Findstandards.Info

BSI Standards

	BSI Standards(Cheapest & Original) 10

Click to enlarge image

Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

http://www.findstandards.info/portal/index.asp?typeid=1

http://www.findstandards.info/portal/index.asp?typeid=2

http://www.findstandards.info/portal/index.asp?typeid=3

http://www.findstandards.info/portal/index.asp?typeid=4

http://www.findstandards.info/portal/index.asp?typeid=5

BS EN ISO 22442-1:2007 BS EN ISO 22442-1:2007. Medical devices utilizing animal tissues and their derivatives. Application of risk management
"BS EN ISO 22442-2:2007 BS EN ISO 22442-2:2007. Medical devices utilizing animal tissues and their derivatives. Controls on sourcing, collection and handling"
BS EN ISO 22442-3:2007 BS EN ISO 22442-3:2007. Medical devices utilizing animal tissues and their derivatives. Validation of the elimination and/or inactivation of viruses and transmissible spongiform
BS EN ISO 8192:2007 BS EN ISO 8192:2007. Water quality. Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation
BS EN ISO 17872:2007 BS EN ISO 17872:2007. Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
ISO/IEC21000-14 : 2007 EDTN1 ISO/IEC21000-14 : 2007 EDTN1. ISO/IEC21000 : 2007 Information technology - Multimedia Framework (MPEG-21). Part 14:Conformance testing
BS EN 61300-2-22:2007 BS EN 61300-2-22:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Change of temperature
"BS ISO 17792:2006 BS ISO 17792:2006. Milk, milk products and mesophilic starter cultures. Enumeration of citrate-fermenting lactic acid bacteria. Colony-count technique at 25°C"
BS EN ISO 11608-4:2007 BS EN ISO 11608-4:2007. Pen-injectors for medical use. Requirements and test methods for electronic and electromechanical pen-injectors
08/30107200 DC 08/30107200 DC. BS ISO 10241-1. Terminological entries in standards. Part 1. General requirements and examples of presentation
BS ISO 639-5:2008 BS ISO 639-5:2008. Codes for the representation of names of languages. Alpha-3 code for language families and groups
08/30107258 DC 08/30107258 DC. BS ISO 24611. Language resource management. Morpho-syntactic annotation framework
BS ISO/IEC 19794-7:2007 BS ISO/IEC 19794-7:2007. Information technology. Biometric data interchange formats. Signature/sign time series data
PD ISO/IEC TR 19795-3:2007 PD ISO/IEC TR 19795-3:2007. Information technology. Biometric performance testing and reporting. Modality-specific testing
BS ISO/IEC 19795-4:2008 BS ISO/IEC 19795-4:2008. Information technology. Biometric performance testing and reporting. Interoperability performance testing
BS ISO/IEC 24713-1:2008 BS ISO/IEC 24713-1:2008. Information technology. Biometric profiles for interoperability and datainterchange. Overview of biometric systems and biometric profiles
BS ISO/IEC 24713-2:2008 BS ISO/IEC 24713-2:2008. Information technology. Biometric profiles for interoperability and data interchange. Physical access control for employees at airports
BS EN 14399-7:2007 BS EN 14399-7:2007. High-strength structural bolting assemblies for preloading. System HR. Countersunk head bolt and nut assemblies
BS EN 14399-8:2007 BS EN 14399-8:2007. High-strength structural bolting assemblies for preloading. System HV. Hexagon fit bolts and nut assemblies
BS EN 62353:2008 BS EN 62353:2008. Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
BS ISO/IEC 14888-1:2008 BS ISO/IEC 14888-1:2008. Information technology. Security techniques. Digital signatures with appendix. General
BS ISO/IEC 14888-2:2008 BS ISO/IEC 14888-2:2008. Information technology. Security techniques. Digital signatures with appendix. Integer factorization based mechanisms
BS EN 61968-4:2007 BS EN 61968-4:2007. Application integration at electric utilities. System interfaces for distribution management. Interfaces for records and asset management
"BS EN ISO 20815:2008 BS EN ISO 20815:2008. Petroleum, petrochemical and natural gas industries. Production assurance and reliability management"
BS ISO 21349:2007 BS ISO 21349:2007. Space systems. Project reviews
BS EN 54-16:2008 BS EN 54-16:2008. Fire detection and fire alarm systems. Voice alarm control and indicating equipment
"BS EN ISO 15181-3:2007, BS 3900-K3:2007 BS EN ISO 15181-3:2007, BS 3900-K3:2007. Paints and varnishes. Determination of release rate of biocides from antifouling paints. Calculation of the zinc ethyle"
BS EN ISO 11499:2007 BS EN ISO 11499:2007. Dentistry. Single-use cartridges for local anaesthetics
BS EN ISO 13295:2007 BS EN ISO 13295:2007. Dentistry. Mandrels for rotary instruments
BS EN 60068-3-11:2007 BS EN 60068-3-11:2007. Environmental testing. Supporting documentation and guidance. Calculation of uncertainty of conditions in climatic test chambers
BS ISO 3976:2006 BS ISO 3976:2006. Milk fat. Determination of peroxide value
BS EN 1845:2007 BS EN 1845:2007. Footwear manufacturing machines. Footwear moulding machines. Safety requirements
BS EN 13858:2006 BS EN 13858:2006. Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components
08/30110642 DC 08/30110642 DC. BS EN 1071-12. Advanced technical ceramics. Methods of test for ceramic coatings. Part 12. Reciprocating wear test
BS EN ISO 3630-1:2008 BS EN ISO 3630-1:2008. Dentistry. Root-canal instruments. General requirements and test methods
"BS ISO 18517:2005 BS ISO 18517:2005. Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide"
BS EN 61300-2-49:2007 BS EN 61300-2-49:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Connector installation test
BS EN 61300-2-50:2007 BS EN 61300-2-50:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Fibre optic connector proof test with static load
BS EN 61300-2-51:2007 BS EN 61300-2-51:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Fibre optic connector test for transmission with
BS EN 88-1:2007 BS EN 88-1:2007. Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 500 mbar
BS EN 88-2:2007 BS EN 88-2:2007. Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
"08/30111284 DC 08/30111284 DC. BS IEC 62376. Maritime navigation and radiocommunication equipment and systems. Electronic chart system (ECS). Operational and performance requirements, methods of testi"
BS ISO 17714:2007 BS ISO 17714:2007. Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
"BS ISO 11475:2007 BS ISO 11475:2007. Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight)"
BS EN 14910:2007 BS EN 14910:2007. Garden equipment. Walk-behind combustion engine powered trimmers. Safety
BS EN 14909:2006 BS EN 14909:2006. Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics
"BS EN 60664-1:2007 BS EN 60664-1:2007. Insulation coordination for equipment within low-voltage systems. Principles, requirements and tests"
"BS ISO 4409:2007 BS ISO 4409:2007. Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance"
BS ISO 3070-1:2007 BS ISO 3070-1:2007. Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle. Machines with fixed column and movable table
BS ISO 3070-2:2007 BS ISO 3070-2:2007. Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle. Machines with movable column and fixed table
BS ISO 3070-3:2007 BS ISO 3070-3:2007. Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle. Machines with movable column and movable table
BS EN 60312:2008 BS EN 60312:2008. Vacuum cleaners for household use. Methods of measuring the performance
BS ISO 11568-4:2007 BS ISO 11568-4:2007. Banking. Key management (retail). Asymmetric cryptosystems. Key management and life cycle
BS ISO 21771:2007 BS ISO 21771:2007. Gears. Cylindrical involute gears and gear pairs. Concepts and geometry
BS EN 60079-29-1:2007 BS EN 60079-29-1:2007. Explosive atmospheres. Gas detectors. Performance requirements of detectors for flammable gases
"BS EN 60079-29-2:2007 BS EN 60079-29-2:2007. Explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen"
"BS EN 13035-2:2008 BS EN 13035-2:2008. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Storage, handling and transportation equipment outside the"
BS EN 62366:2008 BS EN 62366:2008. Medical devices. Application of usability engineering to medical devices
BS ISO 20473:2007 BS ISO 20473:2007. Optics and photonics. Spectral bands
BS EN 60034-2-1:2007 BS EN 60034-2-1:2007. Rotating electrical machines. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
BS EN 62320-2:2008 BS EN 62320-2:2008. Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS). AIS AtoN Stations. Operational and performance requireme
BS IEC 60747-9:2007 BS IEC 60747-9:2007. Semiconductor devices. Discrete devices. Insulated-gate bipolar transistors (IGBTs)
BS 6472-2:2008 BS 6472-2:2008. Guide to evaluation of human exposure to vibration in buildings. Blast-induced vibration
BS EN 14930:2007 BS EN 14930:2007. Agricultural and forestry machinery and gardening equipment. Pedestrian controlled and hand-held machines. Determination of accessibility of hot surfaces
BS EN 14933:2007 BS EN 14933:2007. Thermal insulation and light weight fill products for civil engineering applications. Factory made products of expanded polystyrene (EPS). Specification
BS EN 14934:2007 BS EN 14934:2007. Thermal insulation and light weight fill products for civil engineering applications. Factory made products of extruded polystyrene foam (XPS). Specification
"BS EN 60079-19:2007 BS EN 60079-19:2007. Explosive atmospheres. Equipment repair, overhaul and reclamation"
"BS ISO 4666-4:2007 BS ISO 4666-4:2007. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Constant-stress flexometer"
BS EN ISO 8330:2008 BS EN ISO 8330:2008. Rubber and plastics hoses and hose assemblies. Vocabulary
BS ISO/IEC 15944-5:2008 BS ISO/IEC 15944-5:2008. Information technology. Business Operational View. Identification and referencing of requirements of jurisdictional domains as sources of external cons
"BS EN ISO 10440-1:2007 BS EN ISO 10440-1:2007. Petroleum, petrochemical and natural gas industries. Rotary-type positive-displacement compressors. Process compressors"
BS EN ISO 16000-7:2007 BS EN ISO 16000-7:2007. Indoor air. Sampling strategy for determination of airborne asbestos fibre concentrations
BS EN 13480-8:2007 BS EN 13480-8:2007. Metallic industrial piping. Additional requirements for aluminium and aluminium alloy piping
BS EN 50410:2008 BS EN 50410:2008. Household and similar electrical appliances. Safety. Particular requirements for decorative robots
BS EN 60745-2-13:2007 BS EN 60745-2-13:2007. Hand-held motor-operated electric tools. Safety. Particular requirements for chain saws.
BS EN 15304:2007 BS EN 15304:2007. Determination of the freeze-thaw resistance of autoclaved aerated concrete
BS EN 573-5:2007 BS EN 573-5:2007. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Codification of standardized wrought products
ISO3941 : 2007 EDTN2 ISO3941 : 2007 EDTN2. ISO3941 : 2007 Classification of fires
BS EN 60601-1-9:2008 BS EN 60601-1-9:2008. Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Requirements for environmentally consciou
BS EN 14989-1:2007 BS EN 14989-1:2007. Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications. Vertical air/flue termi
BS ISO 23935:2006 BS ISO 23935:2006. Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones
DD CEN/TS 13149-3:2007 DD CEN/TS 13149-3:2007. Public transport. Road vehicle scheduling and control systems. WorldFIP message content
"BS ISO 21308-3:2007 BS ISO 21308-3:2007. Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP). General, mass and administrative exchange parameters"
"BS ISO 16653-1:2008 BS ISO 16653-1:2008. Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features. MEWPs with retractable guardrail syst"
BS ISO 1103:2007 BS ISO 1103:2007. Road vehicles. Coupling balls for caravans and light trailers. Dimensions
"BS EN 61689:2007 BS EN 61689:2007. Ultrasonics. Physiotherapy systems. Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz"
BS ISO 14697:2007 BS ISO 14697:2007. Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products
08/30116059 DC 08/30116059 DC. BS ISO 14155. Clinical investigation of medical devices for human subjects. Good clinical practice
BS EN 60974-10:2007 BS EN 60974-10:2007. Arc welding equipment. Electromagnetic compatibility (EMC) requirements
BS EN ISO 15614-3:2008 BS EN ISO 15614-3:2008. Specification and qualification of welding procedures for metallic materials. Welding procedure test. Fusion welding of non-alloyed and low-alloyed cast
BS EN ISO 15614-7:2007 BS EN ISO 15614-7:2007. Specification and qualification of welding procedures for metallic materials. Welding procedure test. Overlay welding
BS ISO 7975:2006 BS ISO 7975:2006. Passenger cars. Braking in a turn. Open-loop test method
"ISO/IECTR24731-1 : 2007 EDTN1 ISO/IECTR24731-1 : 2007 EDTN1. ISO/IEC/TR24731 : 2007 Information technology. Programming languages, their environments and system software interfaces. Extensions to the"
"BS EN ISO 10438-1:2007 BS EN ISO 10438-1:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. General requirements"
"BS EN ISO 10438-2:2007 BS EN ISO 10438-2:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. Special-purpose oil systems"
"BS EN ISO 10438-3:2007 BS EN ISO 10438-3:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. General-purpose oil systems"
"BS EN ISO 10438-4:2007 BS EN ISO 10438-4:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. Self-acting gas seal support sys"
BS EN ISO 389-6:2007 BS EN ISO 389-6:2007. Acoustics. Reference zero for the calibration of audiometric equipment. Reference threshold of hearing for test signals of short duration
BS ISO 10835:2007 BS ISO 10835:2007. Direct reduced iron and hot briquetted iron. Sampling and sample preparation
"BS EN 13040:2007 BS EN 13040:2007. Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted"
BS EN 60645-3:2007 BS EN 60645-3:2007. Electroacoustics. Audiometric equipment. Test signals of short duration
BS EN 14892:2005 BS EN 14892:2005. Transport service. City logistics. Guideline for the definition of limited access to city centres
BS EN 60079-2:2007 BS EN 60079-2:2007. Explosive atmospheres. Equipment protection by pressurized enclosure "p"
BS ISO/IEC 27005:2008 BS ISO/IEC 27005:2008. Information technology. Security techniques. Information security risk management
BS ISO 14397-1:2007 BS ISO 14397-1:2007. Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
BS ISO 14397-2:2007 BS ISO 14397-2:2007. Earth-moving machinery. Loaders and backhoe loaders. Test method for measuring breakout forces and lift capacity to maximum lift height
BS EN 54-24:2008 BS EN 54-24:2008. Fire detection and fire alarm systems. Components of voice alarm systems. Loudspeakers
BS EN 54-25:2008 BS EN 54-25:2008. Fire detection and fire alarm systems. Components using radio links
BS EN 725-5:2007 BS EN 725-5:2007. Advanced technical ceramics. Methods of test for ceramic powders. Determination of particle size distribution
BS EN 725-1:2007 BS EN 725-1:2007. Advanced technical ceramics. Methods of test for ceramic powders. Determination of impurities in alumina
BS EN 725-10:2007 BS EN 725-10:2007. Advanced technical ceramics. Methods of test for ceramic powders. Determination of compaction properties
BS EN 3840:2007 BS EN 3840:2007. Aerospace series. Paints and varnishes. Technical specification
BS EN ISO 14121-1:2007 BS EN ISO 14121-1:2007. Safety of machinery. Risk assessment. Principles
"BS ISO 3739-1:2007 BS ISO 3739-1:2007. Industrial tyres and rims. Pneumatic tyres (metric series) on 5° tapered on flat base rims. Designation, dimensions and marking"
BS ISO 3739-3:2008 BS ISO 3739-3:2008. Industrial tyres and rims. Rims
BS EN 50438:2007 BS EN 50438:2007. Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks
DD CEN ISO/TS 22475-2:2006 DD CEN ISO/TS 22475-2:2006. Geotechnical investigation and testing. Sampling methods and groundwater measurements. Qualification criteria for enterprises and personnel
DD CEN ISO/TS 22475-3:2007 DD CEN ISO/TS 22475-3:2007. Geotechnical investigation and testing. Sampling methods and groundwater measurements. Conformity assessment of enterprises and personnel by thir
BS ISO 16840-2:2007 BS ISO 16840-2:2007. Wheelchair seating. Determination of physical and mechanical characteristics of devices intended to manage tissue integrity. Seat cushions
BS ISO 15529:2007 BS ISO 15529:2007. Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
BS ISO 21013-2:2007 BS ISO 21013-2:2007. Cryogenic vessels. Pressure-relief accessories for cryogenic service. Non-reclosable pressure-relief devices
BS ISO 21013-1:2008 BS ISO 21013-1:2008. Cryogenic vessels. Pressure-relief accessories for cryogenic service. Reclosable pressure-relief valves
BS IEC 60747-4:2007 BS IEC 60747-4:2007. Semiconductor devices. Discrete devices. Microwave diodes and transistors
BS EN ISO 11079:2007 BS EN ISO 11079:2007. Ergonomics of the thermal environment. Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effec
BS ISO 6281:2007 BS ISO 6281:2007. Plain bearings. Testing under conditions of hydrodynamic and mixed lubrication in test rigs
"BS EN 15012:2007 BS EN 15012:2007. Plastics piping systems. Soil and waste discharge systems within the building structure. Performance characteristics for pipes, fittings and their joints"
BS EN 61300-3-42:2008 BS EN 61300-3-42:2008. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Attenuation of single mod
"BS EN 15014:2007 BS EN 15014:2007. Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints"
"BS EN 15015:2007 BS EN 15015:2007. Plastics piping systems. Systems for hot and cold water not intended for human consumption. Performance characteristics for pipes, fittings and their joints"
BS EN 61098:2007 BS EN 61098:2007. Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies
BS IEC 62363:2008 BS IEC 62363:2008. Radiation protection instrumentation. Portable photon contamination meters and monitors
BS ISO 16792:2006 BS ISO 16792:2006. Technical product documentation. Digital product definition data practices
08/30121749 DC 08/30121749 DC. BS ISO/IEC 19757-1. Information technology. Document Schema Definition Languages (DSDL). Part 1. Overview
BS EN 1470:2008 BS EN 1470:2008. Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings
08/30121783 DC 08/30121783 DC. BS ISO/IEC 19757-7. Document Schema Definition Languages (DSDL). Part 7. Character Repertoire Description Language
08/30121799 DC 08/30121799 DC. BS ISO/IEC 18048. Information technology. Topic maps. Query Language (TMQL)
08/30121802 DC 08/30121802 DC. BS ISO/IEC 19756. Information technology. Topic maps. Constraint Language (TMCL)
DD CEN/TS 1591-3:2007 DD CEN/TS 1591-3:2007. Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method for metal to metal contact type flanged joint
BS ISO 17412:2007 BS ISO 17412:2007. Oil of bitter fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare)
BS EN 14989-2:2007 BS EN 14989-2:2007. Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications. Flue and air supply duc
BS EN 15495:2007 BS EN 15495:2007. Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Zone location of AE sources
BS EN 980:2008 BS EN 980:2008. Symbols for use in the labelling of medical devices
BS ISO 12642-2:2006 BS ISO 12642-2:2006. Graphic technology. Input data for characterization of 4-colour process printing. Expanded data set
"BS EN ISO 15181-5:2008, BS 3900-K5:2008 BS EN ISO 15181-5:2008, BS 3900-K5:2008. Paints and varnishes. Determination of release rate of biocides from antifouling paints. Calculation of the tolylfluani"
BS EN 15460:2007 BS EN 15460:2007. Water quality. Guidance standard for the surveying of macrophytes in lakes
BS EN 62282-6-200:2008 BS EN 62282-6-200:2008. Fuel cell technologies. Micro fuel cell power systems. Performance test methods
BS EN 15037-1:2008 BS EN 15037-1:2008. Precast concrete products. Beam-and-block floor systems. Beams
BS EN 60584-3:2008 BS EN 60584-3:2008. Thermocouples. Extension and compensating cables. Tolerances and identification system
BS EN 60793-1-42:2007 BS EN 60793-1-42:2007. Optical fibres. Measurement methods and test procedures. Chromatic dispersion
BS ISO 4992-1:2006 BS ISO 4992-1:2006. Steel castings. Ultrasonic examination. Steel castings for general purposes
BS EN 1041:2008 BS EN 1041:2008. Information supplied by the manufacturer of medical devices
BS EN 61188-5-5:2007 BS EN 61188-5-5:2007. Printed boards and printed board assemblies. Design and use. Attachment (land/joint) considerations. Components with gull- wing leads on four sides
PD 6609:2007 PD 6609:2007. Environmental cleanliness in enclosed spaces. Guide to in situ high efficiency filter leak testing
BS EN 1330-11:2007 BS EN 1330-11:2007. Non-destructive testing. Terminology. Terms used in X-ray diffraction from polycrystalline and amorphous materials
BS EN 60079-1:2007 BS EN 60079-1:2007. Explosive atmospheres. Equipment protection by flameproof enclosures "d"
BS EN ISO 748:2007 BS EN ISO 748:2007. Hydrometry. Measurement of liquid flow in open channels using current-meters or floats
BS EN 15050:2007 BS EN 15050:2007. Precast concrete products. Bridge elements
BS EN 15048-1:2007 BS EN 15048-1:2007. Non-preloaded structural bolting assemblies. General requirements
08/30123706 DC 08/30123706 DC. ISO 22282-1. Geotechnical investigation and testing. Geohydraulic testing. Part 1. General rules
08/30123709 DC 08/30123709 DC. ISO 22282-2. Geotechnical investigation and testing. Geohydraulic testing. Part 2. Water permeability tests in a borehole
BS EN 15048-2:2007 BS EN 15048-2:2007. Non-preloaded structural bolting assemblies. Suitability test
BS EN 62402:2007 BS EN 62402:2007. Obsolescence management. Application guide
BS EN 60086-4:2007 BS EN 60086-4:2007. Primary batteries. Safety of lithium batteries
BS EN 15026:2007 BS EN 15026:2007. Hygrothermal performance of building components and building elements. Assessment of moisture transfer by numerical simulation
BS EN 61300-2-26:2007 BS EN 61300-2-26:2007. Fibre optic interconnecting devices and passive Components. Basic test and measurement procedures. Tests. Salt mist
BS EN ISO 21549-7:2007 BS EN ISO 21549-7:2007. Health informatics. Patient healthcard data. Medication data
BS EN 415-8:2008 BS EN 415-8:2008. Safety of packaging machines. Strapping machines
BS EN 15067:2007 BS EN 15067:2007. Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
BS EN 15193:2007 BS EN 15193:2007. Energy performance of buildings. Energy requirements for lighting
ISO7001 : 2007 EDTN3 ISO7001 : 2007 EDTN3. ISO7001 : 2007 Graphical symbols - Public information symbols
BS EN 60706-5:2007 BS EN 60706-5:2007. Maintainability of equipment. Testability and diagnostic testing
BS EN 15081:2007 BS EN 15081:2007. Industrial valves. Mounting kits for part-turn valve actuator attachment
"BS EN 15049:2007 BS EN 15049:2007. Railway applications. Suspension components. Torsion bar, steel"
BS EN 13032-3:2007 BS EN 13032-3:2007. Measurement and presentation of photometric data of lamps and luminaires. Presentation of data for emergency lighting of work places
BS EN 15069:2008 BS EN 15069:2008. Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
BS EN 61223-2-6:2007 BS EN 61223-2-6:2007. Evaluation and routine testing in medical imaging departments. Constancy tests. Imaging performance of computed tomography X-ray equipment
"BS EN 14678-2:2007 BS EN 14678-2:2007. LPG equipment and accessories. Equipment for liquefied petroleum gas automotive filling stations. Components other than dispensers, and installation requirements"
BS ISO 19973-1:2007 BS ISO 19973-1:2007. Pneumatic fluid power - Assessment of component reliability by testing. General procedures
BS ISO 19973-2:2007 BS ISO 19973-2:2007. Pneumatic fluid power. Assessment of component reliability by testing. Directional control valves
BS ISO 19973-3:2007 BS ISO 19973-3:2007. Pneumatic fluid power. Assessment of component reliability by testing. Cylinders with piston rod
BS ISO 16000-8:2007 BS ISO 16000-8:2007. Indoor air. Determination of local mean ages of air in buildings for characterizing ventilation conditions
BS ISO 10770-3:2007 BS ISO 10770-3:2007. Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
BS EN 10111:2008 BS EN 10111:2008. Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
"BS EN 61557-3:2007 BS EN 61557-3:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Lo"
"BS EN 61557-6:2007 BS EN 61557-6:2007. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures."
"BS EN 61557-8:2007 BS EN 61557-8:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. In"
BS EN 15085-1:2007 BS EN 15085-1:2007. Railway applications. Welding of railway vehicles and components. General
BS EN 15085-2:2007 BS EN 15085-2:2007. Railway applications. Welding of railway vehicles and components. Quality requirements and certification of welding manufacturer
BS EN 15085-3:2007 BS EN 15085-3:2007. Railway applications. Welding of railway vehicles and components. Design requirements
BS EN 15085-4:2007 BS EN 15085-4:2007. Railway applications. Welding of railway vehicles and components. Production requirements
"BS EN 15085-5:2007 BS EN 15085-5:2007. Railway applications. Welding of railway vehicles and components. Inspection, testing and documentation"
BS EN ISO 9920:2007 BS EN ISO 9920:2007. Ergonomics of the thermal environment. Estimation of thermal insulation and water vapour resistance of a clothing ensemble
BS EN ISO 15236-3:2007 BS EN ISO 15236-3:2007. Steel cord conveyor belts. Special safety requirements for belts for use in underground installations
DD ISO/TS 24534-1:2007 DD ISO/TS 24534-1:2007. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Architecture
DD ISO/TS 24534-2:2007 DD ISO/TS 24534-2:2007. Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehicles. Operational requirements
DD CEN ISO/TS 24534-3:2008 DD CEN ISO/TS 24534-3:2008. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Vehicle data
DD CEN ISO/TS 24534-4:2008 DD CEN ISO/TS 24534-4:2008. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Secure communications using asymmetric
PD ISO/TR 22979:2006 PD ISO/TR 22979:2006. Ophthalmic implants. Intraocular lenses. Guidance on assessment of the need for clinical investigation of intraocular lens design modifications
BS EN 61274-1:2008 BS EN 61274-1:2008. Adaptors for fibre optic connectors. Generic specification
BS ISO 10081-4:2007 BS ISO 10081-4:2007. Classification of dense shaped refractory products. Special products
BS 5702-2:2008 BS 5702-2:2008. Guide to statistical process control (SPC) charts for variables. Charts for individual values
BS EN 1568-1:2008 BS EN 1568-1:2008. Fire extinguishing media. Foam concentrates. Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-2:2008 BS EN 1568-2:2008. Fire extinguishing media. Foam concentrates. Specification for high expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-3:2008 BS EN 1568-3:2008. Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-4:2008 BS EN 1568-4:2008. Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to water-miscible liquids
DD CEN/TS 14822-4:2005 DD CEN/TS 14822-4:2005. Health informatics. General purpose information components. Message headers
BS EN 15102:2007 BS EN 15102:2007. Decorative wallcoverings. Roll and panel form products
BS EN 15099-1:2007 BS EN 15099-1:2007. Irrigation techniques. Remote monitoring and control for irrigation systems. General considerations
ISO/IEC18056 : 2007 EDTN3 ISO/IEC18056 : 2007 EDTN3. ISO/IEC18056 : 2007 Information technology - Telecommunications and information exchange between systems - XML Protocol for Computer Supported Tele
BS EN ISO 8308:2008 BS EN ISO 8308:2008. Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
BS EN ISO 7326:2008 BS EN ISO 7326:2008. Rubber and plastics hoses. Assessment of ozone resistance under static conditions
BS ISO 81400-4:2005 BS ISO 81400-4:2005. Wind turbines. Design and specification of gearboxes
08/30126370 DC 08/30126370 DC. BS ISO 80000-1. Quantities and units. Part 1. General
08/30126378 DC 08/30126378 DC. BS ISO 80000-2. Quantities and units. Part 2. Mathematical signs and symbols to be used in the natural sciences and technology
BS ISO 80000-5:2007 BS ISO 80000-5:2007. Quantities and units. Thermodynamics
08/30126399 DC 08/30126399 DC. BS ISO 80000-10. Quantities and units. Part 10. Atomic and nuclear physics
BS EN 60749-38:2008 BS EN 60749-38:2008. Semiconductor devices. Mechanical and climatic test methods. Soft error test method for semiconductor devices with memory
BS EN ISO 20988:2007 BS EN ISO 20988:2007. Air quality. Guidelines for estimating measurement uncertainty
BS EN 1149-5:2008 BS EN 1149-5:2008. Protective clothing. Electrostatic properties. Material performance and design requirements
"BS EN 62256:2008 BS EN 62256:2008. Hydraulic turbines, storage pumps and pump-turbines. Rehabilitation and performance improvement"
"BS ISO 3245:2007 BS ISO 3245:2007. Rolling bearings. Needle roller bearings, drawn cup without inner ring. Boundary dimensions and tolerances"
BS ISO 22889:2007 BS ISO 22889:2007. Metallic materials. Method of test for the determination of resistance to stable crack extension using specimens of low constraint
BS ISO 21318:2007 BS ISO 21318:2007. Plastics. Epoxy resins. Determination of electrical conductivity of aqueous resin extracts
ISO10303-219 : 2007 EDTN1 ISO10303-219 : 2007 EDTN1. ISO10303-219 : 2007 Industrial automation systems and integration - Product data representation and exchange. Part 219:Application protocol:Dimensi
ISO10303-223 : 2008 EDTN1 ISO10303-223 : 2008 EDTN1. ISO10303 : 2008 Industrial automation systems and integration - Product data representation and exchange. Part 223:Application protocol:Exchange of
"BS EN 15096:2008 BS EN 15096:2008. Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical spe"
BS ISO 18225:2007 BS ISO 18225:2007. Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems
"BS EN 1993-3-1:2006 BS EN 1993-3-1:2006. Eurocode 3. Design of steel structures. Towers, masts and chimneys. Towers and masts"
BS ISO 4437:2007 BS ISO 4437:2007. Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications
"BS EN 1993-3-2:2006 BS EN 1993-3-2:2006. Eurocode 3. Design of steel structures. Towers, masts and chimneys. Chimneys"
BS EN ISO 8062-3:2007 BS EN ISO 8062-3:2007. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and mach
BS EN 50486:2008 BS EN 50486:2008. Equipment for use in audio and video door-entry systems
BS ISO 17165-1:2007 BS ISO 17165-1:2007. Hydraulic fluid power. Hose assemblies. Dimensions and requirements
"BS EN 50445:2008 BS EN 50445:2008. Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human"
"BS ISO 6743-15:2007 BS ISO 6743-15:2007. Lubricants, industrial oils and related products (class L). Classification. Family E (Internal combustion engine oils)"
"BS ISO 24254:2007 BS ISO 24254:2007. Lubricants, industrial oils and related products (class L). Family E (internal combustion engine oils). Specifications for oils for use in four-stroke cycle motorc"
"BS EN ISO 15138:2007 BS EN ISO 15138:2007. Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning"
BS ISO 21438-1:2007 BS ISO 21438-1:2007. Workplace atmospheres. Determination of inorganic acids by ion chromatography. Non-volatile acids (sulphuric acid and phosphoric acid)
PD IEC/TR 62258-4:2007 PD IEC/TR 62258-4:2007. Semiconductor die products. Questionnaire for die users and suppliers
BS EN ISO 17510-2:2007 BS EN ISO 17510-2:2007. Sleep apnoea breathing therapy. Masks and application accessories
"BS EN 60454-3-4:2007 BS EN 60454-3-4:2007. Pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Cellulose paper, creped and non-creped, with rubber therm"
"BS EN 60454-3-11:2007 BS EN 60454-3-11:2007. Pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Polyester film combinations with glass filament, creped"
PD CLC/TR 61340-5-2:2008 PD CLC/TR 61340-5-2:2008. Electrostatics. Protection of electronic devices from electrostatic phenomena. User guide
BS ISO 2351-1:2007 BS ISO 2351-1:2007. Assembly tools for screws and nuts. Machine-operated screwdriver bits. Screwdriver bits for slotted head screws
BS ISO 10110-12:2007 BS ISO 10110-12:2007. Optics and photonics. Preparation of drawings for optical elements and systems. Aspheric surfaces
BS EN 61340-3-1:2007 BS EN 61340-3-1:2007. Electrostatics. Methods for simulation of electrostatic effects. Human body model (HBM) electrostatic discharge test waveforms
BS EN 198:2008 BS EN 198:2008. Sanitary appliances. Baths made from crosslinked cast acrylic sheets. Requirements and test methods
BS EN ISO 23667:2007 BS EN ISO 23667:2007. Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing
BS EN 1127-1:2007 BS EN 1127-1:2007. Explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology
BS EN 60079-5:2007 BS EN 60079-5:2007. Explosive atmospheres. Equipment protection by powder filling "q"
DD ISO/TS 21872-2:2007 DD ISO/TS 21872-2:2007. Microbiology of food and animal feeding stuffs. Horizontal method for the detection of potentially enteropathogenic Vibrio spp. Detection of species othe
NA to BS EN 1992-2:2005 NA to BS EN 1992-2:2005. UK National Annex to Eurocode 2. Design of concrete structures. Concrete bridges. Design and detailing rules
NA to BS EN 1993-1-5:2006 NA to BS EN 1993-1-5:2006. UK National Annex to Eurocode 3. Design of steel structures. Plated structural elements
NA to BS EN 1993-1-9:2005 NA to BS EN 1993-1-9:2005. UK National Annex to Eurocode 3. Design of steel structures. Fatigue
NA to BS EN 1993-1-12:2007 NA to BS EN 1993-1-12:2007. UK National Annex to Eurocode 3. Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700
NA to BS EN 1993-2:2006 NA to BS EN 1993-2:2006. UK National Annex to Eurocode 3. Design of structures. Steel bridges
NA to BS EN 1994-1-1:2004 NA to BS EN 1994-1-1:2004. UK National Annex to Eurocode 4. Design of composite steel and concrete structures. General rules and rules for buildings
NA to BS EN 1994-1-2:2005 NA to BS EN 1994-1-2:2005. UK National Annex to Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design
NA to BS EN 1994-2:2005 NA to BS EN 1994-2:2005. UK National Annex to Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges
BS EN ISO 5774:2008 BS EN ISO 5774:2008. Plastic hoses. Textile-reinforced types for compressed-air applications. Specification
NA to BS EN 1992-3:2006 NA to BS EN 1992-3:2006. UK National Annex to Eurocode 2. Design of concrete structures. Liquid retaining and containment structures
BS EN 60601-1-10:2008 BS EN 60601-1-10:2008. Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. Requirements for the development of phy
BS ISO 2846-2:2007 BS ISO 2846-2:2007. Graphic technology. Colour and transparency of printing ink sets for four-colour printing. Coldset offset lithographic printing
BS EN 60793-1-47:2007 BS EN 60793-1-47:2007. Optical fibres. Measurement methods and test procedures. Macrobending loss
BS EN 60793-1-48:2007 BS EN 60793-1-48:2007. Optical fibres. Measurement methods and test procedures. Polarization mode dispersion
BS EN 15242:2007 BS EN 15242:2007. Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration
BS EN 15241:2007 BS EN 15241:2007. Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in commercial buildings
BS EN 15240:2007 BS EN 15240:2007. Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of air-conditioning systems
BS EN 1775:2007 BS EN 1775:2007. Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations
BS EN 13779:2007 BS EN 13779:2007. Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems
ISO10211 : 2007 EDTN1 ISO10211 : 2007 EDTN1. ISO10211 : 2007 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
BS EN 15239:2007 BS EN 15239:2007. Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of ventilation systems
BS EN ISO 9229:2007 BS EN ISO 9229:2007. Thermal insulation. Vocabulary
BS ISO 8426:2008 BS ISO 8426:2008. Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity
BS ISO 8434-2:2007 BS ISO 8434-2:2007. Metallic tube connections for fluid power and general use. 37° flared connectors
"BS ISO 7789:2007 BS ISO 7789:2007. Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities"
BS ISO 19973-4:2007 BS ISO 19973-4:2007. Pneumatic fluid power. Assessment of component reliability by testing. Pressure regulators
"BS ISO 6020-1:2007 BS ISO 6020-1:2007. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Medium series"
"BS ISO 13726:2008 BS ISO 13726:2008. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions"
BS EN 61138:2007 BS EN 61138:2007. Cables for portable earthing and short-circuiting equipment
BS IEC 60191-1:2007 BS IEC 60191-1:2007. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of discrete devices
BS EN 15144:2007 BS EN 15144:2007. Winter maintenance equipment. Terminology. Terms for winter maintenance
BS EN ISO 1520:2006 BS EN ISO 1520:2006. Paints and varnishes. Cupping test
BS EN ISO 1522:2006 BS EN ISO 1522:2006. Paints and varnishes. Pendulum damping test
"BS EN 13321-2:2006 BS EN 13321-2:2006. Open data communication in building automation, controls and building management. Home and building electronic systems. KNXnet/IP Communication"
DD IEC/TS 62306:2006 DD IEC/TS 62306:2006. Ultrasonics. Field characterisation. Test objects for determining temperature elevation in diagnostic ultrasound fields
"BS ISO 21016:2007 BS ISO 21016:2007. Office furniture. Tables and desks. Test methods for the determination of stability, strength and durability"
08/30129210 DC 08/30129210 DC. BS EN ISO 6947. Welds. Working positions. Definitions of angles of slope and rotation
BS EN ISO 9170-1:2008 BS EN ISO 9170-1:2008. Terminal units for medical gas pipeline systems. Terminal units for use with compressed medical gases and vacuum
BS EN ISO 9170-2:2008 BS EN ISO 9170-2:2008. Terminal units for medical gas pipeline systems. Terminal units for anaesthetic gas scavenging systems
BS EN ISO 15002:2008 BS EN ISO 15002:2008. Flow-metering devices for connection to terminal units of medical gas pipeline systems
BS ISO 16253:2007 BS ISO 16253:2007. Watch-cases and accessories. Vapour phase deposited coatings
BS ISO 17059:2007 BS ISO 17059:2007. Oilseeds. Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
"NA to BS EN 1998-1:2004 NA to BS EN 1998-1:2004. UK National Annex to Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings"
"NA to BS EN 1998-4:2006 NA to BS EN 1998-4:2006. UK National Annex to Eurocode 8. Design of structures for earthquake resistance. Silos, tanks and pipelines"
"NA to BS EN 1998-5:2004 NA to BS EN 1998-5:2004. UK National Annex to Eurocode 8. Design of structures for earthquake resistance. Foundations, retaining structures and geotechnical aspects"
"NA to BS EN 1998-6:2005 NA to BS EN 1998-6:2005. UK National Annex to Eurocode 8. Design of structures for earthquake resistance. Towers, masts and chimneys"
BS EN 15162:2008 BS EN 15162:2008. Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws
BS EN 15163:2008 BS EN 15163:2008. Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws
BS EN 15164:2008 BS EN 15164:2008. Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines
ISO10703 : 2007 EDTN2 ISO10703 : 2007 EDTN2. ISO10703 : 2007 Water quality. Determination of the activity concentration of radionuclides. Method by high resolution gamma-ray spectrometry
BS ISO 4360:2008 BS ISO 4360:2008. Hydrometry. Open channel flow measurement using triangular profile weirs
PD IEC/TR 61496-4:2007 PD IEC/TR 61496-4:2007. Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using vision based protective devices (VBPD)
BS EN 60079-26:2007 BS EN 60079-26:2007. Explosive atmospheres. Equipment with equipment protection level (EPL) Ga
ISO22727 : 2007 EDTN1 ISO22727 : 2007 EDTN1. ISO22727 : 2007 Graphical symbols - Creation and design of public information symbols - Requirements
BS EN ISO 22721:2007 BS EN ISO 22721:2007. Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
BS ISO 23559:2007 BS ISO 23559:2007. Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
"BS EN ISO 11833-1:2007 BS EN ISO 11833-1:2007. Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics. Sheets of thickness not less than 1 mm"
BS ISO 15105-1:2007 BS ISO 15105-1:2007. Plastics. Film and sheeting. Determination of gas-transmission rate. Differential-pressure methods
BS EN ISO 15013:2007 BS EN ISO 15013:2007. Plastics. Extruded sheets of polypropylene (PP). Requirements and test methods
"BS ISO 48:2007 BS ISO 48:2007. Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)"
"BS ISO 6943:2007 BS ISO 6943:2007. Rubber, vulcanized. Determination of tension fatigue"
"BS ISO 188:2007 BS ISO 188:2007. Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests"
BS EN 15152:2007 BS EN 15152:2007. Railway applications. Front windscreens for train cabs
ISO22621-1 : 2007 EDTN1 ISO22621-1 : 2007 EDTN1. ISO22621 : 2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (P
ISO22621-2 : 2007 EDTN1 ISO22621-2 : 2007 EDTN1. ISO22621 : 2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) - Polyamide
"08/30130536 DC 08/30130536 DC. BS ISO 2470-1. Paper, board and pulps. Measurement of diffuse blue reflectance factor. Part 1. Indoor daylight conditions (ISO brightness)"
BS ISO/IEC 19794-10:2007 BS ISO/IEC 19794-10:2007. Information technology. Biometric data interchange formats. Hand geometry silhouette data
PAS 74:2008 PAS 74:2008. Internet safety. Access control systems for the protection of children online. Specification
PD ISO/IEC TR 24722:2007 PD ISO/IEC TR 24722:2007. Information technology. Biometrics. Multi-modal and other multibiometric fusion
BS ISO/IEC 19785-3:2007 BS ISO/IEC 19785-3:2007. Information technology. Common biometric exchange formats framework. Patron format specifications
"BS EN 61355-1:2008 BS EN 61355-1:2008. Classification and designation of documents for plants, systems and equipment. Rules and classification tables"
BS ISO 20673:2007 BS ISO 20673:2007. Ships and marine technology. Electric rudder angle indicators
BS EN 62022:2007 BS EN 62022:2007. Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
ISO21129 : 2007 EDTN1 ISO21129 : 2007 EDTN1. ISO21129 : 2007 Hygrothermal performance of building materials and Products. Determination of water vapour transmission Properties. Box methods
BS ISO 4427-3:2007 BS ISO 4427-3:2007. Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Fittings
ISO4427-5 : 2007 EDTN1 ISO4427-5 : 2007 EDTN1. ISO4427 : 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply. Part 5: Fitness for purpose of the system
BS EN ISO 14175:2008 BS EN ISO 14175:2008. Welding consumables. Gases and gas mixtures for fusion welding and allied processes
BS EN ISO 13918:2008 BS EN ISO 13918:2008. Welding. Studs and ceramic ferrules for arc stud welding
BS EN 15190:2007 BS EN 15190:2007. Structural adhesives. Test methods for assessing long term durability of bonded metallic structures
BS EN 725-2:2007 BS EN 725-2:2007. Advanced technical ceramics. Methods of test for ceramic powders. Determination of impurities in barium titanate
"BS EN 598:2007 BS EN 598:2007. Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods"
BS EN 15179:2007 BS EN 15179:2007. Railway applications. Braking. Requirements for the brake system of coaches
ISO/IEC15444-13 : 2008 EDTN1 ISO/IEC15444-13 : 2008 EDTN1. ISO/IEC15444-13 : 2008 Information technology. JPEG 2000 image coding system. An entry level JPEG 2000 encoder
"BS EN ISO 18595:2007 BS EN ISO 18595:2007. Resistance welding. Spot welding of aluminium and aluminium alloys. Weldability, welding and testing"
BS EN 61788-4:2007 BS EN 61788-4:2007. Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti composite superconductors
BS EN 1864:2008 BS EN 1864:2008. Inland navigation vessels. Wheelhouse. Ergonomic and safety requirements
BS EN ISO 17510-1:2007 BS EN ISO 17510-1:2007. Sleep apnoea breathing therapy. Sleep apnoea breathing therapy equipment
PD ISO/TR 12767:2007 PD ISO/TR 12767:2007. Measurement of fluid flow by means of pressure differential devices. Guidelines on the effect of departure from the specifications and operating conditions g
PD ISO/TR 9464:2008 PD ISO/TR 9464:2008. Guidelines for the use of ISO 5167:2003
"BS EN ISO 1307:2008 BS EN ISO 1307:2008. Rubber and plastics hoses. Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses"
ISO23552-1 : 2007 EDTN1 ISO23552-1 : 2007 EDTN1. ISO23552-1 : 2007 Safety and control devices for gas and oil burners and gas and oil appliances. Particular requirements. Part 1. Fuel/air ratio contro
BS EN ISO 21606:2007 BS EN ISO 21606:2007. Dentistry. Elastomeric auxiliaries for use in orthodontics
BS ISO 18434-1:2008 BS ISO 18434-1:2008. Condition monitoring and diagnostics of machines. Thermography. General procedures
BS EN 61788-6:2008 BS EN 61788-6:2008. Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS ISO 12640-3:2007 BS ISO 12640-3:2007. Graphic technology. Prepress digital data exchange. CIELAB standard colour image data (CIELAB/SCID)
BS EN ISO 13478:2007 BS EN ISO 13478:2007. Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test (FST)
"BS EN 15206:2007 BS EN 15206:2007. Vitreous and porcelain enamels. Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron"
BS EN 15198:2007 BS EN 15198:2007. Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
BS EN ISO 14501:2007 BS EN ISO 14501:2007. Milk and milk powder. Determination of aflatoxin M1 content. Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatog
BS EN 61131-2:2007 BS EN 61131-2:2007. Programmable controllers. Equipment requirements and tests
BS EN 15188:2007 BS EN 15188:2007. Determination of the spontaneous ignition behaviour of dust accumulations
BS ISO 6305-2:2007 BS ISO 6305-2:2007. Railway components. Technical delivery requirements. Non-alloy carbon steel baseplates
BS ISO 13319:2007 BS ISO 13319:2007. Determination of particle size distributions. Electrical sensing zone method
BS EN 15217:2007 BS EN 15217:2007. Energy performance of buildings. Methods for expressing energy performance and for energy certification of buildings
BS ISO 22263:2008 BS ISO 22263:2008. Organization of information about construction works. Framework for management of project information
BS EN ISO 7214:2007 BS EN ISO 7214:2007. Cellular plastics. Polyethylene. Methods of test
BS EN 14617-8:2007 BS EN 14617-8:2007. Agglomerated stone. Test methods. Determination of resistance to fixing (dowel hole)
BS EN ISO 10239:2008 BS EN ISO 10239:2008. Small craft. Liquefied petroleum gas (LPG) systems
BS EN 60191-6-13:2007 BS EN 60191-6-13:2007. Mechanical standardization of semiconductor devices. Design guideline of open-top-type sockets for fine-pitch ball grid array and fine-pitch land grid arra
"BS EN 60191-6-16:2007 BS EN 60191-6-16:2007. Mechanical standardization of semiconductor devices. Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA"
"BS ISO 21015:2007 BS ISO 21015:2007. Office furniture. Office work chairs. Test methods for the determination of stability, strength and durability"
BS EN 558:2008 BS EN 558:2008. Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves
BS EN 60679-1:2007 BS EN 60679-1:2007. Quartz crystal controlled oscillators of assessed quality. Generic specification
BS ISO 7992:2007 BS ISO 7992:2007. Iron ores for blast furnace feedstocks. Determination of reduction under load
BS ISO 7215:2007 BS ISO 7215:2007. Iron ores for blast furnace feedstocks. Determination of the reducibility by the final degree of reduction index
"BS ISO 4696-1:2007 BS ISO 4696-1:2007. Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method. Reduction with CO, CO2, H2 and N2"
BS ISO 4696-2:2007 BS ISO 4696-2:2007. Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method. Reduction with CO and N2
BS ISO 4698:2007 BS ISO 4698:2007. Iron ore pellets for blast furnace feedstocks. Determination of the free-swelling index
BS ISO 4700:2007 BS ISO 4700:2007. Iron ore pellets for blast furnace and direct reduction feedstocks. Determination of the crushing strength
BS EN ISO 17078-2:2007 BS EN ISO 17078-2:2007. Petroleum and natural gas industries. Drilling and production equipment. Flow-control devices for side-pocket mandrels
"08/30132222 DC 08/30132222 DC. BS ISO 13534. Petroleum and natural gas industries. Drilling and production equipment. Inspection, maintenance, repair and remanufacture of hoisting equipment"
08/30132226 DC 08/30132226 DC. BS ISO 13535. Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment
PD ISO/TR 11330:1997 PD ISO/TR 11330:1997. Determination of volume of water and water level in lakes and reservoirs
BS EN 13940-1:2007 BS EN 13940-1:2007. Health informatics. System of concepts to support continuity of care. Basic concepts
BS EN ISO 16773-1:2007 BS EN ISO 16773-1:2007. Paints and varnishes. Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens. Terms and definitions
BS EN ISO 16773-2:2007 BS EN ISO 16773-2:2007. Paints and varnishes. Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens. Collection of data
"BS EN ISO 11507:2007, BS 3900-F16:2007 BS EN ISO 11507:2007, BS 3900-F16:2007. Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water"
BS EN ISO 21227-3:2007 BS EN ISO 21227-3:2007. Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging. Evaluation of delamination and corrosion around a scribe
BS ISO 8371:2007 BS ISO 8371:2007. Iron ores for blast furnace feedstocks. Determination of the decrepitation index
"ISO22306 : 2007 EDTN1 ISO22306 : 2007 EDTN1. ISO22306 : 2007 Fibre-reinforced cement pipe, joints and fittings for gravity systems"
BS ISO 15901-3:2007 BS ISO 15901-3:2007. Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Analysis of micropores by gas adsorption
BS EN 13771-2:2007 BS EN 13771-2:2007. Compressors and condensing units for refrigeration. Performance testing and test methods. Condensing units
"BS ISO 1224-1:2007 BS ISO 1224-1:2007. Rolling bearings. Instrument precision bearings. Boundary dimensions, tolerances and characteristics of metric series bearings"
"BS ISO 20515:2007 BS ISO 20515:2007. Rolling bearings. Radial bearings, retaining slots. Dimensions and tolerances"
BS ISO 20516:2007 BS ISO 20516:2007. Rolling bearings. Aligning thrust ball bearings and aligning seat washers. Boundary dimensions
DD CEN/TS 14758-2:2007 DD CEN/TS 14758-2:2007. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD). Guidance for the assessment o
BS EN ISO 14801:2007 BS EN ISO 14801:2007. Dentistry. Implants. Dynamic fatigue test for endosseous dental implants
BS EN 564:2006 BS EN 564:2006. Mountaineering equipment. Accessory cord. Safety requirements and test methods
"BS ISO 20712-2:2007 BS ISO 20712-2:2007. Water safety signs and beach safety flags. Specifications for beach safety flags. Colour, shape, meaning and performance"
BS ISO 3271:2007 BS ISO 3271:2007. Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices
BS ISO 3852:2007 BS ISO 3852:2007. Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density
BS ISO 4695:2007 BS ISO 4695:2007. Iron ores for blast furnace feedstocks. Determination of the reducibility by the rate of reduction index
BS ISO 11256:2007 BS ISO 11256:2007. Iron ore pellets for shaft direct-reduction feedstocks. Determination of the clustering index
BS ISO 11257:2007 BS ISO 11257:2007. Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
"BS ISO 11258:2007 BS ISO 11258:2007. Iron ores for shaft direct-reduction feedstocks. Determination of the reducibility index, final degree of reduction and degree of metallization"
BS ISO 13930:2007 BS ISO 13930:2007. Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by dynamic method
BS ISO 15967:2007 BS ISO 15967:2007. Direct reduced iron. Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
BS EN 60947-1:2007 BS EN 60947-1:2007. Low-voltage switchgear and controlgear. General rules
"BS EN 1092-1:2007 BS EN 1092-1:2007. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges"
BS ISO 20753:2008 BS ISO 20753:2008. Plastics. Test specimens
ISO21847-1 : 2007 EDTN1 ISO21847-1 : 2007 EDTN1. ISO21847-1 : 2007 Nuclear fuel technology. Alpha spectrometry. Part 1: Determination of neptunium in uranium and its compounds
ISO21847-2 : 2007 EDTN1 ISO21847-2 : 2007 EDTN1. ISO21847-2 : 2007 Nuclear fuel technology. Alpha spectrometry. Part 2: Determination of plutonium in uranium and its compounds
ISO21847-3 : 2007 EDTN1 ISO21847-3 : 2007 EDTN1. ISO21847-3 : 2007 Nuclear fuel technology. Alpha spectrometry. Part 3: Determination of uranium 232 in uranium and its compounds
BS EN 1090-3:2008 BS EN 1090-3:2008. Execution of steel structures and aluminium structures. Technical requirements for aluminium structures
BS ISO 21067:2007 BS ISO 21067:2007. Packaging. Vocabulary
BS ISO 21360:2007 BS ISO 21360:2007. Vacuum technology. Standard methods for measuring vacuum-pump performance. General description
BS EN 50382-1:2008 BS EN 50382-1:2008. Railway applications. Railway rolling stock high temperature power cables having special fire performance. General requirements
BS EN 50382-2:2008 BS EN 50382-2:2008. Railway applications. Railway rolling stock high temperature power cables having special fire performance. Single core silicone rubber insulated cables for 120°C
BS ISO 21994:2007 BS ISO 21994:2007. Passenger cars. Stopping distance at straight-line braking with ABS. Open-loop test method
BS EN ISO 5999:2007 BS EN ISO 5999:2007. Flexible cellular polymeric materials. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification
BS EN ISO 8307:2007 BS EN ISO 8307:2007. Flexible cellular polymeric materials. Determination of resilience by ball rebound
PD CLC/TR 50507:2007 PD CLC/TR 50507:2007. Railway applications. Interference limits of existing track circuits used on European railways
BS ISO 230-3:2007 BS ISO 230-3:2007. Test code for machine tools. Determination of thermal effects
ISO12460-1 : 2007 EDTN1 ISO12460-1 : 2007 EDTN1. ISO12460-1 : 2007 Wood-based panels. Determination of formaldehyde release. Part 1: Formaldehyde emission by the 1-cubic-metre chamber method
BS EN 61193-2:2007 BS EN 61193-2:2007. Quality assessment systems. Selection and use of sampling plans for inspection of electronic components and packages
BS EN 60068-2-82:2007 BS EN 60068-2-82:2007. Environmental testing. Tests. Test Tx. Whisker test methods for electronic and electric components
BS EN 62137-1-1:2007 BS EN 62137-1-1:2007. Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Pull strength test
BS EN 61190-1-2:2007 BS EN 61190-1-2:2007. Attachment materials for electronic assembly. Requirements for soldering pastes for high-quality interconnects in electronics assembly
BS EN 61190-1-3:2007 BS EN 61190-1-3:2007. Attachment materials for electronic assembly. Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic solderin
BS EN 860:2007 BS EN 860:2007. Safety of woodworking machines. One side thickness planing machines
BS ISO 3454:2008 BS ISO 3454:2008. Hydrometry. Direct depth sounding and suspension equipment
ISO18213-2 : 2007 EDTN1 ISO18213-2 : 2007 EDTN1. ISO 18213 : 2007 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 2:Data standardization for
ISO18213-1 : 2007 EDTN1 ISO18213-1 : 2007 EDTN1. ISO18213 : 2007 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 1:Procedural Overview
ISO18213-4 : 2008 EDTN1 ISO18213-4 : 2008 EDTN1. ISO 18213-4 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 4: Accurate determination of li
ISO18213-5 : 2008 EDTN1 ISO18213-5 : 2008 EDTN1. ISO 18213-5 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 5: Accurate determination of li
ISO18213-6 : 2008 EDTN1 ISO18213-6 : 2008 EDTN1. ISO 18213-6 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 6: Accurate in-tank determinati
BS 7882:2008 BS 7882:2008. Method for calibration and classification of torque measuring devices
BS ISO 5667-20:2008 BS ISO 5667-20:2008. Water quality. Sampling. Guidance on the use of sampling data for decision making. Compliance with thresholds and classification systems
BS EN ISO 11890-2:2006 BS EN ISO 11890-2:2006. Paints and varnishes. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
BS EN ISO 11998:2006 BS EN ISO 11998:2006. Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings
BS EN 62137-1-2:2007 BS EN 62137-1-2:2007. Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Shear strength test
BS EN ISO 8434-1:2007 BS EN ISO 8434-1:2007. Metallic tube connections for fluid power and general use. 24 degree cone connectors
BS ISO 21398:2007 BS ISO 21398:2007. Hard coal and coke. Guidance to the inspection of mechanical sampling systems
BS EN ISO 21003-3:2008 BS EN ISO 21003-3:2008. Multilayer piping systems for hot and cold water installations inside buildings. Fittings
BS EN ISO 21003-5:2008 BS EN ISO 21003-5:2008. Multilayer piping systems for hot and cold water installations inside buildings. Fitness for purpose of the system
BS EN 10028-7:2007 BS EN 10028-7:2007. Flat products made of steels for pressure purposes. Stainless steels
"BS EN 15251:2007 BS EN 15251:2007. Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and a"
"BS ISO 22915-20:2008 BS ISO 22915-20:2008. Industrial trucks. Verification of stability. Trucks operating with offset load, offset determined by utilisation. Stability tests"
08/30133935 DC 08/30133935 DC. ISO 24173. Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction
08/30133979 DC 08/30133979 DC. BS ISO 23409. Male condoms. Requirements and test methods for condoms made from synthetic materials
BS EN 15254-4:2008 BS EN 15254-4:2008. Extended application of results from fire resistance tests. Non-loadbearing walls. Glazed constructions
"BS ISO 13374-2:2007 BS ISO 13374-2:2007. Condition monitoring and diagnostics of machines. Data processing, communication and presentation. Data processing"
BS EN 12516-4:2008 BS EN 12516-4:2008. Industrial valves. Shell design strength. Calculation method for valve shells manufactured in metallic materials other than steel
BS EN 61800-5-2:2007 BS EN 61800-5-2:2007. Adjustable speed electrical power drive systems. Safety requirements. Functional
BS EN ISO 3411:2007 BS EN ISO 3411:2007. Earth-moving machinery. Physical dimensions of operators and minimum operator space envelope
BS EN 14591-4:2007 BS EN 14591-4:2007. Explosion prevention and protection in underground mines. Protective systems. Automatic extinguishing systems for road headers
BS EN 15233:2007 BS EN 15233:2007. Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
BS ISO 17066:2007 BS ISO 17066:2007. Hydraulic tools. Vocabulary
BS ISO 22900-1:2008 BS ISO 22900-1:2008. Road vehicles. Modular vehicle communication interface (MVCI). Hardware design requirements
BS ISO 24510:2007 BS ISO 24510:2007. Activities relating to drinking water and wastewater services. Guidelines for the assessment and for the improvement of the service to users
BS ISO 24511:2007 BS ISO 24511:2007. Activities relating to drinking water and wastewater services. Guidelines for the management of wastewater utilities and for the assessment of wastewater services
BS ISO 24512:2007 BS ISO 24512:2007. Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water s
BS EN 15243:2007 BS EN 15243:2007. Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems
BS ISO 1726-2:2007 BS ISO 1726-2:2007. Road vehicles. Mechanical couplings between tractors and semi-trailers. Interchangeability between low-coupling tractors and high-volume semi-trailers
BS EN 62271-207:2007 BS EN 62271-207:2007. High-voltage switchgear and controlgear. Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV
BS EN 61071:2007 BS EN 61071:2007. Capacitors for power electronics
BS ISO 23600:2007 BS ISO 23600:2007. Assistive products for persons with vision impairments and persons with vision and hearing impairments. Acoustic and tactile signals for pedestrian traffic lights
BS ISO 22196:2007 BS ISO 22196:2007. Plastics. Measurement of antibacterial activity on plastics surfaces
BS EN 50131-6:2008 BS EN 50131-6:2008. Alarm systems. Intrusion and hold-up systems. Power supplies
BS EN 15255:2007 BS EN 15255:2007. Energy performance of buildings. Sensible room cooling load calculation. General criteria and validation procedures
BS EN 60793-2-10:2007 BS EN 60793-2-10:2007. Optical fibres. Product specifications. Sectional specification for category A1 multimode fibres
BS ISO 11898-5:2007 BS ISO 11898-5:2007. Road vehicles. Controller area network (CAN). High-speed medium access unit with low-power mode
BS EN ISO 14855-1:2007 BS EN ISO 14855-1:2007. Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon
08/30134763 DC 08/30134763 DC. BS ISO/IEC 27004. Information technology. Security techniques. Information security management. Measurement
BS EN 15132:2006 BS EN 15132:2006. Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods
BS ISO 1088:2007 BS ISO 1088:2007. Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
BS EN 13848-5:2008 BS EN 13848-5:2008. Railway applications. Track. Track geometry quality. Geometric quality levels
BS IEC 60987:2007 BS IEC 60987:2007. Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
ISO/IEC14165-251 : 2008 EDTN1 ISO/IEC14165-251 : 2008 EDTN1. ISO/IEC14165-251 : 2008 Information technology. Fibre channel. Part 251. Framing and signalling (FC-FS)
BS EN 351-2:2007 BS EN 351-2:2007. Durability of wood and wood-based products. Preservative-treated solid wood. Guidance on sampling for the analysis of preservative-treated wood
BS EN 61753-021-2:2008 BS EN 61753-021-2:2008. Fibre optic interconnecting devices and passive components performance standard. Grade C/3 single-mode fibre optic connectors for category C. Controlled
BS EN 61753-021-6:2008 BS EN 61753-021-6:2008. Fibre optic interconnecting devices and passive components performance standard. Grade B/2 single-mode fibre optic connectors for category O. Uncontrolle
BS EN 15496:2008 BS EN 15496:2008. Cycles. Requirements and test methods for cycle locks
BS ISO/IEC 24707:2007 BS ISO/IEC 24707:2007. Information technology. Common Logic (CL). A framework for a family of logic-based languages
08/30135616 DC 08/30135616 DC. BS EN 1708-1. Welding. Basic welded joint details in steel. Part 1. Pressurized components
"BS EN 60269-1:2007, BS 88-1:2007 BS EN 60269-1:2007, BS 88-1:2007. Low-voltage fuses. General requirements"
BS EN 60749-37:2008 BS EN 60749-37:2008. Semiconductor devices. Mechanical and climatic test methods. Board level drop test method using an accelerometer
BS EN 15272-2:2007 BS EN 15272-2:2007. Inland navigation vessels. Rope leading. Fairlead
"BS ISO 13292:2006 BS ISO 13292:2006. Copper, lead, zinc and nickel concentrates. Experimental methods for checking the bias of sampling"
BS EN 61753-083-2:2008 BS EN 61753-083-2:2008. Fibre optic interconnecting devices and passive components performance standard. Non-connectorised single-mode fibre optic C-band/L-band WDM devices for
BS EN 15274:2007 BS EN 15274:2007. General purpose adhesives for structural assembly. Requirements and test methods
BS EN 15275:2007 BS EN 15275:2007. Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
08/30135847 DC 08/30135847 DC. BS ISO 9004. Managing for the sustained success of an organization. A quality management approach
"BS EN 15283-1:2008 BS EN 15283-1:2008. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Gypsum boards with mat reinforcement"
"BS EN 15283-2:2008 BS EN 15283-2:2008. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Gypsum fibre boards"
BS IEC 61227:2008 BS IEC 61227:2008. Nuclear power plants. Control rooms. Operator controls
WD/ISO/IEC14496-9 : 2008 (CDROM)HEAD ED2 WD/ISO/IEC14496-9 : 2008 (CDROM)HEAD ED2. ISO/IEC 14496-9 Information technology - Coding of audio-visual objects. Part 9: Reference hardware description
BS ISO 14132-5:2008 BS ISO 14132-5:2008. Optics and photonics. Vocabulary for telescopic systems. Terms for night vision systems
BS ISO 21094:2008 BS ISO 21094:2008. Optics and photonics. Telescopic systems. Specifications for night vision devices
BS EN 13611:2007 BS EN 13611:2007. Safety and control devices for gas burners and gas burning appliances. General requirements
BS EN 161:2007 BS EN 161:2007. Automatic shut-off valves for gas burners and gas appliances
DD CLC/TS 50502:2007 DD CLC/TS 50502:2007. Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and connection systems
BS ISO 18415:2007 BS ISO 18415:2007. Cosmetics. Microbiology. Detection of specified and non-specified microorganisms
BS ISO 18416:2007 BS ISO 18416:2007. Cosmetics. Microbiology. Detection of Candida albicans
BS ISO 11625:2007 BS ISO 11625:2007. Gas cylinders. Safe handling
"BS EN 755-1:2008 BS EN 755-1:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Technical conditions for inspection and delivery"
"BS EN ISO 4628-6:2007, BS 3900-H6:2007 BS EN ISO 4628-6:2007, BS 3900-H6:2007. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensit"
BS EN 1071-6:2007 BS EN 1071-6:2007. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro-abrasion wear test
"BS EN 755-2:2008 BS EN 755-2:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties"