 BS ISO 22856:2008. Equipment for crop protection. Methods for the laboratory measurement of spray drift. Wind tunnels
BS EN ISO 4597-1:2008 BS EN ISO 4597-1:2008. Plastics. Hardeners and accelerators for epoxy resins. Designation
BS ISO 8642:2008 BS ISO 8642:2008. Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods
BS EN ISO 5398-2:2009 BS EN ISO 5398-2:2009. Leather. Chemical determination of chromic oxide content. Quantification by colorimetric determination
BS EN 62031:2008 BS EN 62031:2008. LED modules for general lighting. Safety specifications
BS ISO 11500:2008 BS ISO 11500:2008. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS ISO 16212:2008 BS ISO 16212:2008. Cosmetics. Microbiology. Enumeration of yeast and mould
BS EN 60695-1-30:2008 BS EN 60695-1-30:2008. Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Preselection testing process. General guidelines
BS EN 15288-1:2008 BS EN 15288-1:2008. Swimming pools. Safety requirements for design
BS EN ISO 945-1:2008 BS EN ISO 945-1:2008. Microstructure of cast irons. Graphite classification by visual analysis
"BS EN 61996-1:2008 BS EN 61996-1:2008. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Voyage data recorder (VDR). Performance requirements, met"
BS ISO/IEC 15946-1:2008 BS ISO/IEC 15946-1:2008. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. General
BS EN 62220-1-3:2008 BS EN 62220-1-3:2008. Medical electrical equipment. Characteristics of digital X-ray imaging devices. Determination of the detective quantum efficiency. Detectors used in dynamic
BS EN 12517-2:2008 BS EN 12517-2:2008. Non-destructive testing of welds. Evaluation of welded joints in aluminium and its alloys by radiography. Acceptance levels
BS EN 15268:2008 BS EN 15268:2008. Petrol filling stations. Safety requirements for the construction of submersible pump assemblies
BS EN 15527:2008 BS EN 15527:2008. Characterization of waste. Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
08/30135161 DC 08/30135161 DC. BS ISO/IEC 18014-2. Information technology. Security techniques. Time-stamping services. Part 2. Mechanisms producing independent tokens
BS ISO/IEC 18014-1:2008 BS ISO/IEC 18014-1:2008. Information technology. Security techniques. Time- stamping services. Framework
BS ISO 22010:2007 BS ISO 22010:2007. Space systems. Mass properties control
08/30135059 DC 08/30135059 DC. BS ISO/IEC 9797-2. Information technology. Security techniques. Message authentication codes (MACs). Part 2. Mechanisms using a dedicated hash-function
BS EN ISO 148-2:2008 BS EN ISO 148-2:2008. Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 148-3:2008 BS EN ISO 148-3:2008. Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact
BS EN ISO 14607:2007 BS EN ISO 14607:2007. Non-active surgical implants. Mammary implants. Particular requirements
"BS EN ISO 7197:2006 BS EN ISO 7197:2006. Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components"
BS EN 60335-2-108:2008 BS EN 60335-2-108:2008. Household and similar electrical appliances. Safety. Particular requirements for electrolysers
BS EN ISO 10456:2007 BS EN ISO 10456:2007. Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values
BS ISO 25101:2009 BS ISO 25101:2009. Water quality. Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA). Method for unfiltered samples using solid phase extraction and liqui
BS EN ISO 12718:2008 BS EN ISO 12718:2008. Non-destructive testing. Eddy current testing. Vocabulary
BS ISO 21278-1:2008 BS ISO 21278-1:2008. Equipment for crop protection. Induction hoppers. Test methods
BS ISO 22900-2:2009 BS ISO 22900-2:2009. Road vehicles. Modular vehicle communication interface (MVCI). Diagnostic protocol data unit application programming interface (D-PDU API)
BS EN 15227:2008 BS EN 15227:2008. Railway applications. Crashworthiness requirements for railway vehicle bodies
BS ISO 22915-10:2008 BS ISO 22915-10:2008. Industrial trucks. Verification of stability. Additional stability test for trucks operating in the special condition of stacking with load laterally displac
BS ISO 22915-8:2008 BS ISO 22915-8:2008. Industrial trucks. Verification of stability. Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and
BS EN 60076-6:2008 BS EN 60076-6:2008. Power transformers. Reactors
BS EN ISO 21003-2:2008 BS EN ISO 21003-2:2008. Multilayer piping systems for hot and cold water installations inside buildings. Pipes
BS EN ISO 21003-1:2008 BS EN ISO 21003-1:2008. Multilayer piping systems for hot and cold water installations inside buildings. General
BS EN 1177:2008 BS EN 1177:2008. Impact attenuating playground surfacing. Determination of critical fall height
"BS EN 60317-55:2008 BS EN 60317-55:2008. Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180"
BS EN ISO 13790:2008 BS EN ISO 13790:2008. Energy performance of buildings. Calculation of energy use for space heating and cooling
BS ISO 22901-1:2008 BS ISO 22901-1:2008. Road vehicles. Open diagnostic data exchange (ODX). Data model specification
ISO18213-3 : 2009 EDTN1 ISO18213-3 : 2009 EDTN1. Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 3: Statistical methods
08/30133461 DC 08/30133461 DC. BS ISO/IEC 27003. Information technology. Security techniques. Information security management system implementation guidance
"BS EN 13071-2:2008 BS EN 13071-2:2008. Stationary waste containers up to 5000 l, top lifted and bottom emptied. Additional requirements for underground or partly underground systems"
"BS EN 13071-1:2008 BS EN 13071-1:2008. Stationary waste containers up to 5000 l, top lifted and bottom emptied. General requirements"
"BS ISO 812:2006 BS ISO 812:2006. Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness"
BS EN 1090-2:2008 BS EN 1090-2:2008. Execution of steel structures and aluminium structures. Technical requirements for the execution of steel structures
BS ISO 6550-3:2009 BS ISO 6550-3:2009. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs
BS EN ISO 15743:2008 BS EN ISO 15743:2008. Ergonomics of the thermal environment. Cold workplaces. Risk assessment and management
DD ISO TS 17837:2008 DD ISO TS 17837:2008. Milk and milk products. Determination of nitrogen content and crude protein calculation. Kjeldahl method
BS EN 15060:2006 BS EN 15060:2006. Paints and varnishes. Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
BS EN 927-6:2006 BS EN 927-6:2006. Paints and varnishes. Coating materials and coating systems for exterior wood. Exposure of wood coatings to artificial weathering using fluorescent UV lamps and wate
BS EN 936:2006 BS EN 936:2006. Chemicals used for treatment of water intended for human consumption. Carbon dioxide
BS ISO 4126-9:2008 BS ISO 4126-9:2008. Safety devices for protection against excessive pressure. Application and installation of safety devices excluding stand-alone bursting disc safety devices
BS ISO 6194-4:2009 BS ISO 6194-4:2009. Rotary shaft lip-type seals incorporating elastomeric sealing elements. Performance test procedures
BS ISO 6194-2:2009 BS ISO 6194-2:2009. Rotary shaft lip-type seals incorporating elastomeric sealing elements. Vocabulary
BS ISO 22434:2006 BS ISO 22434:2006. Transportable gas cylinders. Inspection and maintenance of cylinder valves
BS EN 1019:2005 BS EN 1019:2005. Chemicals used for treatment of water intended for human consumption. Sulfur dioxide
BS EN 15094:2008 BS EN 15094:2008. Safety of machinery. Safety requirements for cold flat rolling mills
BS EN 15093:2008 BS EN 15093:2008. Safety of machinery. Safety requirements for hot flat rolling mills
BS EN 15181:2008 BS EN 15181:2008. Measuring method of the energy consumption of gas fired ovens
BS EN 901:2007 BS EN 901:2007. Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite
BS EN 15078:2006 BS EN 15078:2006. Chemicals used for treatment of swimming pool water. Sulfuric acid
BS EN 15077:2006 BS EN 15077:2006. Chemicals used for treatment of swimming pool water. Sodium hypochlorite
BS EN 15076:2006 BS EN 15076:2006. Chemicals used for treatment of swimming pool water. Sodium hydroxide
BS EN 15075:2006 BS EN 15075:2006. Chemicals used for treatment of swimming pool water. Sodium hydrogen carbonate
BS EN 15074:2006 BS EN 15074:2006. Chemicals used for treatment of swimming pool water. Ozone
BS EN 15427:2008 BS EN 15427:2008. Railway applications. Wheel/rail friction management. Flange lubrication
BS EN 15166:2008 BS EN 15166:2008. Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
BS ISO 1496-2:2008 BS ISO 1496-2:2008. Series 1 freight containers. Specification and testing. Thermal containers
"BS EN ISO 8254-1:2009 BS EN ISO 8254-1:2009. Paper and board. Measurement of specular gloss. 75 degree gloss with a converging beam, TAPPI method"
NA to BS EN 1999-1-3:2007 NA to BS EN 1999-1-3:2007. UK National Annex to Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue
NA to BS EN 1999-1-1:2007 NA to BS EN 1999-1-1:2007. UK National Annex to Eurocode 9. Design of aluminium structures. General structural rules
BS EN 61753-084-2:2008 BS EN 61753-084-2:2008. Fibre optic interconnecting devices and passive components performance standard. Non connectorised single-mode 980/1550 nm WWDM devices for category C. C
BS 8521:2009 BS 8521:2009. Specification for dual-tone multi-frequency (DTMF) signalling protocol for social alarm systems
BS ISO 12575-2:2007 BS ISO 12575-2:2007. Thermal insulation products. Exterior insulating systems for foundations. Principal responsibilities of installers
BS EN ISO 9073-9:2008 BS EN ISO 9073-9:2008. Textiles. Test methods for nonwovens. Determination of drapability including drape coefficient
BS ISO 16889:2008 BS ISO 16889:2008. Hydraulic fluid power. Filters. Multi-pass method for evaluating filtration performance of a filter element
"BS ISO 9255:2008 BS ISO 9255:2008. Aerospace. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to"
"BS ISO 3186:2008 BS ISO 3186:2008. Aerospace. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 M"
"BS ISO 13921:2008 BS ISO 13921:2008. Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metal"
"BS ISO 5857:2008 BS ISO 5857:2008. Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification"
"BS ISO 5856:2008 BS ISO 5856:2008. Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic"
"BS ISO 3193:2008 BS ISO 3193:2008. Aerospace. Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal"
"BS ISO 3185:2008 BS ISO 3185:2008. Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equa"
"BS ISO 8279:2008 BS ISO 8279:2008. Aerospace. Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient"
"BS ISO 7689:2008 BS ISO 7689:2008. Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification"
BS ISO 20860-1:2008 BS ISO 20860-1:2008. Road vehicles. 50 ohms impedance radio frequency connection system interface. Dimensions and electrical requirements
BS EN 60318-6:2008 BS EN 60318-6:2008. Electroacoustics. Simulators of human head and ear. Mechanical coupler for the measurement of bone vibrators
BS EN 15041:2006 BS EN 15041:2006. Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polyphosphates
BS EN 15040:2006 BS EN 15040:2006. Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Phosphonic acids and salts
BS EN 15039:2006 BS EN 15039:2006. Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polycarboxilic acids and salts
BS EN 15031:2006 BS EN 15031:2006. Chemicals used for treatment of swimming pool water. Aluminium based coagulants

Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/portal/index.asp?typeid=1

http://www.findstandards.info/portal/index.asp?typeid=2

http://www.findstandards.info/portal/index.asp?typeid=3

http://www.findstandards.info/portal/index.asp?typeid=4

http://www.findstandards.info/portal/index.asp?typeid=5