Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/portal/index.asp?typeid=1

http://www.findstandards.info/portal/index.asp?typeid=2

http://www.findstandards.info/portal/index.asp?typeid=3

http://www.findstandards.info/portal/index.asp?typeid=4

http://www.findstandards.info/portal/index.asp?typeid=5

ISO/IEC29341-11-10 : 2008 EDTN1 ISO/IEC29341-11-10 : 2008 EDTN1. ISO/IEC29341-11-10 : 2008 Information technology. UPnP Device Architecture. Part 11-10: Quality of Service Device Control Protocol. Lev
ISO/IEC29341-11-2 : 2008 EDTN1 ISO/IEC29341-11-2 : 2008 EDTN1. ISO/IEC29341-11-2 : 2008 Information technology. UPnP Device Architecture. Part 11-2: Quality of Service Device Control Protocol. Level 2
ISO/IEC29341-11-1 : 2008 EDTN1 ISO/IEC29341-11-1 : 2008 EDTN1. ISO/IEC29341-11-1 : 2008 Information technology. UPnP Device Architecture. Part 11-1: Quality of Service Device Control Protocol. Level 2
ISO/IEC29341-10-12 : 2008 EDTN1 ISO/IEC29341-10-12 : 2008 EDTN1. ISO/IEC29341-10-12 : 2008 Information technology. UPnP Device Architecture. Part 10-12: Quality of Service Device Control Protocol. Qua
ISO/IEC29341-10-11 : 2008 EDTN1 ISO/IEC29341-10-11 : 2008 EDTN1. ISO/IEC29341-10-11 : 2008 Information technology. UPnP Device Architecture. Part 10-11: Quality of Service Device Control Protocol. Qua
ISO/IEC29341-10-10 : 2008 EDTN1 ISO/IEC29341-10-10 : 2008 EDTN1. ISO/IEC29341-10-10 : 2008 Information technology. UPnP Device Architecture. Part 10-10: Quality of Service Device Control Protocol. Qua
ISO/IEC29341-10-1 : 2008 EDTN1 ISO/IEC29341-10-1 : 2008 EDTN1. ISO/IEC29341-10-1 : 2008 Information technology. UPnP Device Architecture. Part 10-1: Quality of Service Device Control Protocol. Quality
ISO/IEC29341-7-11 : 2008 EDTN1 ISO/IEC29341-7-11 : 2008 EDTN1. ISO/IEC29341-11 : 2008 Information technology. UPnP Device Architecture. Part 7-11: Lighting Device Control Protocol. Switch Power Servic
ISO/IEC29341-7-10 : 2008 EDTN1 ISO/IEC29341-7-10 : 2008 EDTN1. ISO/IEC29341-7-10 : 2008 Information technology. UPnP Device Architecture. Part 7-10: Lighting Device Control Protcol. Dimming Service
ISO/IEC29341-7-2 : 2008 EDTN1 ISO/IEC29341-7-2 : 2008 EDTN1. ISO/IEC29341-7-2 : 2008 Information technology. UPnP Device Architecture. Part 7-2: Lighting Device Control Protocol. Dimmable Light Device
08/30194466 DC 08/30194466 DC. BS EN 1859. Chimneys. Metal chimneys. Test methods
ISO/IEC29341-7-1 : 2008 EDTN1 ISO/IEC29341-7-1 : 2008 EDTN1. ISO/IEC29341-7-1 : 2008 Information technology. UPnP Device Architecture. Part 7-1: Lighting Device Control Protocol. Binary Light Device
ISO/IEC29341-5-1 : 2008 EDTN1 ISO/IEC29341-5-1 : 2008 EDTN1. ISO/IEC29341-5-1 : 2008 Information technology. UPnP Device Architecture. Part 5-1: Digital Security Camera Device Control Protocol. Digita
ISO/IEC29341-5-10 : 2008 EDTN1 ISO/IEC29341-5-10 : 2008 EDTN1. ISO/IEC29341-5-10 : 2008 Information technology. UPnP Device Architecture. Part 5-10: Digital Security Camera Device Control Protocol. Di
ISO/IEC29341-5-11 : 2008 EDTN1 ISO/IEC29341-5-11 : 2008 EDTN1. ISO/IEC29341-5-11 : 2008 Information technology. UPnP Device Architecture. Part 5-11: Digital Security Camera Device Control Protocol. Di
ISO/IEC29341-5-12 : 2008 EDTN1 ISO/IEC29341-5-12 : 2008 EDTN1. ISO/IEC29341-5-12 : 2008 Information technology. UPnP Device Architecture. Part 5-12: Digital Security Camera Device Control Protocol. Di
"ISO/IEC29341-6-1 : 2008 EDTN1 ISO/IEC29341-6-1 : 2008 EDTN1. ISO/IEC29341-6-1 : 2008 Information technology. UPnP Device Architecture. Part 6-1: Heating, Ventilation and Air Conditioning Device Contro"
"ISO/IEC29341-6-2 : 2008 EDTN1 ISO/IEC29341-6-2 : 2008 EDTN1. ISO/IEC29341-6-2 : 2008 Information technology. UPnP Device Architecture. Part 6-2: Heating, Ventilation and Air Conditioning Device Contro"
"ISO/IEC29341-6-10 : 2008 EDTN1 ISO/IEC29341-6-10 : 2008 EDTN1. ISO/IEC29341-6-10 : 2008 Information technology. UPnP Device Architecture. Part 6-10: Heating, Ventilation and Air Conditioning Device Co"
"ISO/IEC29341-6-11 : 2008 EDTN1 ISO/IEC29341-6-11 : 2008 EDTN1. ISO/IEC 29341-6-11 : 2008 Information technology. UPnP Device Architecture. Part 6-11: Heating, Ventilation and Air Conditioning Device C"
"ISO/IEC29341-6-12 : 2008 EDTN1 ISO/IEC29341-6-12 : 2008 EDTN1. ISO/IEC29341-6-12 : 2008 Information technology. UPnP Device Architecture. Part 6-12: Heating, Ventilation and Air Conditioning Device Co"
"ISO/IEC29341-6-13 : 2008 EDTN1 ISO/IEC29341-6-13 : 2008 EDTN1. ISO/IEC29341-6-13 : 2008 Information technology. UPnP Device Architecture. Part 6-13: Heating, Ventilation and Air Conditioning Device Co"
"ISO/IEC29341-6-14 : 2008 EDTN1 ISO/IEC29341-6-14 : 2008 EDTN1. ISO/IEC29341-6-14 : 2008 Information technology. UPnP Device Architecture. Part 6-14: Heating, Ventilation and Air Conditioning Device Co"
"ISO/IEC29341-6-15 : 2008 EDTN1 ISO/IEC29341-6-15 : 2008 EDTN1. ISO/IEC29341-6-15 : 2008 Information technology. UPnP Device Architecture. Part 6-15: Heating, Ventilation and Air Conditioning Device Co"
"ISO/IEC29341-6-16 : 2008 EDTN1 ISO/IEC29341-6-16 : 2008 EDTN1. ISO/IEC29341-6-16 : 2008 Information technology. UPnP Device Architecture. Part 6-16: Heating, Ventilation and Air Conditioning Device Co"
"ISO/IEC29341-6-17 : 2008 EDTN1 ISO/IEC29341-6-17 : 2008 EDTN1. ISO/IEC29341-6-17 : 2008 Information technology. UPnP Device Architecture. Part 6-17: Heating, Ventilation and Air Conditioning Device Co"
ISO/IEC29341-13-10 : 2008 EDTN1 ISO/IEC29341-13-10 : 2008 EDTN1. ISO/IEC29341-13-10 : 2008 Information technology. UPnP Device Architecture. Part 13-10: Device Security Device Control Protocol. Device
ISO/IEC29341-13-11 : 2008 EDTN1 ISO/IEC29341-13-11 : 2008 EDTN1. ISO/IEC29341-13-11 : 2008 Information technology. UPnP Device Architecture. Part 13-11: Device Security Device Control Protocol. Securi
ISO/IEC29341-8-1 : 2008 EDTN1 ISO/IEC29341-8-1 : 2008 EDTN1. ISO/IEC29341-8-1 : 2008 Information technology. UPnP Device Architecture. Part 8-1: Internet Gateway Device Control Protocol. Internet Gate
ISO/IEC29341-8-2 : 2008 EDTN1 ISO/IEC29341-8-2 : 2008 EDTN1. ISO/IEC29341-8-2 : 2008 Information technology. UPnP Device Architecture. Part 8-2: Internet Gateway Device Control Protocol. Local Area Ne
ISO/IEC29341-8-3 : 2008 EDTN1 ISO/IEC29341-8-3 : 2008 EDTN1. ISO/IEC 29341-8-3 : 2008 Information technology. UPnP Device Architecture. Part 8-3: Internet Gateway Device Control Protocol. Wide Area Ne
ISO/IEC29341-8-4 : 2008 EDTN1 ISO/IEC29341-8-4 : 2008 EDTN1. ISO/IEC29341-8-4 : 2008 Information technology. UPnP Device Architecture. Part 8-4: Internet Gateway Device Control Protocol. Wide Area Net
ISO/IEC29341-8-5 : 2008 EDTN1 ISO/IEC29341-8-5 : 2008 EDTN1. ISO/IEC29341-8-5 : 2008 Information technology. UPnP Device Architecture. Part 8-5: Internet Gateway Device Control Protocol. Wireless Loca
ISO/IEC29341-8-10 : 2008 EDTN1 ISO/IEC29341-8-10 : 2008 EDTN1. ISO/IEC29341-8-10 : 2008 Information technology. UPnP Device Architecture. Part 8-10: Internet Gateway Device Control Protocol. Local Are
ISO/IEC29341-8-11 : 2008 EDTN1 ISO/IEC29341-8-11 : 2008 EDTN1. ISO/IEC29341-8-11 : 2008 Information technology. UPnP Device Architecture. Part 8-11: Internet Gateway Device Control Protocol. Layer 3 F
ISO/IEC29341-8-12 : 2008 EDTN1 ISO/IEC29341-8-12 : 2008 EDTN1. ISO/IEC29341-8-12 : 2008 Information technology. UPnP Device Architecture. Part 8-12: Internet Gateway Device Control Protocol. Link Auth
ISO/IEC29341-8-13 : 2008 EDTN1 ISO/IEC29341-8-13 : 2008 EDTN1. ISO/IEC29341-8-13 : 2008 Information technology. UPnP Device Architecture. Part 8-13: Internet Gateway Device Control Protocol. Radius Cl
ISO/IEC29341-8-14 : 2008 EDTN1 ISO/IEC29341-8-14 : 2008 EDTN1. ISO/IEC23941-8-14 : 2008 Information technology. UPnP Device Architecture. Part 8-14: Internet Gateway Device Control Protocol. Wide Area
08/30194409 DC 08/30194409 DC. PD 5500 AMD1. Specification for unfired fusion welded pressure vessels
ISO/IEC29341-8-15 : 2008 EDTN1 ISO/IEC29341-8-15 : 2008 EDTN1. ISO/IEC29341-8-15 : 2008 Information technology. UPnP Device Architecture. Part 8-15: Internet Gateway Device Control Protocol. Wide Area
ISO/IEC29341-8-16 : 2008 EDTN1 ISO/IEC29341-8-16 : 2008 EDTN1. ISO/IEC29341-8-16 : 2008 Information technology. UPnP Device Architecture. Part 8-16: Internet Gateway Device Control Protocol. Wide Area
ISO/IEC29341-8-17 : 2008 EDTN1 ISO/IEC29341-8-17 : 2008 EDTN1. ISO/IEC29341-8-17 : 2008 Information technology. UPnP Device Architecture. Part 8-17: Internet Gateway Device Control Protocol. Wide Area
ISO/IEC29341-8-18 : 2008 EDTN1 ISO/IEC29341-8-18 : 2008 EDTN1. ISO/IEC29341-8-18 : 2008 Information technology. UPnP Device Architecture. Part 8-18: Internet Gateway Device Control Protocol. Wide Area
ISO/IEC29341-8-19 : 2008 EDTN1 ISO/IEC29341-8-19 : 2008 EDTN1. ISO/IEC29341-8-19 : 2008 Information technology. UPnP Device Architecture. Part 8-19: Internet Gateway Device Control Protocol. Wide Area
ISO/IEC29341-8-20 : 2008 EDTN1 ISO/IEC29341-8-20 : 2008 EDTN1. ISO/IEC29341-8-20: 2008 Information technology. UPnP Device Architecture. Part 8-20: Internet Gateway Device Control Protocol. Wide Area
ISO/IEC29341-8-21 : 2008 EDTN1 ISO/IEC29341-8-21 : 2008 EDTN1. ISO/IEC 29341-8-21 : 2008 Information technology. UPnP Device Architecture. Part 8-21: Internet Gateway Device Control Protocol. Wireless
ISO/IEC29341-9-1 : 2008 EDTN1 ISO/IEC29341-9-1 : 2008 EDTN1. ISO/IEC29341-9-1 : 2008 Information technology. UPnP Device Architecture. Part 9-1: Imaging Device Control Protocol. Printer Device
ISO/IEC29341-9-2 : 2008 EDTN1 ISO/IEC29341-9-2 : 2008 EDTN1. ISO/IEC 29341-9-2 : 2008 Information technology. UPnP Device Architecture. Part 9-2: Imaging Device Control Protocol. Scanner Device
ISO/IEC29341-9-10 : 2008 EDTN1 ISO/IEC29341-9-10 : 2008 EDTN1. ISO/IEC29341-9-10 : 2008 Information technology. UPnP Device Architecture. Part 9-10: Imaging Device Control Protocol. External Activity
ISO/IEC29341-9-11 : 2008 EDTN1 ISO/IEC29341-9-11 : 2008 EDTN1. ISO/IEC29341-9-11 : 2008 Information technology. UPnP Device Architecture. Part 9-11: Imaging Device Control Protocol. Feeder Service
ISO/IEC29341-9-12 : 2008 EDTN1 ISO/IEC29341-9-12 : 2008 EDTN1. ISO.IEC29341-9-12 : 2008 Information technology. UPnP Device Architecture. Part 9-12: Imaging Device Control Protocol. Print Basic Servic
ISO/IEC29341-9-13 : 2008 EDTN1 ISO/IEC29341-9-13 : 2008 EDTN1. ISO/IEC29341-9-13 : 2008 Information technology. UPnP Device Architecture. Part 9-13: Imaging Device Control Protocol. Scan Service
ISO/IEC29341-4-13 : 2008 EDTN1 ISO/IEC29341-4-13 : 2008 EDTN1. ISO/IEC29341-4-13 : 2008 Information technology. UPnP Device Architecture. Part 4-13: Audio Video Device Control Protocol. Level 2. Rende
ISO/IEC29341-4-12 : 2008 EDTN1 ISO/IEC29341-4-12 : 2008 EDTN1. ISO/IEC29341-4-12 : 2008 Information technology. UPnP Device Architecture. Part 4-12: Audio Video Control Protocol. Level 2. Content Dire
ISO/IEC29341-4-11 : 2008 EDTN1 ISO/IEC29341-4-11 : 2008 EDTN1. ISO/IEC29341-4-11 : 2008 Information technology. UPnP Device Architecture. Part 4-11: Audio Video Device Control Protocol. Level 2. Conne
ISO/IEC29341-4-10 : 2008 EDTN1 ISO/IEC29341-4-10 : 2008 EDTN1. ISO/IEC29341-4-10 : 2008 Information technology. UPnP Device Architecture. Part 4-10: Audio Video Device Control Protocol. Level 2. Audio
ISO/IEC29341-4-2 : 2008 EDTN1 ISO/IEC29341-4-2 : 2008 EDTN1. ISO/IEC29341-4-2 : 2008 Information technology. UPnP Device Architecture. Part 4-2: Audio Video Device Control Protocol. Level 2. Media Ren
ISO/IEC29341-4-3 : 2008 EDTN1 ISO/IEC29341-4-3 : 2008 EDTN1. ISO/IEC29341-4-3 : 2008 Information technology. UPnP Device Architecture. Part 4-3: Audio Video Device Control Protocol. Level 2. Media Ser
ISO/IEC29341-4-4 : 2008 EDTN1 ISO/IEC29341-4-4 : 2008 EDTN1. ISO/IEC29341-4-4 : 2008 Information technology. UPnP Device Architecture. Part 4-4: Audio Video Device Control Protocol. Level 2. Audio Vid
ISO/IEC29341-3-13 : 2008 EDTN1 ISO/IEC29341-3-13 : 2008 EDTN1. ISO/IEC29341-3-13 : 2008 Information technology. UPnP Device Architecture. Part 3-13: Audio Video Device Control Protocol. Rendering Cont
ISO/IEC29341-3-12 : 2008 EDTN1 ISO/IEC29341-3-12 : 2008 EDTN1. ISO/IEC29341-3-12 : 2008 Information technology. UPnP Device Architecture. Part 3-12: Audio Video Device Control Protocol. Content Direct
ISO/IEC29341-3-11 : 2008 EDTN1 ISO/IEC29341-3-11 : 2008 EDTN1. ISO/IEC29341-3-11 : 2008 Information technology. UPnP Device Architecture. Part 3-11: Audio Video Device Control Protocol. Connection Man
ISO/IEC29341-3-10 : 2008 EDTN1 ISO/IEC29341-3-10 : 2008 EDTN1. ISO/IEC29341-3-10 : 2008 Information technology. UPnP Device Architecture. Part 3-10: Audio Video Device Control Protocol. Audio Video Tr
ISO/IEC29341-3-3 : 2008 EDTN1 ISO/IEC29341-3-3 : 2008 EDTN1. ISO/IEC 29341-3-3 : 2008 Information technology. UPnP Device Architecture. Part 3-3: Audio Video Device Control Protocol. Media Server Devi
ISO/IEC29341-3-2 : 2008 EDTN1 ISO/IEC29341-3-2 : 2008 EDTN1. ISO/IEC29341-3-2 : 2008 Information technology. UPnP Device Architecture. Part 3-2: Audio Video Device Control Protocol. Media Renderer Dev
ISO/IEC29341-2 : 2008 EDTN1 ISO/IEC29341-2 : 2008 EDTN1. ISO/IEC29341-2 : 2008 Information technology. UPnP Device Architecture. Part 2: Basic Device Control Protocol. Basic Device
09/30194359 DC 09/30194359 DC. BS EN 60034-18-34. Rotating electrical machines. Part 18-34. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermome
ISO/IEC29341-1 : 2008 EDTN1 ISO/IEC29341-1 : 2008 EDTN1. ISO/IEC219341-1 : 2008 Information technology. UPnP Device Architecture. Part 1: UPnP Device Architecture Version 1.0
ISO/IEC29341-3-1 : 2008 EDTN1 ISO/IEC29341-3-1 : 2008 EDTN1. ISO/IEC29341-3-1 : 2008 Information technology. UPnP Device Architecture. Part 3-1: Audio Video Device Control Protocol. Audio Video Archit
ISO/IEC29341-4-14 : 2008 EDTN1 ISO/IEC29341-4-14 : 2008 EDTN1. ISO/IEC29341-4-14 : 2008 Information technology. UPnP Device Architecture. Part 4-14: Audio video device control protocol. Level 2. Sched
09/30194345 DC 09/30194345 DC. BS EN 61386-25. Conduit systems for cable management. Part 25. Particular requirements. Conduit fixing devices
08/30194290 DC 08/30194290 DC. BS EN 1856-1. Chimneys. Requirements for metal chimneys. Part 1. System chimney products
BS EN 2542:2008 BS EN 2542:2008. Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts
09/30194273 DC 09/30194273 DC. BS EN 62208. Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
08/30194268 DC 08/30194268 DC. BS EN 61439-5. Low-voltage switchgear and controlgear assemblies. Part 5. Particular requirements for assemblies for power distribution in public networks
08/30194253 DC 08/30194253 DC. BS EN ISO 10833. Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test
08/30194204 DC 08/30194204 DC. BS EN 60598-1 AMD1. Luminaires. Part 1. General requirements and tests
"08/30194108 DC 08/30194108 DC. BS 7533-9. Pavements constructed with clay, natural stone or concrete pavers. Part 9. Code of practice for the construction of rigid pavements of clay pavers"
08/30194094 DC 08/30194094 DC. BS EN 13245-3. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Part 3. Designation of PVC-UE profiles
09/30194083 DC 09/30194083 DC. BS EN 15900. Energy efficiency services. Definitions and essential requirements
ISO/TS22745-2 : 2009 (CD-ROM) HEADER ED1 ISO/TS22745-2 : 2009 (CD-ROM) HEADER ED1. ISO/TS 22745-2 Industrial automation systems and integration - Open technical dictionaries and their application to m
"08/30194076 DC 08/30194076 DC. BS ISO 21091. Health informatics. Directory services for security, communications and identification of professionals and patients"
PD ISO/TR 12148:2009 PD ISO/TR 12148:2009. Natural gas. Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
09/30194066 DC 09/30194066 DC. BS ISO 11839. Machinery for forestry. Glazing and panel materials used in operator enclosures for protection against thrown objects. Test method and performance criteria
ISO/TS10891 : 2009 EDTN1 ISO/TS10891 : 2009 EDTN1. ISO/TS10891 : 2009 Freight containers - Radio frequency identification (RFID) - Licence plate tag
09/30194061 DC 09/30194061 DC. BS ISO 8721. Road vehicles. Measurement techniques in impact tests. Optical instrumentation
"09/30194058 DC 09/30194058 DC. BS ISO 27955. Road vehicles. Securing of cargo in passenger cars, station wagons and multi-purpose vehicles. Requirements and test methods"
ISO/TS22745-20 : 2009 (CDROM) HEADER ED1 ISO/TS22745-20 : 2009 (CDROM) HEADER ED1. ISO/TS 22745-20 Industrial automation systems and integration - Open technical dictionaries and their application to
ISO/TS22745-1 : 2009 (CD-ROM) HEADER ED1 ISO/TS22745-1 : 2009 (CD-ROM) HEADER ED1. ISO/TS 22745-1 Industrial automation systems and integration - Open technical dictionaries and their application to m
09/30194024 DC 09/30194024 DC. BS EN 15912. Durability of reaction to fire performances. Classes of fire retardant treated wood-based product in interior and exterior end use applications
"09/30194017 DC 09/30194017 DC. BS EN 480-10. Admixtures for concrete, mortar and grout. Test methods. Part 10. Determination of water soluble chloride content"
08/30194011 DC 08/30194011 DC. BS ISO 18308. Health informatics. Requirements for an electronic health record architecture
08/30193943 DC 08/30193943 DC. BS EN 62000. Single-mode fibre compatibility guidelines
08/30193922 DC 08/30193922 DC. BS EN 62439. Industrial communication networks. High availability automation networks
CWA 15897:2008 CWA 15897:2008. Submerged membrane bioreactor (MBR) technology
"ISO/IEC29121 : 2009 EDTN1 ISO/IEC29121 : 2009 EDTN1. ISO/IEC29121 : 2009 Information technology Digitally recorded media for information interchange and storage Data migration method for DVD-R, DVD-RW"
09/30193885 DC 09/30193885 DC. BS EN 861 AMD1. Safety of woodworking machines. Surface planing and thicknessing machines
08/30193881 DC 08/30193881 DC. BS EN 60939-1. Passive filter units for electromagnetic interference suppression. Part 1. Generic specification
09/30193875 DC 09/30193875 DC. BS EN ISO 11953. Dentistry. The performance of hand torque instruments for the clinical tightening of screw-retained joints in endosseous dental implant systems
09/30193867 DC 09/30193867 DC. BS EN ISO 16409 AMD1. Dentistry. Oral hygiene products. Manual interdental brushes
"08/30193847 DC 08/30193847 DC. BS EN 3475-605. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 605. Wet short circuit test"
"08/30193844 DC 08/30193844 DC. BS EN 3475-604. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 604. Resistance to dry arc propagation"
"08/30193841 DC 08/30193841 DC. BS EN 3475-603. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 603. Resistance to wet arc tracking"
BS ISO 16111:2008 BS ISO 16111:2008. Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
DD IEC/PAS 62593:2008 DD IEC/PAS 62593:2008. Measurement method of a half-wavelength voltage for Mach-Zehnder optical modulators in wireless communication and broadcasting systems
08/30193746 DC 08/30193746 DC. BS ISO/IEC 19505-2. Information technology. OMG Unified Modeling Language (OMG UML) Version 2.1.2. Part 2. Superstructure
08/30193743 DC 08/30193743 DC. BS ISO/IEC 19505-1. Information technology. OMG Unified Modeling Language (OMG UML) Version 2.1.2. Part 1. Infrastructure
08/30193715 DC 08/30193715 DC. BS EN 62246-1. Reed switches. Part 1. Generic specification
08/30193706 DC 08/30193706 DC. BS EN 61300-2-47. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-47. Tests. Thermal shocks
09/30193701 DC 09/30193701 DC. BS EN 15898. Conservation of cultural property. Main general terms and definitions concerning conservation of cultural property
09/30193698 DC 09/30193698 DC. BS EN 14080. Timber structures. Glued laminated timber and glued laminated solid timber. Requirements
09/30193685 DC 09/30193685 DC. BS ISO 4081. Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
"09/30193659 DC 09/30193659 DC. BS ISO 11089. Rubber, raw synthetic. Determination of anti-degradants by high-performance liquid chromatography"
"09/30193656 DC 09/30193656 DC. BS ISO 28564-1. Public information guidance systems. Part 1. Design principles and element requirements for location plans, maps and diagrams"
08/30193653 DC 08/30193653 DC. BS ISO 17123-1. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 1. Theory
08/30193650 DC 08/30193650 DC. BS ISO 2631-4 AMD1. Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration. Part 4. Guidlines for the evaluation of the effects of vibratio
08/30193639 DC 08/30193639 DC. BS EN ISO 105-C06. Textiles. Tests for colour fastness. Part C06. Colour fastness to domestic and commercial laundering
CWA 15893-2:2008 CWA 15893-2:2008. European e-competence framework. User guidelines. Version 1.0
CWA 15893-1:2008 CWA 15893-1:2008. European e-competence framework. The Framework. Version 1.0
BS EN 50342-3:2008 BS EN 50342-3:2008. Lead-acid starter batteries. Terminal system for batteries with 36 V nominal voltage
08/30193565 DC 08/30193565 DC. BS EN 61784-5. Industrial communication networks. Profiles. Part 5. Installation of fieldbuses
DD IEC/PAS 62587:2008 DD IEC/PAS 62587:2008. Method for measuring performance of portable household electric room air cleaners
09/30193547 DC 09/30193547 DC. BS 2TA 59. Specification for sheet of titanium-aluminium-vanadium alloy. Tensile strength 920-1180 MPa
09/30193545 DC 09/30193545 DC. BS 2TA 58. Specification for plate of titanium-copper alloy. Tensile strength 520-640 MPa. Maximum thickness 10 mm
09/30193543 DC 09/30193543 DC. BS 2TA 57. Specification for plate of titanium- aluminium-molybdenum-tin-silicon alloy. Tensile strength 1030-1220 MPa. Maximum thickness 65 mm
09/30193541 DC 09/30193541 DC. BS 2TA 56. Specification for plate of titanium- aluminium-vanadium alloy. Tensile strength 895-1150 MPa. Maximum thickness 100 mm
09/30193539 DC 09/30193539 DC. BS 2TA 52. Specification for sheet and strip of titanium-copper alloy. Tensile strength 690-920 MPa
09/30193537 DC 09/30193537 DC. BS 2TA 51. Forgings of titanium-aluminium-molybdenum- tin-silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to and including 150 mm
09/30193535 DC 09/30193535 DC. BS 2TA 50. Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to
08/30193511 DC 08/30193511 DC. BS EN 61508-4. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 4. Definitions and abbreviations
08/30193510 DC 08/30193510 DC. BS EN 61508-3. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 3. Software requirements
08/30193509 DC 08/30193509 DC. BS EN 61508-2. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 2. Requirements for electrical/electronic/programmable ele
08/30193508 DC 08/30193508 DC. BS EN 61508-1. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 1. General requirements
08/30193485 DC 08/30193485 DC. BS ISO 17212. Structural adhesives. Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
08/30193478 DC 08/30193478 DC. BS EN 61508-7. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 7. Overview of techniques and measures
08/30193474 DC 08/30193474 DC. BS EN 61508-5. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 5. Examples of methods for the determination of safety int
08/30193470 DC 08/30193470 DC. BS EN 61508-6. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 6. Guidelines on the application of IEC 61508-2 and IEC 61
08/30193443 DC 08/30193443 DC. BS EN ISO 11701. Vegetable fats and oils. Determination of phospholipids in lecithins by high performance liquid chromatography (HPLC) using a light scattering detector
08/30193440 DC 08/30193440 DC. BS EN 60335-2-72. Household and similar electrical appliances. Safety. Part 2-72. Particular requirements for automatic machines for floor treatment for commercial and i
"08/30193437 DC 08/30193437 DC. BS EN 4540. Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-luricating liner. Elevated load under low oscillations. Technical specifi"
"08/30193419 DC 08/30193419 DC. BS ISO 17631 AMD1. Ships and marine technology. Shipboard plans for fire protection, life saving appliances and means of escape"
"09/30193388 DC 09/30193388 DC. BS ISO 4666-1. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Part 1. Basic principles"
BS EN ISO 14889:2009 BS EN ISO 14889:2009. Ophthalmic optics. Spectacle lenses. Fundamental requirements for uncut finished lenses
"09/30193382 DC 09/30193382 DC. BS ISO 4647. Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test"
"09/30193379 DC 09/30193379 DC. BS ISO 813. Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method"
08/30193356 DC 08/30193356 DC. BS ISO 8724. Cork decorative panels. Specification
"09/30193349 DC 09/30193349 DC. BS ISO 11476. Paper and board. Determination of CIE-whiteness, C/2° (indoor illumination conditions)"
"08/30193331 DC 08/30193331 DC. BS EN 3475-307. Aerospace series. Cables, aircraft use. Test methods. Part 307. Corona extinction voltage"
08/30193326 DC 08/30193326 DC. BS EN 50377-14-1. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 14-1. Patch cords with EN 60
09/30193305 DC 09/30193305 DC. BS EN 15907. Film identification. Enhancing interoperability of metadata. Element sets and structures
09/30193302 DC 09/30193302 DC. BS EN 15518-3. Winter maintenance equipment. Road weather information systems. Part 3. Requirements on measured values of stationary equipments
09/30193299 DC 09/30193299 DC. BS EN 15518-2. Winter maintenance equipment. Road weather information systems. Part 2. Road weather. Recommended observation and forecast
09/30193296 DC 09/30193296 DC. BS EN 15518-1. Winter maintenance equipment. Road weather information systems. Part 1. Global definitions and components
"09/30193293 DC 09/30193293 DC. BS EN 12184. Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods"
09/30193290 DC 09/30193290 DC. BS EN 12183. Manual wheelchairs. Requirements and test methods
"09/30193260 DC 09/30193260 DC. BS 3TA 100. Procedure for inspection, testing and acceptance of wrought titanium and titanium alloys"
09/30193258 DC 09/30193258 DC. BS 3TA 28. Specification for forging stock and wire of titanium-aluminium-vanadium alloy (Tensile strength 1100 - 1300 MPa) (Limiting ruling section 20 mm)
09/30193256 DC 09/30193256 DC. BS 3TA 21. Specification for sheet and strip of titanium-copper alloy (Tensile strength 540 - 700 MPa)
09/30193254 DC 09/30193254 DC. BS 3TA 13. Specification for forgings of titanium- aluminium-vanadium alloy (Tensile strength 900 - 1160 MPa) (Limiting ruling section 150 mm)
09/30193252 DC 09/30193252 DC. BS 3TA 12. Specification for forging stock of titanium- aluminium-vanadium alloy (Tensile strength 900 - 1160 MPa) (Limiting ruling section 150 mm)
09/30193250 DC 09/30193250 DC. BS 3TA 11. Specification for bar and section for machining of titanium-aluminium-vanadium alloy (Tensile strength 900 - 1160 MPa) (Limiting ruling section 150 mm)
09/30193248 DC 09/30193248 DC. BS 3TA 10. Specification for sheet of titanium-aluminium-vanadium alloy (Tensile strength 960 - 1270 MPa)
09/30193246 DC 09/30193246 DC. BS 3TA 7. Specification for bar and section for machining of commercially pure titanium (Tensile strength 540 - 740 MPa)
09/30193244 DC 09/30193244 DC. BS 3TA 6. Specification for sheet and strip of commercially pure titanium (Tensile strength 570 - 730 MPa)
09/30193242 DC 09/30193242 DC. BS 3TA 2. Specification for sheet and strip of commercially pure titanium (Tensile strength 390 - 540 MPa)
09/30193240 DC 09/30193240 DC. BS 3TA 1. Specification for sheet and strip of commercially pure titanium (Tensile strength 290 - 420 MPa)
08/30193237 DC 08/30193237 DC. BS EN 50528. Insulating ladders for use on or near low voltage electrical installations
09/30193187 DC 09/30193187 DC. BS 2TA 49. Specification for bar and section for machining of titanium-aluminium-molybdenumtin- silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section ov
09/30193185 DC 09/30193185 DC. BS 2TA 48. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy. Tensile strength 1050-1200 MPa. Limiting ruling section 100 mm
09/30193183 DC 09/30193183 DC. BS 2TA 47. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy. Tensile strength 1050-1220 MPa. Limiting ruling section 100 mm
09/30193181 DC 09/30193181 DC. BS 2TA 46. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin -silicon alloy. Tensile strength 1050-1220 MPa. Limiting ruling section o
09/30193179 DC 09/30193179 DC. BS 2TA 45. Specification for bar and section for machining of titanium-aluminium- molybdenumtin-silicon alloy. Tensile strength 1100-1280 MPa. Limiting ruling section 25
09/30193177 DC 09/30193177 DC. BS 2TA 42. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1205-1375 MPa. Limiting ruling section over 25 mm up to
09/30193175 DC 09/30193175 DC. BS 2TA 41. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1205-1375 MPa. Limiting ruling section over 25 mm
09/30193173 DC 09/30193173 DC. BS 2TA 40. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1205-1375 MPa. Limiting ruling section over 25
09/30193171 DC 09/30193171 DC. BS 2TA 39. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1250-1420 MPa. Limiting ruling section 25 mm
09/30193169 DC 09/30193169 DC. BS 2TA 38. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1250-1420 MPa. Limiting ruling section 25 mm
08/30193158 DC 08/30193158 DC. BS EN ISO 12966-3. Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl esters. Part 3. Preparation of methyl esters using trimethylsulfonium hydr
08/30193157 DC 08/30193157 DC. BS EN ISO 13628-1 AMD2. Petroleum and natural gas industries. Design and operation of subsea production systems. Part 1. General requirements and recommendations
08/30193145 DC 08/30193145 DC. BS EN ISO 13628-1 AMD1. Petroleum and natural gas industries. Design and operation of subsea production systems. Part 1. General requirements and recommendations
"09/30193139 DC 09/30193139 DC. BS 8204-3 AMD1. Screeds, Bases and in-situ floorings. Part 3. Polymer modified cementitious levelling screeds and wearing screeds. Code of practice"
"09/30193137 DC 09/30193137 DC. BS 8204-2 AMD1. Screeds, Bases and in-situ floorings. Part 2. Concrete wearing surfaces. Code of practice"
"09/30193134 DC 09/30193134 DC. BS 8204-1 AMD1. Screeds, Bases and in-situ floorings. Part 1. Concrete bases and cement sand levelling screeds to receive floorings. Code of practice"
ISO/IEC15444-12 : 2008 EDTN3 ISO/IEC15444-12 : 2008 EDTN3. ISO/IEC15444-12 : 2008 Information technology JPEG 2000 image coding system. Part 12:ISO base media file format
ISO/IEC24757 : 2008 EDTN1 ISO/IEC24757 : 2008 EDTN1. ISO/IEC24757 : 2008 Information technology Keyboard interaction model Machine-readable keyboard description
08/30193112 DC 08/30193112 DC. BS EN 60870-5-6. Telecontrol equipment and systems. Part 5-6. Guidelines for conformance testing for the IEC 60870-5 companion standards
08/30193108 DC 08/30193108 DC. BS EN ISO 2440 AMD1. Flexible and rigid cellular polymeric materials. Accelerated aging tests
08/30193101 DC 08/30193101 DC. BS EN 50377-4-2. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 4-2. Type SC/APC simplex 8° t
09/30193095 DC 09/30193095 DC. BS EN 60811-607. Electric and optical fibre cables. Test methods for non-metallic materials. Part 607. Physical test. Test for the assessment of carbon black dispersion
09/30193091 DC 09/30193091 DC. BS EN 60811-606. Electric and optical fibre cables. Test methods for non-metallic materials. Part 606. Physical tests. Methods for determining the density
09/30193087 DC 09/30193087 DC. BS EN 60811-605. Electric and optical fibre cables. Test methods for non-metallic materials. Part 605. Physical tests. Measurement of carbon black and/or mineral filler
09/30193083 DC 09/30193083 DC. BS EN 60811-604. Electric and optical fibre cables. Test methods for non-metallic materials. Part 604. Physical tests. Measurement of absence of corrosive components in
09/30193079 DC 09/30193079 DC. BS EN 60811-603. Electric and optical fibre cables. Test methods for non-metallic materials. Part 603. Physical tests. Measurement of total acid number of filling compou
09/30193075 DC 09/30193075 DC. BS EN 60811-602. Electric and optical fibre cables. Test methods for non-metallic materials. Part 602. Physical Tests. Separation of oil in filling compounds
09/30193071 DC 09/30193071 DC. BS EN 60811-601. Electric and optical fibre cables. Test methods for non-metallic materials. Part 601. Physical tests. Measurement of the drop-point of filling compounds
09/30193067 DC 09/30193067 DC. BS EN 60811-513. Electric and optical fibre cables. Test methods for non-metallic materials. Part 513. Mechanical tests. Methods specific to polyethylene and polypropyle
09/30193063 DC 09/30193063 DC. BS EN 60811-512. Electric and optical fibre cables. Test methods for non-metallic materials. Part 512. Mechanical tests. Tensile strength and elongation at break after c
09/30193059 DC 09/30193059 DC. BS EN 60811-511. Electric and optical fibre cables. Test methods for non-metallic materials. Part 511. Mechanical tests. Measurement of the melt flow index of polyethyle
09/30193055 DC 09/30193055 DC. BS EN 60811-510. Electric and optical fibre cables. Test methods for non-metallic materials. Part 510. Mechanical tests. Methods specific to polyethylene and polypropyle
09/30193051 DC 09/30193051 DC. BS EN 60811-509. Electric and optical fibre cables. Test methods for non-metallic materials. Part 509. Mechanical tests. Test for resistance of insulations and sheaths t
09/30193047 DC 09/30193047 DC. BS EN 60811-508. Electric and optical fibre cables. Test methods for non-metallic materials. Part 508. Mechanical tests. Pressure test at high temperature for insulation
09/30193039 DC 09/30193039 DC. BS EN 60811-507. Electric and optical fibre cables. Test methods for non-metallic materials. Part 507. Mechanical tests. Hot set test for cross-linked materials
09/30193035 DC 09/30193035 DC. BS EN 60811-506. Electric and optical fibre cables. Test methods for non-metallic materials. Part 506. Mechanical tests. Impact test at low temperature for insulations a
09/30193031 DC 09/30193031 DC. BS EN 60811-505. Electric and optical fibre cables. Test methods for non-metallic materials. Part 505. Mechanical tests. Elongation at low temperature for insulations an
09/30193027 DC 09/30193027 DC. BS EN 60811-504. Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Bending tests at low temperature for insulation
09/30193023 DC 09/30193023 DC. BS EN 60811-503. Electric and optical fibre cables. Test methods for non-metallic materials. Part 503. Mechanical tests. Shrinkage test for sheaths
09/30193019 DC 09/30193019 DC. BS EN 60811-502. Electric and optical fibre cables. Test methods for non-metallic materials. Part 502. Mechanical tests. Shrinkage test for insulations
09/30193015 DC 09/30193015 DC. BS EN 60811-501. Electric and optical fibre cables. Test methods for non-metallic materials. Part 501. Mechanical tests. Tests for determining the mechanical properties
09/30193010 DC 09/30193010 DC. BS EN 60811-412. Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Environmental tests. Thermal ageing methods. Ageing in an air bomb
09/30193006 DC 09/30193006 DC. BS EN 60811-411. Electric and optical fibre cables. Test methods for non-metallic materials. Part 411. Environmental tests. Low temperature brittleness of filling compou
09/30193002 DC 09/30193002 DC. BS EN 60811-410. Electric and optical fibre cables. Test methods for non-metallic materials. Part 410. Environmental tests. Test method for copper-catalyzed oxidative de
09/30192998 DC 09/30192998 DC. BS EN 60811-409. Electric and optical fibre cables. Test methods for non-metallic materials. Part 409. Environmental tests. Loss of mass test for thermoplastic insulatio
09/30192994 DC 09/30192994 DC. BS EN 60811-408. Electric and optical fibre cables. Test methods for non-metallic materials. Part 408. Environmental tests. Long term stability test of polyethylene and
09/30192990 DC 09/30192990 DC. BS EN 60811-407. Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Environmental tests. Measurement of mass increase of polyethylene
09/30192986 DC 09/30192986 DC. BS EN 60811-406. Electric and optical fibre cables. Test methods for non-metallic materials. Part 406. Environmental tests. Resistance to environmental stress cracking o
09/30192982 DC 09/30192982 DC. BS EN 60811-405. Electric and optical fibre cables. Test methods for non-metallic materials. Part 405. Environmental tests. Thermal stability test for PVC insulations an
09/30192978 DC 09/30192978 DC. BS EN 60811-404. Electric and optical fibre cables. Test methods for non-metallic materials. Part 404. Environmental tests. Mineral oil immersion tests for sheaths made
09/30192974 DC 09/30192974 DC. BS EN 60811-403. Electric and optical fibre cables. Test methods for non-metallic materials. Part 403. Environmental tests. Ozone resistance test on elastomeric compound
09/30192970 DC 09/30192970 DC. BS EN 60811-402. Electric and optical fibre cables. Test methods for non-metallic materials. Part 402. Environmental tests. Water absorption tests
09/30192966 DC 09/30192966 DC. BS EN 60811-401. Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Environmental tests. Thermal ageing methods. Ageing in an air oven
09/30192962 DC 09/30192962 DC. BS EN 60811-302. Electric and optical fibre cables. Test methods for non-metallic materials. Part 302. Electrical tests. Measurement of the D.C. resistivity at 23°C and
09/30192958 DC 09/30192958 DC. BS EN 60811-301. Electric and optical fibre cables. Test methods for non-metallic materials. Part 301. Electrical tests. Measurement of the permittivity at 23°C of filli
09/30192954 DC 09/30192954 DC. BS EN 60811-203. Electric and optical fibre cables. Test methods for non-metallic materials. Part 203. General tests. Measurement of overall dimensions
09/30192947 DC 09/30192947 DC. BS EN 60811-202. Electric and optical fibre cables. Test methods for non-metallic materials. Part 202. General tests. Measurement of thickness of non-metallic sheath
09/30192943 DC 09/30192943 DC. BS EN 60811-201. Electric and optical fibre cables. Test methods for non-metallic materials. Part 201. General tests. Measurement of insulation thickness
09/30192939 DC 09/30192939 DC. BS EN 60811-100. Electric and optical fibre cables. Test methods for non-metallic materials. Part 100. General
ISO8536-7 : 2009 EDTN3 ISO8536-7 : 2009 EDTN3. ISO 8536-7 Infusion equipment for medical use. Part 7: Caps made of aluminium-plastics combinations for infusion bottles
"BS ISO 3767-2:2008 BS ISO 3767-2:2008. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for agricultural t"
08/30192887 DC 08/30192887 DC. BS ISO/IEC 24791-6. Information technology. Radio Frequency Identification (RFID) for item management. Software system infrastructure. Part 6. Security
08/30192855 DC 08/30192855 DC. BS ISO 5-4. Photography and graphic technology. Spectral density measurements. Part 4. Geometric conditions for reflection density
08/30192852 DC 08/30192852 DC. BS ISO 5-3. Photography and graphic technology. Spectral density measurements. Part 3. Spectral conditions
08/30192849 DC 08/30192849 DC. BS ISO 5-2. Photography and graphic Technology. Spectral density measurements. Part 2. Geometric conditions for transmission density
"08/30192846 DC 08/30192846 DC. BS ISO 5-1. Photography and graphic technology. Spectral density measurements. Part 1. Vocabulary, symbols and notations"
08/30192819 DC 08/30192819 DC. BS EN 50428 AMD2. Switches for household and similar fixed electrical installations. Collateral standard. Switches and related accessories for use in home and building e
"08/30192816 DC 08/30192816 DC. BS ISO/IEC 12785-1. Information technology. Learning, education, and training. Content packaging. Part 1. Information model"
09/30192810 DC 09/30192810 DC. BS ISO 10816-2. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 2. Land-based steam turbines and generators in excess o
09/30192807 DC 09/30192807 DC. BS ISO 7919-2. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Part 2. Land-based steam turbines and generators in excess of 50
ISO29002-5 : 2009 (CD-ROM) EDTN1 HEADER ISO29002-5 : 2009 (CD-ROM) EDTN1 HEADER. ISO 29002-5 Industrial automation systems and integration - Exchange of characteristic data. Part 5: Identification sch
09/30192800 DC 09/30192800 DC. BS ISO 29262. Production equipment for microsystems. Interface between endeffector and handling system
09/30192797 DC 09/30192797 DC. BS ISO 27875. Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages
"BS EN 15287-2:2008 BS EN 15287-2:2008. Chimneys. Design, installation and commissioning of chimneys. Chimneys for roomsealed appliances"
"BS EN 15287-1:2007 BS EN 15287-1:2007. Chimneys. Design, installation and commissioning of chimneys. Chimneys for non-roomsealed heating appliances"
08/30192771 DC 08/30192771 DC. BS EN 60704-2-2. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Part 2-2. Particular requirements for fan hea
08/30192767 DC 08/30192767 DC. BS EN 62301. Household electrical appliances. Management of standby power
09/30192761 DC 09/30192761 DC. BS EN 115-2. Safety of escalators and moving walks. Part 2. Rules for the improvement of safety of existing escalators and moving walks
09/30192733 DC 09/30192733 DC. BS EN 15643-1. Sustainability of construction works. Assessment of buildings. Part 1. General framework
09/30192729 DC 09/30192729 DC. BS EN 15643-2. Sustainability of construction works. Assessment of buildings. Part 2. Framework for the assessment of environmental performance
08/30192726 DC 08/30192726 DC. BS EN 1538. Execution of special geotechnical work. Diaphragm walls
08/30192723 DC 08/30192723 DC. BS EN 1536. Execution of special geotechnical work. Bored piles
08/30192697 DC 08/30192697 DC. BS ISO/IEC 9797-1. Information technology. Security techniques. Message authentication codes (MACs). Part 1. Mechanisms using a block cipher
ISO/IEC14496-12 : 2008 EDTN3 ISO/IEC14496-12 : 2008 EDTN3. ISO/IEC 14496-12:2008 Information technology. Coding of audio-visual objects. Part 12: ISO base media file format
"08/30192677 DC 08/30192677 DC. BS EN 6059-307. Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Part 307. Ageing"
"08/30192674 DC 08/30192674 DC. BS EN 6059-100. Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Part 100. General"
08/30192668 DC 08/30192668 DC. BS EN 62541-10. OPC Unified Architecture Specification. Part 10. Programs
08/30192664 DC 08/30192664 DC. BS EN 62541-9. OPC Unified Architecture Specification. Part 9. Alarms and Conditions
08/30192660 DC 08/30192660 DC. BS EN 62541-7. OPC Unified Architecture Specification. Part 7. Profiles
"08/30192648 DC 08/30192648 DC. BS EN 6049-007. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Part 007. Self-wrapping mechanical and electrical protective"
BS EN ISO 23747:2009 BS EN ISO 23747:2009. Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
BS EN ISO 10079-3:2009 BS EN ISO 10079-3:2009. Medical suction equipment. Suction equipment powered from a vacuum or pressure source
BS EN ISO 10079-1:2009 BS EN ISO 10079-1:2009. Medical suction equipment. Electrically powered suction equipment. Safety requirements (ISO 10079-1:1999)
BS EN ISO 10079-2:2009 BS EN ISO 10079-2:2009. Medical suction equipment. Manually powered suction equipment
BS EN ISO 17510-2:2009 BS EN ISO 17510-2:2009. Sleep apnoea breathing therapy. Masks and application accessories
09/30192470 DC 09/30192470 DC. BS ISO 19143. Geographic information. Filter encoding
09/30192467 DC 09/30192467 DC. BS EN ISO 19142. Geographic information. Web Feature Service
08/30192448 DC 08/30192448 DC. BS ISO 14708-5. Implants for surgery. Active implantable medical devices. Part 5. Circulatory support devices
09/30192442 DC 09/30192442 DC. BS ISO 17491-1. Protective clothing. Test methods for clothing providing protection against chemicals. Part 1. Determination of resistance to outward leakage of gases (i
09/30192433 DC 09/30192433 DC. BS ISO 21581. Timber structures. Static and cyclic lateral load test method for shear walls
09/30192417 DC 09/30192417 DC. BS ISO 16014-4. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 4. High-temperatu
09/30192414 DC 09/30192414 DC. BS ISO 16014-3. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. Low-temperatur
09/30192411 DC 09/30192411 DC. BS ISO 16014-2. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 2. Universal cali
09/30192408 DC 09/30192408 DC. BS ISO 16014-1. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 1. General princi
09/30192396 DC 09/30192396 DC. BS ISO 18280. Plastics. Epoxy resins. Test methods
DD ISO/TS 15869:2009 DD ISO/TS 15869:2009. Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks
09/30192362 DC 09/30192362 DC. BS EN 15892. Railway applications. Noise emission. Measurement of noise inside drivers cabs
09/30192344 DC 09/30192344 DC. BS EN 1060-3 AMD2. Non-invasive sphygmomanometers. Part 3. Supplementary requirements for electro-mechanical blood pressure measuring systems
09/30192341 DC 09/30192341 DC. BS EN 1060-2 AMD1. Non-invasive sphygmomanometers. Part 2. Supplementary requirements for mechanical sphygmomanometers
09/30192335 DC 09/30192335 DC. BS EN 33. WC pans and WC suites. Connecting dimensions
09/30192332 DC 09/30192332 DC. BS EN 31. Wash basins. Connecting dimensions
08/30192315 DC 08/30192315 DC. BS EN 62604-2. Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers. Part 2. Guide to the use
08/30192301 DC 08/30192301 DC. BS EN 60384-26. Fixed capacitors for use in electronic equipment. Part 26. Sectional specification. Aluminium electrolytic capacitors with conductive polymer solid elect
08/30192293 DC 08/30192293 DC. BS EN 60086-5 AMD1. Primary batteries. Part 5. Safety of batteries with aqueous electrolyte
08/30192288 DC 08/30192288 DC. BS EN ISO 179-1. Plastics. Determination of Charpy impact properties. Part 1. Non-instrumented impact test
08/30192282 DC 08/30192282 DC. BS EN 3155-002. Aerospace series. Electrical contacts used in elements of connection. Part 002. List and utilization of contacts
08/30192276 DC 08/30192276 DC. BS ISO 22009. Space systems. Space environment (natural and artificial). Model of the Earths magnetospheric magnetic field
08/30192272 DC 08/30192272 DC. BS EN 60335-1 AMD F4. Household and similar electrical appliances. Safety. Part 1. General requirements
BS EN ISO 7731:2008 BS EN ISO 7731:2008. Ergonomics. Danger signals for public and work areas. Auditory danger signals
08/30192264 DC 08/30192264 DC. BS EN 60335-1 AMD F3. Household and similar electrical appliances. Safety. Part 1. General requirements
BS EN ISO 14738:2008 BS EN ISO 14738:2008. Safety of machinery. Anthropometric requirements for the design of workstations at machinery. Anthropometric requirements for the design of workstations at m
BS EN ISO 13732-3:2008 BS EN ISO 13732-3:2008. Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Cold surfaces
08/30192250 DC 08/30192250 DC. BS EN 60335-1 AMD F2. Household and similar electrical appliances. Safety. Part 1. General requirements
BS EN ISO 13732-1:2008 BS EN ISO 13732-1:2008. Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Hot surfaces
BS EN ISO 15536-1:2008 BS EN ISO 15536-1:2008. Ergonomics. Computer manikins and body templates. General requirements
08/30192220 DC 08/30192220 DC. BS EN 60335-1 AMD F1. Household and similar electrical appliances. Safety. Part 1. General requirements
08/30192184 DC 08/30192184 DC. BS ISO 15928-4. Houses. Description of performance. Part 4. Fire safety
09/30192178 DC 09/30192178 DC. BS ISO/IEC 10373-6 AMD7. Identification cards. Test methods. Part 6. Proximity cards
08/30192173 DC 08/30192173 DC. BS EN 62542. Environmental standardization for electrical and electronic products and systems. Standardization of environmental aspects. Glossary of terms
09/30192146 DC 09/30192146 DC. BS ISO/IEC 14496-15 AMD3. Information technology. Coding of audio-visual objects. Part 15. Advanced Video Coding (AVC) file format
09/30192141 DC 09/30192141 DC. BS ISO/IEC 14496-5 AMD25. Information technology. Coding of audio-visual objects. Part 5. Reference software
09/30192137 DC 09/30192137 DC. BS ISO/IEC 14496-4 AMD37. Information technology. Coding of audio-visual objects. Part 4. Conformance testing
09/30192130 DC 09/30192130 DC. BS ISO/IEC 13818-1 AMD4. Information technology. Part 1. Generic coding of moving pictures and audio. Systems
"09/30192128 DC 09/30192128 DC. BS ISO/IEC 15444-9 AMD4. Information technology. Part 9. JPEG 2000 image coding system. Interactivity tools, APIs and protocols"
09/30192126 DC 09/30192126 DC. BS ISO/IEC 15444-3 AMD1. Information technology. Part 3. JPEG 2000 image coding system. Motion JPEG 2000
08/30192124 DC 08/30192124 DC. BS ISO/IEC 23000-4 AMD2. Information technology. Multimedia application format (MPEG-A). Part 4. Musical slide show application format
08/30192115 DC 08/30192115 DC. BS EN 4473. Aerospace series. Aluminium pigmented coatings for fasteners. Technical specification
08/30192094 DC 08/30192094 DC. BS EN 3911. Aerospace series. Six lobe recess. Geometrical definition
09/30192082 DC 09/30192082 DC. BS ISO/IEC 29160. Information technology. Radio frequency identification for item management. RFID emblem
09/30192045 DC 09/30192045 DC. BS EN 13544-3 AMD1. Respiratory therapy equipment. Part 3. Air entrainment devices
09/30192042 DC 09/30192042 DC. BS EN 13544-2 AMD1. Respiratory therapy equipment. Part 2. Tubing and connectors
09/30192039 DC 09/30192039 DC. BS EN 794-3 AMD2. Lung ventilators. Part 3. Particular requirements for emergency and transport ventilators
09/30192012 DC 09/30192012 DC. BS ISO 22390-1. Timber structures. Laminated veneer lumber (LVL). Part 1. Structural properties
08/30191997 DC 08/30191997 DC. BS ISO 1043-1. Plastics. Symbols and abbreviated terms. Part 1. Basic polymers and their special characteristics
08/30191994 DC 08/30191994 DC. BS ISO 8566-1. Cranes. Cabins and control stations. Part 1. General
08/30191991 DC 08/30191991 DC. BS ISO 8566-3. Cranes. Cabins and control stations. Part 3. Tower cranes
"09/30191982 DC 09/30191982 DC. BS ISO 21748. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation"
ISO/TS22745-13 : 2009 (CDROM) HEADER ED1 ISO/TS22745-13 : 2009 (CDROM) HEADER ED1. ISO/TS 22745-13 Industrial automation systems and integration - Open technical dictionaries and their application to
ISO/TS22745-11 : 2009 (CDROM) HEADER ED1 ISO/TS22745-11 : 2009 (CDROM) HEADER ED1. ISO/TS 22745-11 Industrial automation systems and integration - Open technical dictionaries and their application to
09/30191937 DC 09/30191937 DC. BS ISO 20152-1. Timber structures. Bond performance of adhesives. Part 1. Basic requirements
08/30191907 DC 08/30191907 DC. BS EN 13623. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity against Legionella pneumophila of chemical
BS ISO 16814:2008 BS ISO 16814:2008. Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human occupancy
"08/30191902 DC 08/30191902 DC. BS EN 61204-7 AMD1. Low voltage power supplies, D.C. output. Part 7. Safety requirements"
09/30191895 DC 09/30191895 DC. BS ISO 10810. Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
08/30191891 DC 08/30191891 DC. BS EN 61936-1. Power installations exceeding 1 kV A.C. Part 1. Common rules
08/30191883 DC 08/30191883 DC. BS EN 60401-2. Terms and nomenclature for cores made of magnetically soft ferrite. Part 2. Reference of dimensions
08/30191879 DC 08/30191879 DC. BS EN 3838. Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
09/30191860 DC 09/30191860 DC. BS EN 60601-1-6. Medical electrical equipment. Part 1-6. General requirements for basic safety and essential performance. Collateral standard. Usability
"BS EN ISO 638:2008 BS EN ISO 638:2008. Paper, board and pulps. Determination of dry matter content. Oven-drying method"
BS EN ISO 23328-2:2009 BS EN ISO 23328-2:2009. Breathing system filters for anaesthetic and respiratory use. Non-filtration aspects
08/30191664 DC 08/30191664 DC. BS EN 50522. Earthing of power installations exceeding 1 kV A.C
09/30191644 DC 09/30191644 DC. BS ISO 8820-4. Road vehicles. Fuse-links. Part 4. Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
08/30191626 DC 08/30191626 DC. BS ISO 27186. Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements
09/30191615 DC 09/30191615 DC. BS ISO 4000-1. Passenger car tyres and rims. Part 1. Tyres (metric series)
09/30191612 DC 09/30191612 DC. BS ISO 16992. Passenger car tyres. Spare unit substitutive equipment (SUSE)
08/30191609 DC 08/30191609 DC. BS ISO 14708-6. Implants for surgery. Active implantable medical devices. Part 6. Particular requirements for active implantable medical devices intended to treat tachya
08/30191606 DC 08/30191606 DC. BS ISO 24917. Space systems. General test requirements for launch vehicles
"08/30191603 DC 08/30191603 DC. BS ISO 17103. Agricultural machinery. Rotary disc mowers, rotary drum mowers and flail mowers. Test methods and acceptance criteria for protective skirts"
08/30191462 DC 08/30191462 DC. BS ISO 11783-14. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Part 14. Sequence control
09/30191459 DC 09/30191459 DC. BS ISO 16063-41. Methods for the calibration of vibration and shock transducers. Part 41. Calibration of laser vibrometers
"08/30191453 DC 08/30191453 DC. BS EN 50527-1. Assessment of human exposure at the workplace for persons bearing active implantable medical devices (AIMD) in electric, magnetic and electromagnetic fiel"
"08/30191444 DC 08/30191444 DC. BS ISO 18334. Pallets for materials handling. Quality of assembly of new, wooden, flat pallets"
ISO/TR11954 : 2008 EDTN1 ISO/TR11954 : 2008 EDTN1. ISO/TR11954 : 2008 Fuel cell road vehicles. Maximum speed measurement
08/30191438 DC 08/30191438 DC. BS EN 527-1. Office furniture. Work tables and desks. Part 1. Dimensions
09/30191428 DC 09/30191428 DC. BS EN 61169-41. Radio-frequency connectors. Part 41. Sectional specification for CQA series quick lock R.F. coaxial connectors
09/30191414 DC 09/30191414 DC. BS EN 61169-19. Radio-frequency connectors. Part 19. Sectional specification. Radio frequency coaxial connectors of type SSMB
09/30191398 DC 09/30191398 DC. BS EN 61169-18. Radio-frequency connectors. Part 18. Sectional specification. Radio frequency coaxial connectors of type SSMA
08/30191365 DC 08/30191365 DC. BS EN 50388. Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve
"08/30191345 DC 08/30191345 DC. BS EN 60728-11. Cable networks for television signals, sound signals and interactive services. Part 11. Safety"
08/30191341 DC 08/30191341 DC. BS EN 60670-24 AMD1. Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 24. Particular requirements for enclo
BS 31100:2008 BS 31100:2008. Risk management. Code of practice
08/30191327 DC 08/30191327 DC. BS EN 61029-2-8 AMD. Safety of transportable motor-operated electric tools. Part 2-8. Particular requirements for single spindle vertical moulders
08/30191324 DC 08/30191324 DC. BS EN 61029-2-1 AMD. Safety of transportable motor-operated electric tools. Part 2-1. Particular requirements for circular saw benches
08/30191292 DC 08/30191292 DC. BS EN 62077. Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification
08/30191281 DC 08/30191281 DC. BS EN 60320-2-4 AMD1. Appliance couplers for household and similar general purposes. Part 2-4. Appliance couplers dependent on appliance weight for engagement
08/30191273 DC 08/30191273 DC. BS EN 61977. Fibre optic interconnecting devices and passive components. Fibre optic filters. Generic specification
08/30191251 DC 08/30191251 DC. BS EN 62553. Methods of measurement for digital network. Performance characteristics of terrestrial digital multimedia transmission network
08/30191241 DC 08/30191241 DC. BS EN 60444-6. Measurement of quartz crystal unit parameters. Part 6. Measurement of drive level dependence (DLD)
09/30191222 DC 09/30191222 DC. BS 8902. Responsible sourcing sector certification schemes for construction products. Specification
08/30191216 DC 08/30191216 DC. BS 8523. Operation and management of wardens scheme. Code of practice
PD 5500:2009 PD 5500:2009. Specification for unfired fusion welded pressure vessels
09/30191208 DC 09/30191208 DC. BS 1134-2. Assessment of surface texture. Part 2. Guidance and general information
PD ISO/TR 12885:2008 PD ISO/TR 12885:2008. Nanotechnologies. Health and safety practices in occupational settings relevant to nanotechnologies
"08/30191192 DC 08/30191192 DC. BS EN 60079-20-1. Explosive atmospheres. Part 20-1. Material characteristics. Gas and vapour classification, test methods and data"
08/30191187 DC 08/30191187 DC. BS EN 62358. Ferrite cores. Standard inductance factor (AL) and its tolerance
08/30191168 DC 08/30191168 DC. BS EN 60679-6. Quartz crystal controlled oscillators of assessed quality. Part 6. Phase jitter measurement method for quartz crystal oscillators and SAW oscillators. App
08/30191166 DC 08/30191166 DC. BS EN 60079-25. Explosive atmospheres. Part 25. Intrinsically safe systems
BS 10008:2008 BS 10008:2008. Evidential weight and legal admissibility of electronic information. Specification
08/30191159 DC 08/30191159 DC. BS EN 15886. Conservation of cultural property. Test methods. Colour measurement of surfaces
08/30191156 DC 08/30191156 DC. BS EN 1555-5. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 5. Fitness for purpose of the system
08/30191153 DC 08/30191153 DC. BS EN 1555-4. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 4. Valves
08/30191150 DC 08/30191150 DC. BS EN 1555-3. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 3. Fittings
08/30191147 DC 08/30191147 DC. BS EN 1555-2. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 2. Pipes
08/30191143 DC 08/30191143 DC. BS EN 1555-1. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 1. General
08/30191140 DC 08/30191140 DC. BS EN 13445-4:2002 AMD4. Unfired pressure vessels. Part 4. Fabrication
08/30191137 DC 08/30191137 DC. BS EN 71-1 AMD10. Safety of toys. Part 1. Mechanical and physical properties
09/30191130 DC 09/30191130 DC. BS EN 61967-8. Integrated circuits. Measurement of electromagnetic emissions. Part 8. Measurement of radiated emissions. IC Stripline method
09/30191126 DC 09/30191126 DC. BS EN 62132-8. Integrated circuits. Measurement of electromagnetic immunity. Part 8. Measurement of radiated immunity. IC Stripline method
08/30191123 DC 08/30191123 DC. BS ISO 9362. Banking. Banking telecommunication messages. Bank identifier codes
08/30191001 DC 08/30191001 DC. BS ISO 26433. Digital cinema (D-cinema). XML data types
08/30190998 DC 08/30190998 DC. BS ISO 26431-2. Digital cinema (D-cinema) quality. Part 2. Reference projector and environment
08/30190995 DC 08/30190995 DC. BS ISO 26430-9. Digital cinema (D-cinema) operations. Part 9. Key delivery bundle
08/30190992 DC 08/30190992 DC. BS ISO 26430-6. Digital cinema (D-cinema) operations. Part 6. Auditorium security messages for intra-theater communications
08/30190989 DC 08/30190989 DC. BS ISO 26430-5. Digital cinema (D-cinema) operations. Part 5. Packaging. Security log event class and constraints
08/30190986 DC 08/30190986 DC. BS ISO 26430-4. Digital cinema (D-cinema) operations. Part 4. Log records format
08/30190983 DC 08/30190983 DC. BS ISO 26429-10. Digital cinema (D-cinema) packaging. Part 10. Stereoscopic picture track file
08/30190980 DC 08/30190980 DC. BS ISO 26429-9. Digital cinema (D-cinema) packaging. Part 9. Asset mapping and file segmentation
08/30190977 DC 08/30190977 DC. BS ISO 26429-8. Digital cinema (D-cinema) packaging. Part 8. Packing list
08/30190974 DC 08/30190974 DC. BS ISO 26428-9. Digital cinema (D-cinema) distribution master. Part 9. Image pixel structure level 3. Serial digital interface signal formatting
08/30190971 DC 08/30190971 DC. BS ISO 26428-7. Digital cinema (D-cinema) distribution master. Part 7. Subtitle
08/30190962 DC 08/30190962 DC. BS ISO 3213. Polypropylene (PP) pipes. Effect of time and temperature on expected strength
08/30190957 DC 08/30190957 DC. BS ISO 24617-1. Language resource management. Semantic annotation framework (SemAF). Part 1. Time and events
09/30190947 DC 09/30190947 DC. BS EN 60974-13. Arc welding equipment. Part 13. Return current clamp
09/30190941 DC 09/30190941 DC. BS ISO 10816-4. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 4. Gas turbine sets with fluid-film bearings
09/30190938 DC 09/30190938 DC. BS ISO 7919-4. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Part 4. Gas turbine sets with fluid-film bearings
"09/30190935 DC 09/30190935 DC. BS ISO 10872. Water quality. Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)"
09/30190932 DC 09/30190932 DC. BS ISO 29042-6. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 6. Test bench method for the measurement of the separation efficie
09/30190929 DC 09/30190929 DC. BS ISO 29042-5. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 5. Test bench method for the measurement of the separation efficie
09/30190926 DC 09/30190926 DC. BS ISO 29042-7. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 7. Test bench method for the measurement of the pollutant concentr
08/30190915 DC 08/30190915 DC. BS EN 60745-2-4 AMD. Hand-held motor operated electric tools. Safety. Part 2-4. Particular requirements for sanders and polishers other than disk type
"08/30190912 DC 08/30190912 DC. BS EN 60745-2-3 AMD. Hand-held motor operated electric tools. Safety. Part 2-3. Particular requirements for grinders, polishers and disk-type sanders"
08/30190909 DC 08/30190909 DC. BS EN 60745-2-21 AMD. Hand-held motor operated electric tools. Safety. Part 2-21. Particular requirements for drain cleaners
08/30190906 DC 08/30190906 DC. BS EN 60745-2-20 AMD. Hand-held motor operated electric tools. Safety. Part 2-20. Particular requirements for band saws
08/30190901 DC 08/30190901 DC. BS EN 60745-2-18 AMD. Hand-held motor operated electric tools. Safety. Part 2-18. Particular requirements for strapping tools
08/30190898 DC 08/30190898 DC. BS EN 60745-2-14 AMD. Hand-held motor-operated electric tools. Safety. Part 2-14. Particular requirements for planers
08/30190894 DC 08/30190894 DC. BS EN 60745-2-9 AMD. Hand-held motor operated electric tools. Safety. Part 2-9. Particular requirements for tappers
08/30190887 DC 08/30190887 DC. BS EN 60745-2-8 AMD. Hand-held motor operated electric tools. Safety. Part 2-8. Particular requirements for shears and nibblers
09/30190878 DC 09/30190878 DC. BS 1134-1. Assessment of surface texture. Part 1. Methods and instrumentation. Specification
08/30190852 DC 08/30190852 DC. BS EN 61000-4-21. Electromagnetic compatibility (EMC). Part 4-21. Testing and measurement techniques. Reverberation chamber test methods
ISO29469 : 2008 EDTN1 ISO29469 : 2008 EDTN1. ISO29469 : 2008 Thermal insulating products for building applications - Determination of compression behaviour
PD ISO/TR 11955:2008 PD ISO/TR 11955:2008. Hybrid-electric road vehicles. Guidelines for charge balance measurement
DD ISO/TS 13399-150:2008 DD ISO/TS 13399-150:2008. Cutting tool data representation and exchange. Usage guidelines
PD ISO/TR 28682:2008 PD ISO/TR 28682:2008. Intelligent transport systems. Joint APEC-ISO study of progress to develop and deploy ITS standards
ISO11014 : 2009 EDTN1 ISO11014 : 2009 EDTN1. ISO11014 : 2009 Safety data sheet for chemical products - Content and order of sections
BS ISO 18932:2009 BS ISO 18932:2009. Imaging materials. Adhesive mounting systems. Specifications
ISO494 : 2009 EDTN2 ISO494 : 2009 EDTN2. ISO 494 Cylindrical shank twist drills - Long series
DD ISO/TS 25237:2008 DD ISO/TS 25237:2008. Health informatics. Pseudonymization
"DD ISO/TS 13399-100:2008 DD ISO/TS 13399-100:2008. Cutting tool data representation and exchange. Definitions, principles and methods for reference dictionaries"
BS ISO 15836:2009 BS ISO 15836:2009. Information and documentation. The Dublin Core metadata element set
BS ISO 10816-3:2009 BS ISO 10816-3:2009. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Industrial machines with nominal power above 15 kW and nominal spe
BS ISO 7919-3:2009 BS ISO 7919-3:2009. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Coupled industrial machines
DD ISO/TS 16952-10:2008 DD ISO/TS 16952-10:2008. Technical product documentation. Reference designation system. Power plants
PD ISO/TR 11044:2008 PD ISO/TR 11044:2008. Water quality. Scientific and technical aspects of batch algae growth inhibition tests
PD ISO/TR 1281-1:2008 PD ISO/TR 1281-1:2008. Rolling bearings. Explanatory notes on ISO 281. Basic dynamic load rating and basic rating life
08/30190684 DC 08/30190684 DC. BS ISO 18436-5. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Part 5. Lubricant laboratory technician/ana
"PD ISO/TR 13154:2009 PD ISO/TR 13154:2009. Medical electrical equipment. Deployment, implementation and operational guidelines for indentifying febrile humans using a screening thermograph"
08/30190670 DC 08/30190670 DC. BS ISO 29681. Pulps. Determination of pH of salted water extracts
08/30190667 DC 08/30190667 DC. BS ISO 17267. Intelligent transport systems (ITS). Navigation system application program interface (API)
08/30190666 DC 08/30190666 DC. BS ISO 7752-1. Cranes. Controls. Layout and characteristics. Part 1. General principles
08/30190664 DC 08/30190664 DC. BS ISO 7752-1. Cranes. Controls. Layout and characteristics. Part 1. General principles
08/30190663 DC 08/30190663 DC. BS ISO 7752-3. Cranes. Controls. Layout and characteristics. Part 3. Tower cranes
08/30190661 DC 08/30190661 DC. BS ISO 7752-3. Cranes. Controls. Layout and characteristics. Part 3. Tower cranes
"08/30190636 DC 08/30190636 DC. BS ISO 10961. Gas cylinders. Cylinder bundles. Design, manufacture, identification and testing"
08/30190628 DC 08/30190628 DC. BS ISO 21507. Earth-moving machinery. Performance requirements for nonmetallic fuel tanks
08/30190554 DC 08/30190554 DC. BS ISO 10545-16. Ceramic tiles. Part 16. Determination of small colour differences
08/30190551 DC 08/30190551 DC. BS ISO 10545-6. Ceramic tiles. Part 6. Determination of resistance to deep abrasion for unglazed tiles
08/30190548 DC 08/30190548 DC. BS EN ISO 17054. Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique
08/30190530 DC 08/30190530 DC. BS ISO 14487-2. Pulps. Standard water for physical testing. Part 2. Conductivity 40 mS/m to 150 mS/m
"09/30190527 DC 09/30190527 DC. BS ISO 26162. Systems to manage terminology, knowledge and content. Design, implementation and maintenance of terminology management systems"
08/30190508 DC 08/30190508 DC. BS ISO 12643-4. Graphic technology. Safety requirements for graphic technology equipment and systems. Part 4. Converting equipment and systems
08/30190505 DC 08/30190505 DC. BS ISO 12643-1. Graphic technology. Safety requirements for graphic technology equipment and systems. Part 1. General requirements
08/30190502 DC 08/30190502 DC. BS ISO 18393-1. Thermal insulation products. Determination of ageing by settlement. Part 1. Blown loose fill for ventilated attics
08/30190494 DC 08/30190494 DC. BS ISO 5351. Pulps. Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
08/30190491 DC 08/30190491 DC. BS ISO 11702. Animal and vegetable fats and oils. Enzymatic determination of total sterols content
09/30190483 DC 09/30190483 DC. BS EN 15767-3. Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors. Part 3. Foam devices
09/30190478 DC 09/30190478 DC. BS EN 1147. Portable ladders for fire service use
PD CEN/TR 15855:2009 PD CEN/TR 15855:2009. Construction products. Assessment of release of dangerous substances. Barriers to trade
09/30190431 DC 09/30190431 DC. BS EN 61190-1-3 AMD1. Attachment materials for electronic assembly. Part 1-3. Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for
09/30190385 DC 09/30190385 DC. BS ISO 15765-4. Road vehicles. Diagnostics on Controller Area Networks (CAN). Part 4. Requirements for emissions-related systems
BIP 2181:2008 BIP 2181:2008. Guide to PAS 2050. How to assess the carbon footprint of goods and services
09/30190356 DC 09/30190356 DC. BS EN 60749-40. Semiconductor devices. Mechanical and climatic test methods. Part 40. Board level drop test method using a strain gauge
08/30190352 DC 08/30190352 DC. BS EN ISO 105-D01. Textiles. Tests for colour fastness. Part D01. Colour fastness to dry cleaning using perchloroethylene solvent
09/30190333 DC 09/30190333 DC. BS EN 61400-24. Wind turbines. Part 24. Lightning protection
08/30190311 DC 08/30190311 DC. BS EN 12953-6. Shell boilers. Part 6. Requirements for equipment for the boiler
08/30190305 DC 08/30190305 DC. BS EN 15885. Classification and performance characteristics of techniques for renovation and repair of drains and sewers
08/30190302 DC 08/30190302 DC. BS EN 13044-3. Swap bodies. Marking. Part 3. Other operational marks
08/30190299 DC 08/30190299 DC. BS EN 13044-2. Swap bodies. Marking. Part 2. Markings related to rail operation
08/30190296 DC 08/30190296 DC. BS EN 13044-1. Swap bodies. Marking. Part 1. Markings for identification
BIP 0026:2008 BIP 0026:2008. The complete ISMS Documentation Toolkit CD-ROM and book. A Managers Guide to Data Security and ISO 27001/ISO 27002
BS EN 50216-11:2008 BS EN 50216-11:2008. Power transformer and reactor fittings. Oil and winding temperature indicators
08/30190191 DC 08/30190191 DC. BS EN 60947-4-3 AMD2. Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. AC semiconductor motor controllers and contactors for non-motor lo
BS EN 12649:2008 BS EN 12649:2008. Concrete compactors and smoothing machines. Safety
"DD IEC/PAS 62588:2008 DD IEC/PAS 62588:2008. Marking and labeling of components, PCBs and PCBAs to identify lead(Pb), Pb-free and other attributes"
08/30190030 DC 08/30190030 DC. BS EN 60191-6-21. Mechanical standardization of semiconductor devices. Part 6-21. General rules for the preparation of outline drawings of surface mounted semiconductor
08/30190026 DC 08/30190026 DC. BS EN 60191-6-20. Mechanical standardization of semiconductor devices. Part 6-20. General rules for the preparation of outline drawings of surface mounted semiconductor
08/30189974 DC 08/30189974 DC. BS EN 13245-1. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Part 1. Designation of PVC-U profiles
09/30189968 DC 09/30189968 DC. BS EN 13544-1 AMD1. Respiratory therapy equipment. Part 1. Nebulizing systems and their components
"08/30189949 DC 08/30189949 DC. BS EN 61558-2-20. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Part 2-20. Particular requirements and test"
"08/30189945 DC 08/30189945 DC. BS EN 61558-2-12. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Part 2-12. Particular requirements and test"
09/30189796 DC 09/30189796 DC. BS EN 61300-3-45. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-45. Examinations and measurements. Attenuatio
09/30189791 DC 09/30189791 DC. BS EN 61300-3-44. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-44. Examinations and measurements. Fibre opti
"09/30189756 DC 09/30189756 DC. BS ISO/IEC 18000-3. Information technology. Radio frequency identification for item management. Part 3. Parameters for air interface communications at 13,56 MHz"
09/30189744 DC 09/30189744 DC. BS ISO/IEC 24791-5. Information technology. Radio Frequency Identification (RFID) for item management. Software system infrastructure. Part 5. Device interface
08/30189628 DC 08/30189628 DC. BS EN 10257-2. Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Part 2. Submarine cables
08/30189625 DC 08/30189625 DC. BS EN 10257-1. Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables Part 1. Land cables
08/30189622 DC 08/30189622 DC. BS EN 10223-8. Steel wire and wire products for fences. Part 8. Welded mesh gabion products
08/30189619 DC 08/30189619 DC. BS EN 10223-7. Steel wire and wire products for fences. Part 7. Steel wire welded panels for fencing
08/30189616 DC 08/30189616 DC. BS EN 10223-6. Steel wire and wire products for fences. Part 6. Steel wire chain link fencing
08/30189613 DC 08/30189613 DC. BS EN 10223-5. Steel wire and wire products for fences. Part 5. Steel wire woven hinged joint and knotted mesh fencing
08/30189610 DC 08/30189610 DC. BS EN 10223-4. Steel wire and wire products for fences. Part 4. Steel wire welded mesh fencing
08/30189607 DC 08/30189607 DC. BS EN 10223-3. Steel wire and wire products for fences. Part 3. Hexagonal steel wire mesh products for engineering purposes
"08/30189604 DC 08/30189604 DC. BS EN 10223-2. Steel wire and wire products for fences. Part 2. Hexagonal steel wire netting for agricultural, insulation and fencing purposes"
08/30189601 DC 08/30189601 DC. BS EN 10223-1. Steel wire and wire products for fences. Part 1. Zinc and zinc-alloy coated steel barbed wire
08/30189596 DC 08/30189596 DC. BS EN 12846-2. Bitumen and bituminous binders. Determination of the efflux time by the efflux viscometer. Part 2. Cut-back and fluxed bituminous binders
08/30189593 DC 08/30189593 DC. BS EN 12846-1. Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer. Part 1. Bituminous emulsions
08/30189590 DC 08/30189590 DC. BS EN 13074-1. Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bitumen by evaporation
08/30189584 DC 08/30189584 DC. BS EN 13074-2. Bitumen and bituminous binders. Stabilisation of binder from bituminous emulsion or cut-back or fluxed bitumen after recovery
"09/30189572 DC 09/30189572 DC. BS EN 12864 AMD3. Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4"
08/30189569 DC 08/30189569 DC. BS EN 594. Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
"08/30189566 DC 08/30189566 DC. BS EN 14825. Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part l"
08/30189563 DC 08/30189563 DC. BS EN 15879-1. Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling. Part 1. Direct exch
BIP 2082:2008 BIP 2082:2008. Electricians Guide to the Building Regulations Part P. 2nd Edition
09/30189522 DC 09/30189522 DC. BS ISO 17331 AMD1. Surface chemical analysis. Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their det
08/30189495 DC 08/30189495 DC. BS EN ISO 9117-3. Paints and varnishes. Drying tests. Part 3. Surface-drying test using ballotini
08/30189484 DC 08/30189484 DC. BS EN ISO 9117-2. Paints and varnishes. Drying tests. Part 2. Pressure test for stackability
08/30189427 DC 08/30189427 DC. BS ISO/IEC 29141. Information technology. Tenprint Capture using BioAPI
08/30189276 DC 08/30189276 DC. BS EN 15875. Characterization of waste. Static test for determination of acid potential of sulfidic waste
08/30189270 DC 08/30189270 DC. BS EN 13236. Safety requirements for superabrasive products
"BS 4875-5:2009 BS 4875-5:2009. Strength and stability of furniture. Requirements for strength, durability and stability of tables and trolleys for domestic use"
08/30189225 DC 08/30189225 DC. BS EN ISO 7783. Paints and varnishes. Determination of water-vapour transmission properties. Cup method
08/30189211 DC 08/30189211 DC. PD 6694-1. Recommendations for the design of structures subject to traffic loading to BS EN 1997-1:2004
09/30189153 DC 09/30189153 DC. BS ISO/IEC 14496-5 AMD15. Information technology. Coding of audio-visual objects. Part 5. Reference software
08/30189150 DC 08/30189150 DC. BS EN 13381-4. Test methods for determining the contribution to the fire resistance of structural members. Part 4. Applied passive protection products to steel members
DD IEC/PAS 62601:2009 DD IEC/PAS 62601:2009. Industrial communication networks. Fieldbus Specifications. WIA-PA communication network and communication profile
"08/30189118 DC 08/30189118 DC. BS EN 60317-58. Specifications for particular type of winding wires. Part 58. Polyamide-imide enameled rectangular copper wire, class 220"
"08/30189113 DC 08/30189113 DC. BS EN 60317-57. Specifications for particular type of winding wires. Part 57. Polyamide-imide enameled round copper wire, class 220"
09/30189100 DC 09/30189100 DC. BS EN 60917-2-4. Modular order for the development of mechanical structures for electronic equipment practices. Part 2-4. Sectional specification. Interface coordination
"09/30189092 DC 09/30189092 DC. BS EN 60297-3-106. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 3-106. Adaptation dimensions"
"08/30188904 DC 08/30188904 DC. BS EN 14605 AMD1. Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, inc"

Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/portal/index.asp?typeid=1

http://www.findstandards.info/portal/index.asp?typeid=2

http://www.findstandards.info/portal/index.asp?typeid=3

http://www.findstandards.info/portal/index.asp?typeid=4

http://www.findstandards.info/portal/index.asp?typeid=5